TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Espesifikasyon

• Modèl: Q103
• Konpatibilite: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Koneksyon: Bluetooth, 2.4G Wireless, USB (Type-C)
• Travay Voltage: DC 3.7V
• Kouran travay: <30mA
• Kouran dòmi: <5uA
• Chaje Voltage/Kounye a: DC 5V/500mA

Depanaj

• Kontwolè a pa konekte:
  • Asire w ke kontwolè a chaje nèt.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Asire w ke Bluetooth aktive sou aparèy ou an.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Bouton pa reponn:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Teste kontwolè a nan yon lòt jwèt oswa aplikasyon.
• Retard Antre:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Minimize entèferans ki soti nan lòt aparèy san fil yo.
  • Try connecting via USB cable if available.
• Kontwolè a pa chaje:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Eseye yon lòt kab Kalite-C oswa adaptè kouran.
  • The LED indicator should show the charging status.

Q103 Dyagram fonksyonèl

1. D-pad bouton
2. X/Y/A/B bouton
3. HOME Reconnect/Power Button
4. PÈ bouton
5. SELECT bouton
6. TURBO bouton
7. Left Joystick/L3 bouton
8. Dwa Joystick/R3 bouton
9. Klè bouton
10. Bouton START
11. Bouton L
12. Bouton L2
13. Kalite-C chaje Port
14. R2 bouton
15. Bouton R
16. Reyajiste twou
17. dirije
18. Chanje mòd

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Genyen 10 ak pi wo a

Bluetooth koneksyon

1. Flip switch la: Chanje nan X pou antre nan mòd X-INPUT.
2. Premye itilizasyon (pèchman pouvwa-sou):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • Dirije a toujou wouj lè rekoneksyon an reyisi.
3. Itilize ankò (Rekoneksyon):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. Dirije a toujou wouj lè rekoneksyon an reyisi.
4. Press the PAIR button to power off the device.

SWITCH Mode

Bluetooth koneksyon

1. Flip switch la: Chanje nan S pou antre nan mòd Chanje a.
2. Premye itilizasyon (pèchman pouvwa-sou):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   Dirije a toujou vèt lè rekoneksyon an reyisi.
3. Itilize ankò (Rekoneksyon):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus pou android

Android 9.0 ak pi wo a

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Premye itilizasyon (pèchman pouvwa-sou):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Itilize ankò (Rekoneksyon):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Peze bouton Pè a pou etenn aparèy la.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Mizajou mikrolojisyèl

1. Konekte V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Anviwònman joystick

• Kalibrasyon Rocker
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Paramèt elektrik

• Travay voltage: DC3.7V
• Travay aktyèl: <30mA
• Dòmi aktyèl: <5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Tan sibstiti: 30 jou (konplètman chaje)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Fonksyon dòmi / reveye:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

Avètisman FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reoryantasyon oswa deplase antèn k ap resevwa a.
• Ogmante separasyon ki genyen ant ekipman ak reseptè a.
• Konekte ekipman an nan yon priz sou yon sikwi diferan de sa ki reseptè a konekte.
• Konsilte konsesyonè a oswa yon teknisyen radyo/televizyon ki gen eksperyans pou èd.

Atansyon: Nenpòt chanjman oswa modifikasyon nan aparèy sa a ki pa apwouve pa klèman pa manifakti a ka anile otorite w pou opere ekipman sa a.
Aparèy sa a konfòm ak pati 15 Règ FCC yo. Operasyon an sijè a de kondisyon sa yo:

1. Aparèy sa a pa ka lakòz entèferans danjere, ak
2. Aparèy sa a dwe aksepte nenpòt entèferans resevwa, enkli entèferans ki ka lakòz operasyon endezirab.

Ekipman sa a konfòme ak limit ekspoze FCC ki tabli pou yon anviwònman san kontwòl. Ekipman sa a ta dwe enstale ak opere ak yon distans minimòm de 0cm ant radyatè a ak kò ou.