Roth-logo

Roth QuickTemp Compact System

Roth-QuickTemp-Compact-System-Product

Espesifikasyon pwodwi

  • Dimansyon: 61 cm x 61 cm x 40 cm
  • Maximum load: 2mm per meter
  • Asanble obligatwa

Roth-QuickTemp-Compact-System-Fig- (1)

Planlæg hvordan Compact pladerne skal udlægges. OBS. Roth-QuickTemp-Compact-System-Fig- (2)

Roth-QuickTemp-Compact-System-Fig- (3)  Always read the full documentation

Roth-QuickTemp-Compact-System-Fig- (4)Pase aspiratè sou anba planche a. Roth-QuickTemp-Compact-System-Fig- (5)

Split the turn plate and lay it first.

Roth-QuickTemp-Compact-System-Fig- (6)

Rainur ant plak yo dwe aliyen.

Roth-QuickTemp-Compact-System-Fig- (7)

Cut plates from the back, remove any burrs.

Roth-QuickTemp-Compact-System-Fig- (8)

Sèvi ak plak transfè pou tiyo manje yo/pou ranpli espas vid yo.

Roth-QuickTemp-Compact-System-Fig- (9)

Vacuum before installation of pipes.

Roth-QuickTemp-Compact-System-Fig- (10)

Enstale tiyo a sere/pre sèk enteryè a nan vire.

Roth-QuickTemp-Compact-System-Fig- (11)

Enstale tiyo yo epi fè tès presyon.

Roth-QuickTemp-Compact-System-Fig- (12)

Vacuum before installation of flooring underlayment

Roth-QuickTemp-Compact-System-Fig- (13)

Flooring underlayment. Avoid overlapping.Roth-QuickTemp-Compact-System-Fig- (14)Lay wood floor at a 90° angle to pipes.

Etap enstalasyon yo

  1. Place component A on a flat surface with dimensions 61 cm x 61 cm.
  2. Attach component B to component A using the provided screws (X mm).
  3. Ensure that the maximum load of 2mm per meter is not exceeded.
  4. Connect component C to the assembly following the designated markings.
  5. Secure all components in place as per the assembly diagram.
  6. Continue adding components in the specified order until the structure is complete.
  7. Check for stability and make adjustments if necessary.
  8. Your product is now ready for use!

FAQ

Ki kapasite chaj maksimòm pwodwi a?

The maximum load capacity is 2mm per meter.

Èske mwen bezwen nenpòt zouti adisyonèl pou asanble?

The assembly requires screws (X mm) provided with the product. No additional tools are necessary.

Èske pwodwi a ka demonte pou depo?

Yes, the product can be disassembled following the reverse order of the installation steps.

Dokiman / Resous

Roth QuickTemp Compact System [pdfGid Enstalasyon
QuickTemp Compact System, QuickTemp, Compact System, System

Referans

Kite yon kòmantè

Adrès imel ou p ap pibliye. Jaden obligatwa yo make *