xylem FlexNet CommandLink II Wireless Interface User Guide

Gid rapid
AQG-10087-05
FlexNet CommandLink II

FlexNet CommandLink II Wireless Interface

The CommandLink® II wireless interface provides access to a complete suite of functional controls within a gas, water, or electric SmartPoint® transceiver. This Bluetooth® enabled device, coupled with a handheld, can perform activations, deactivation, meter read, on-demand reads, and audits of the SmartPoint module.

Avètisman: Risk of hot surface. Do not hold the device longer than one (1) minute when operating in an ambient temperature above 40°C (104°F).

Etap 1: Chaje CommandLink II la
You must charge the CommandLink II completely before first use.

1. Plug the charging adapter into a power outlet and connect to the Charging Port located next to the Mag Loop on top of the Command Link II.
   Nòt: Make sure you have rechargeable batteries installed before using a power outlet.
   Inite ki gen pil ki pa rechargeable pa ta dwe janm ploge nan yon priz kouran pou chaje.
2. Endikatè ki ap dirije wouj la limen, sa ki endike inite a ap chaje.
3. Unplug the unit when the red LED is no longer illuminated, indicating the CommandLink II is fully charged.
   Nòt: To power down the CommandLink II immediately, press and hold the power button located on the side of the CommandLink II until the PWR LED turns off.

Etap 2: Limen Command Link II a

1. Peze bouton pouvwa a.
2. Limyè vèt ki ap dirije a limen lè CommandLink II a mache avèk siksè.

Etap 3: Kreye yon patenarya Bluetooth
To use the CommandLink II, you must first establish a Bluetooth partnership with a Windows Mobile, Android, or iOS-equipped handheld device (HHD) or PC.

Kontni pake

• FlexNet CommandLink II
• espageti (2)
• Adaptè chaje (AC/DC)
• Adaptè chaje machin (DC/DC)
• Ka

Si w ap itilize yon aparèy Windows Mobile Portable:

1. Chwazi Kòmanse, Lè sa a, Anviwònman.
2. Select Connections, then select Bluetooth COM.
   Power on the CommandLink II if it is off.
3. Chwazi Dekouvri Aparèy.
   A list of all the Bluetooth-enabled devices in range is generated and displayed.
   If your CommandLink II does not appear in the list, make sure that it is powered on. If it is powered on, power cycle it and select Discover Devices again, and repeat this step.
4. Chwazi ou
   CommandLink II from the list and select Connect.
5. If you are prompted toSet the Bluetooth PIN, enter 0000 and select OK.
6. Chwazi OK pou sòti.
7. Chwazi X nan kwen pi ba dwat pou sòti.
8. Chwazi FieldLogic Tools nan meni Start la.
9. From the FieldLogic Tools main screen, select Menu, and select Options.
10. Chwazi tab la FlexNet epi chwazi CommandLink nan lis deroulan Kalite Aparèy la. Pa chwazi CLxxxxxxx_BLE.
11. Chwazi Jwenn estati. FieldLogic Tools konekte ak CommandLink II a epi montre yon mesaj siksè.
12. Chwazi OK.
13. Chwazi OK ankò pou retounen nan ekran Konekte a.

Si w ap itilize yon Aparèy Android:

1. Chwazi ikòn Anviwònman an.
2. Select Options, then select FlexNet. FieldLogic displays a list of available devices.
3. Chwazi + pou view ekran appariement sistèm lan.AQG – 10007 – 05
4. Chwazi CommandLink II ou (CLxxxxxxxx) nan lis aparèy Bluetooth ki disponib yo.
5. Chwazi Pè. Lè sa a, CommandLink II ou a parèt nan lis Aparèy Pè yo.
6. Retounen nan FieldLogic Tools.
7. Select the newly-paired CommandLink II in the list and select the information symbol.FieldLogic konekte ak CommandLink II a epi li montre yon mesaj siksè.
8. Chwazi Fèmen.
9. Chwazi flèch dèyè a pou w retounen nan ekran prensipal FieldLogic la.

Si w ap itilize yon aparèy iOS ki gen men ou:

1. Chwazi ikòn Anviwònman an.
2. Chwazi Opsyon, apresa chwazi FlexNet. FieldLogic analize pou aparèy la epi apresa montre aparèy ki disponib. Lis la rafrechi otomatikman.
3. Yon fenèt pop-up pèmisyon ap parèt. Chwazi OK.
4. Chwazi CommandLink II ou (CLxxxxxxxx) nan lis aparèy Bluetooth ki disponib yo.
   
5. Select your CommandLink II and then select the information symbol.
6. FieldLogic konekte ak CommandLink II a epi li montre yon mesaj siksè.
7. Chwazi Fèmen pou retounen nan ekran Opsyon yo.
8. Chwazi flèch dèyè a pou w retounen nan ekran prensipal FieldLogic la.

Si w ap itilize yon PC:

1. Pouvwa CommandLink II a.
2. Chwazi icon Bluetooth sou Desktop òdinatè w lan oswa nan meni Kòmanse a.
3. Soti nan fenèt Aparèy Bluetooth, chwazi Ajoute yon aparèy.
4. Òdinatè w la ap chèche aparèy pou ajoute.
5. Select the icon containing the CommandLink II ID number (CLxxxxxxxx).
   Nòt: If two numbers appear, make sure you select CLxxxxxxxx. Do not select CLxxxxxxxx_BLE.
6. Chwazi Next.
7. Your computer confirms the successful addition of the CommandLink II.
8. Chwazi Fèmen pou kontinye.
9. Kòmanse FieldLogic Tools. Soti nan ekran prensipal la, chwazi Zouti epi chwazi Opsyon.
10. Chwazi ekstansyon FlexNet Settings la epi chwazi CommandLink nan lis deroulant Aparèy Kominikasyon an. Chwazi aparèy ou an nan lis non aparèy la.
11. Select Get Status.
    FieldLogic Tools connects with the CommandLink II and displays a success message.
12. Chwazi OK pou retounen nan ekran Opsyon yo.
13. Chwazi OK pou retounen nan ekran Konekte a.

Attach a Strap to the CommandLink II

To attach a strap, slide it in between the slots on the sides of the unit.

AQG – 10007 – 05

Deklarasyon Konfòmite

ATANSYON
Any modifications made to this device that are not approved by Sensus may void the authority granted to the user by the FCC to operate equipment.

ATANSYON
Pou Klas B - Radyatè Envolontè:
This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

ATANSYON
Avi ICES-003 Klas B—Avis NMB-003, Klas B
Aparèy dijital Klas B sa a konfòm ak ICES-003 Kanadyen.

ATANSYON
Nòt: Yo te teste ekipman sa a epi yo jwenn li konfòme yo ak limit pou yon aparèy dijital Klas B, dapre Pati 15 Règ FCC yo.
Limit sa yo fèt pou bay pwoteksyon rezonab kont entèferans danjere nan yon enstalasyon rezidansyèl. Ekipman sa a jenere, itilize, epi yo ka gaye enèji frekans radyo epi, si li pa enstale ak itilize an akò ak enstriksyon yo, ka lakòz entèferans danjere nan kominikasyon radyo. Sepandan, pa gen okenn garanti ke entèferans pa pral rive nan yon enstalasyon an patikilye. Si ekipman sa a lakòz entèferans danjere nan resepsyon radyo oswa televizyon, sa ki ka detèmine pa fèmen ekipman an epi limen, itilizatè a ankouraje pou eseye korije entèferans lan pa youn oswa plis nan mezi sa yo:

• Reoryantasyon oswa deplase antèn k ap resevwa a
• Ogmante separasyon ant ekipman an ak reseptè a
• Konekte ekipman an nan yon priz sou yon sikwi diferan de sa ki reseptè a konekte
• Konsilte konsesyonè a oswa yon teknisyen radyo/televizyon ki gen eksperyans pou èd

ATANSYON
Aparèy sa a konfòm ak estanda RSS ki pa gen lisans endistri Kanada. Operasyon an sijè a de kondisyon sa yo: (1) aparèy sa a pa ka lakòz entèferans, epi (2) aparèy sa a dwe aksepte nenpòt entèferans, enkli entèferans ki ka lakòz operasyon endezirab nan aparèy la.

ATANSYON
This radio transmitter, the Sensus CL201, has been approved by Industry Canada to operate with the antenna types listed below, with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

ATANSYON
Dapre règleman Industry Kanada, transmetè radyo sa a ka sèlman opere lè l sèvi avèk yon antèn ki gen yon kalite ak benefis maksimòm (oswa pi piti) apwouve pou transmetè a pa Industry Canada. Pou diminye entèferans radyo potansyèl pou lòt itilizatè yo, yo ta dwe chwazi kalite antèn la ak benefis li yo ke ekivalan pouvwa izotwòp gaye (eirp) pa plis pase sa ki nesesè pou kominikasyon siksè.

AVÈTISMAN
There is a danger of explosion if batteries are mishandled or incorrectly replaced. On systems with replaceable batteries, replace only with the same manufacturer and type or equivalent type recommended per the instructions provided in the product service manual.
Pa demonte pil oswa eseye rechaje yo deyò sistèm nan. Pa jete pil nan dife.
Jete pil yo byen dapre enstriksyon manifakti a ak règleman lokal yo.

AVÈTISMAN
PA ENSENERE oswa soumèt selil batri yo a yon tanperati ki depase 212 °F. Tretman sa yo ka lakòz rupture selil.

AVÈTISMAN
EXPLOSION HAZARD – BATTERIES MUST ONLY BE CHANGED IN AN AREA KNOWN TO BE NON-HAZARDOUS.

xylem.com
SENSUS | 637 Davis Drive | Morrisville, NC 27560 | 800.638.3748 | sensus.com

©2026 Sensus. All products purchased and services performed are subject to Sensus’ terms of sale, available at either sensus.com/TC or 1-800-638-3748. Sensus reserves the right to modify these terms and conditions in its own discretion without notice to the customer. The Sensus logo is a registered trademark of Sensus.
This document is for informational purposes only, and SENSUS MAKES NO EXPRESS WARRANTIES IN THIS DOCUMENT. FURTHERMORE, THERE ARE NO IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES AS TO FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. ANY USE OF THE PRODUCTS THAT IS NOT SPECIFICALLY PERMITTED HEREIN IS PROHIBITED.