Tuya Z2M ZigBee Switch Module
- Please read the manual carefully and use the product correctly. Thank you for purchasing and using this product. Before using the product, please read the manual carefully and use the product correctly.
- Foto yo nan manyèl sa a yo itilize pou gide operasyon itilizatè a epi yo se pou referans sèlman. Tanpri gade nan pwodwi aktyèl la pou plis detay.
Deskripsyon pwodwi
| Pwotokòl san fil |
Zigbee 3.0 |
| Antre |
AC 85-250V, 50 / 60Hz |
| Sòti |
AC 85-250V, 50 / 60Hz |
| Chaj pouvwa |
≤ 3500W (AC 220V, 16A max) |
| Tanperati travay |
-10 ° C a 55 ° C |
| Gwosè pwodwi |
41 × 20 × 41 mm |
Metòd enstalasyon
- Tanpri fil aparèy la dapre make sou kouvèti a.
ON/OFF prensip fonksyònman:
- Aparèy ki konekte yo travay/sispann atravè kouran fil kouran sou/sou.
- The device must be powered by L and N.
- Warning: Sl and S2 can only be connected to two of the wali switches.
- Sl and S2 cannot connect to strong power, such as Zoro. fire line! Wiring, please turn off the AC power supply!
Konfigirasyon rezo
- Long-press the device “Button” for 3 seconds. and the indicator led flashes rapidly, indicating that the device has entered the network configuration mode.
- Go to the “Add Device” interface on the App Select Gateway Search Device (refer to Zigbee Gateway /APP manual)
- Konsèy: The Zigbee device must connect to the Zigbee gateway to upload data to the SERVER/APP.
- This product supports the Zigbee route (signal repeater) function.
