NOCO Genius Boost
NOCO Genius Boost
 DANJE |
 AVAN ITILIZE, LI, AK KONPRANN ENFÒMASYON SEKIRITE PWODWI.Si w pa swiv enstriksyon yo ka lakòz nan CHÒK ELEKTRIK, EXPLOSION, oswa DIFE, ki ka lakòz SERYE BLESI, LANMO, DOGAJ NAN APARÈY, oswa PWOPRIYETE. Pa jete enfòmasyon sa yo. |
Byenvini.
Mèsi paske w te achte NOCO Genius® Boost™ GB40. Li epi konprann Gid itilizatè a anvan ou opere pwodwi a. Pou kesyon konsènan starter so nou an, view enfòmasyon konplè sou sipò nou an nan www.no.co/support. Pou kontakte NOCO pou sipò pèsonalize (pa disponib nan tout zòn), vizite www.no.co/connect.
Ki sa ki nan bwat la.
• GB40 Lithium Jump Starter
• Mikwo USB kab
• 12V USB Charger
• X Konekte HD Battery Clamps
• Gid Itilizatè & Gid Enfòmasyon ak Garanti
Kontakte NOCO.
Telefòn: 1.800.456.6626
Imèl: support@no.co
Adrès Postal: 30339 Diamond Parkway, #102
Glenwillow, OH 44139
Etazini nan Amerik la
Konsènan GB40.
NOCO Genius® Boost™ GB40 se yon demaraj ityòm-ion ultra-konpak ak pòtab pou machin, bato, motosiklèt, ATV, tondèz, RV, traktè, kamyon, ak plis ankò. Li trè an sekirite pou nenpòt moun ki itilize. Li prezante teknoloji etensèl-prèv ak ranvèse pwoteksyon polarite. GB40 a ka imedyatman sote-kòmanse pifò aplikasyon pou yon sèl batri, jiska 20 fwa sou yon sèl chaj. GB40 a tou ekipe ak yon pake batri USB ak flach ki ap dirije, sa ki fè li zouti ijans final la.
Kòmanse.
GB40 a vini pasyèlman chaje soti nan bwat la epi li bezwen yo dwe konplètman chaje anvan yo itilize. Li ak anpil atansyon epi konprann manyèl pwopriyetè machin nan sou prekosyon espesifik ak metòd rekòmande pou sote machin nan demare. Asire w ke w detèmine voltage ak chimi batri a lè w refere manyèl pwopriyetè batri w la anvan w sèvi ak pwodui sa a. GB40 a se pou sote-kòmanse 12-volt pil plon-asid sèlman.
Konekte ak batri a.
Anvan ou konekte ak batri a, verifye ke ou gen yon batri plon-asid 12volt. GB40 a pa apwopriye pou nenpòt ki lòt kalite batri. Idantifye polarite ki kòrèk la nan tèminal batri yo sou batri a. Tèminal pozitif batri a anjeneral make pa lèt oswa senbòl sa yo (POS, P, +). Tèminal negatif batri a anjeneral make pa lèt oswa senbòl sa yo (NEG, N,-). Pa fè okenn koneksyon ak karburateur la, liy gaz, oswa mens, pati fèy metal. Enstriksyon ki anba yo se pou yon sistèm tè negatif (ki pi komen). Si machin ou an se yon sistèm tè pozitif (trè estraòdinè), swiv enstriksyon ki anba yo nan lòd ranvèse.
1.) Konekte pozitif (wouj) batri HD clamp nan tèminal batri pozitif (POS, P,+).
2.) Konekte negatif (nwa) HD batri clamp a la. negatif (NEG, N,-) tèminal batri oswa chasi machin.
3.) Lè dekonekte, dekonekte nan sekans ranvèse, retire negatif la an premye (oswa pozitif an premye pou sistèm tè pozitif).
So-Kòmanse.
1.) Verifye voltage ak chimi nan batri a.
2.) Konfime batri HD clampyo konekte ak tèminal batri polarite kòrèk yo.
3.) Konekte HD X Connector a GB40 la.
4.) Asire w ke tout chaj kouran veyikil la (limyè, radyo, èkondisyone, elatriye) yo etenn anvan ou eseye sote machin nan.
5.) Peze bouton pouvwa a pou kòmanse so. Tout LED yo pral flache, sa ki endike ke tout LED yo byen fonksyone. Si ou byen konekte ak batri a, White Boost ki ap dirije a ap limen. Si batri a clamps yo konekte nan do, Wouj Erè ki ap dirije a ap limen. Ranvèse koneksyon yo pou efase erè sa a ak Lè sa a, ki ap dirije White Boost la ap limen. White Boost LED la eklere, lè GB40 a pare pou sote machin ou an.
6.) Eseye kòmanse machin nan. Pifò machin yo pral imedyatman kòmanse. Gen kèk machin ki ka mande pou GB40 a konekte pou jiska 30 segonn anvan yo kòmanse. Si veyikil la pa kòmanse touswit, rete tann 20-30 segonn epi eseye ankò. Pa eseye plis pase senk (5) demaraj konsekitif nan yon peryòd kenz (15) minit. Kite GB40 a repoze pou kenz (15) minit anvan ou eseye rekòmanse veyikil la ankò.
7.) Yon fwa ou te kòmanse machin ou, dekonekte batri clamps, epi retire GB40 la.
Low Voltage Batri & Manyèl pase sou desizyon
GB40 la fèt pou sote-kòmanse 12-volt plon-asid pil desann nan 2-vòlt. Si batri ou a anba a 2-vòlt, ranfòse ki ap dirije a pral "Off". Sa a se yon endikasyon ke GB40 a pa ka detekte yon batri. Si ou bezwen so-kòmanse yon batri anba a 2-vòlt gen yon karakteristik Manyèl pase sou desizyon, ki pèmèt ou fòse "Sou" fonksyon an kòmanse so.
ATANSYON.
SÈVI AK MÒD SA A AK SWEN EXTRÈM. MÒD SA A SE POU 12-VOLTS PIL-AID SÈLMAN. AK PWOTEKSYON PWOTEKSYON POU PWOTEKSYON AK PWOTEKSYON POLARITE YO YO ENFIK. PYE ATANSYON ANPIL SOU POLARITE BATRI A AVAN ITILIZE MÒD SA A. PA PÈMÈ BATRI POZITIF AK NEGATIF CLAMPS POU MANYEN OSWA KONEKTE AK LÒT KÒM PWODWI A PRAL GENÈTE SPARK. MÒD SA A ITILIZE YON KOURAN TRÈ GWO (JISKA 1000 AMPS) KI KA KOZE ETENSEN AK GWO CHALÈ SI PA SÈVI BYEN. SI OU PA SÈ SÈ SÈY SÈY SOU ITILIZE MÒD SA A, PA ESEYE EPI CHÈCHE ÈD PWOFESYONÈL.
Anvan w itilize karakteristik Manyèl Override, asire w ke batri HD clamps yo konekte ak tèminal batri polarite ki kòrèk la epi HD X Connect la konekte ak GB40 la. Pou itilize fonksyon Manyèl Override la, peze epi kenbe bouton Manyèl Override (yon ikòn pwen esklamasyon wouj andedan yon sèk wouj) pandan twa (3) segonn. White Boost LED la ap flash "On" ak "Off" ki endike ou te antre avèk siksè nan Manyèl Override epi li pare pou sote-kòmanse machin ou. Si konekte nan polarite ranvèse, LED Erè Wouj la ap limen epi inite a pa pral opere.
ATANSYON:
POWER GB40 "OFF" AVAN DEKONEKTE BATRI CLAMPS. SA PRAL ASSIRE SEKIRITE OU. SONJE AK PWOTEKSYON PWOTEKSYON PWOTEKSYON AK POLARITE LANVÒS YO YO YO ENFIK. Pifò machin yo pral imedyatman kòmanse. Gen kèk machin ki ka mande pou GB40 a konekte pou jiska 30 segonn anvan yo kòmanse. Si veyikil la pa kòmanse touswit, tann 20-30 segonn epi eseye ankò. Pa eseye plis pase senk (5) demaraj konsekitif nan yon peryòd kenz (15) minit. Kite GB40 a repoze pou kenz (15) minit anvan ou eseye rekòmanse veyikil la ankò.
Konprann Charge LEDs.
GB40 a gen kat (4) LED chaj - 25%, 50%, 75% ak 100%. Chaje LED sa yo endike eta chaj entèn batri a (SOC). Gade anba a:
| dirije | Eksplikasyon |
| 25% Wouj ki ap dirije 25% 50% 75% 100%  |
25% Chaj ki ap dirije a pral 'souf' pandan y ap chaje epi yo pral solid Wouj lè batri a entèn yo chaje 25%. |
| 50% Wouj ki ap dirije 25% 50% 75% 100%  |
50% Chaj ki ap dirije a pral 'souf' pandan y ap chaje epi yo pral solid Wouj lè batri a entèn yo chaje 50%. |
| 75% Dirije jòn 25% 50% 75% 100%  |
75% Chaj ki ap dirije a pral 'souf' pandan y ap chaje epi li pral solid jòn lè batri entèn la chaje 75%. |
| 100% Green dirije 25% 50% 75% 100%  |
100% Chaje ki ap dirije a pral 'souf' pandan y ap chaje epi yo pral solid vèt lè batri entèn la konplètman chaje. Lè yo konekte ak yon plato USB, pa gen okenn lòt LED chaj yo pral eklere. Yon fwa yo dekonekte nan plato a, tout kat (4) LED chaj yo pral eklere lè batri entèn la se ant 75% -100%, epi inite a mache "ON". |
Entèfas itilizatè.
1. Entèn Nivo Batri
Endike nivo chaj batri entèn la.
2. Erè ki ap dirije
Limen Wouj si yo detekte polarite ranvèse a, oswa li klere "On" ak "Off" lè tanperati entèn batri a twò wo.
3. Bouton pouvwa
Pouse pou vire inite "On" & "Off".
4. Pouvwa dirije
Limen blan lè inite a "On".
5. Ranfòse dirije
Limen blan lè Boost aktif. Si inite a konekte byen ak yon batri, GB40 a pral otomatikman detekte yon batri epi li pral antre nan mòd Boost (LED ap klere Blan lè karakteristik Manyèl Override a aktif).
6. Manyèl pase sou desizyon bouton
Pou pèmèt, pouse epi kenbe pou twa (3) segonn.
AVÈTISMAN: Enfim pwoteksyon sekirite epi manyèlman fòse Boost "On". Sèlman pou itilize lè yon batri twò ba pou detekte.
7. Limyè Mode bouton
Blete limyè ki ap dirije ultra-klere nan 7 mòd limyè:
100% > 50% > 10% > SOS > Blink > Strobe > Off
Lè rechaje GB40 la.
| dirije | Eksplikasyon |
| 25% Wouj ki ap dirije 25% 50% 75% 100% |
25% Chaj ki ap dirije a pral tou dousman batman "On" ak "Off", lè batri a se mwens pase 25% chaje. Lè batri a chaje 25%, chaj wouj ki ap dirije a ap solid. |
| 50% Wouj ki ap dirije 25% 50% 75% 100% |
50% Chaj ki ap dirije a pral tou dousman batman "On" ak "Off", lè batri a se mwens pase 50% chaje. Lè batri a chaje 50%, chaj wouj ki ap dirije a ap solid. |
| 75% Dirije jòn 25% 50% 75% 100% |
75% Chaj ki ap dirije a pral tou dousman batman "On" ak "Off", lè batri a se mwens pase 75% chaje. Lè batri a chaje 75%, chaj jòn ki ap dirije a ap solid. |
100%Green LED25% 50% 75% 100% |
100% Chaj ki ap dirije a pral tou dousman batman "On" ak "Off", lè batri a se mwens pase 100% chaje. Lè batri a konplètman chaje, LED vèt la ap solid, ak LED chaj 25%, 50% ak 75% ap fèmen "Etenyen". |
Konprann Kondisyon Erè yo.
GB40 a dwe montre yon Kondisyon Erè lè gen yon kondisyon polarite ranvèse prezan, yon batri anba de (2) vòlt oswa batri entèn la surchof. Lè youn nan Kondisyon Erè sa yo prezan, bagay sa yo ap rive:
| Erè | Rezon/Solisyon |
| Erè ki ap dirije Solid Wouj | Ranvèse polarite / Ranvèse koneksyon batri yo. |
| Erè ki ap dirije Koulè wouj ak kab konekte byen |
Batri entèn la twò cho / Pèmèt inite a refwadi. Pote inite a nan yon anviwònman pi fre. |
| Limyè Boost Pa Limen W/Kab Konekte Byen | Batri ki konekte a pi ba pase 2-vòt/ Retire tout chaj, epi eseye ankò, oswa itilize Manyèl Manyèl Mode. |
Chaje GB40 la.
Konekte GB40 a lè l sèvi avèk kab chaj USB ki enkli nan pò USB IN ak plato machin USB a. Li kapab tou rechaje nan nenpòt pò ki mache ak USB, tankou yon adaptè AC, plato machin, laptop, ak plis ankò. Se pò USB IN a 2.1 Amps asire chaje san danje epi efikas nan batri ityòm entèn la. Akòz règleman FCC, nou rekòmande pou pa chaje ak dechaje inite a an menm tan.
Tan chaje.
Tan pou rechaje yon GB40 ap diferan selon nivo egzeyat la ak sous pouvwa yo itilize. Rezilta aktyèl yo ka varye akòz kondisyon batri yo.
| USB Charger Rating | |||
| Tan | .5A | 1A | 2A |
| 12hr | 6hr | 3hr | |
Chaje aparèy USB ou yo.
Ou ka rechaje nòmalman nenpòt aparèy USB, tankou yon smartphone. Konekte kab chaj USB ki enkli nan pò USB OUT la epi konekte ak aparèy USB ou. Kantite fwa ou ka rechaje yon aparèy USB ap varye ant aparèy. Pou tan rechaje, kontakte manifakti aparèy ou an.
Dirije flach.
GB40 a gen yon entegre ultra-klere flach dirije. Li gen sèt (7) mòd limyè ki afekte pèfòmans li yo ak lonjevite: 100%, 50%, 10%, SOS, Blink, Strobe, ak Off. Pou limen flach la ak "Etenyen", sèvi ak bouton Pouvwa a ak icon anpoul limyè a. Peze yon fwa pou limen flach la nan 100% liminozite, ankò pou 50% liminozite (nan 3 segonn), ankò pou 10% liminozite (nan lespas 3 segonn), ankò pou SOS (nan 3 segonn), ankò pou Blink (nan lespas 3 segonn). 3 segonn), ankò pou Strobe (nan 3 segonn) ak benefis pou "Off". Si yo pa chwazi yon mòd limyè nan 40 segonn, li pral rete "On" nan mòd limyè aktyèl la, ak pwochen seleksyon an ap fèmen flach la "Off". Tou depan de seleksyon an mòd, GB40 a pral gen divès nivo pwodiksyon ak ègzekutabl. Chwazi yon nivo pouvwa ki pi ba lè w ap itilize GBXNUMX a pou peryòd tan pwolonje pral pwolonje lavi batri a.
Mòd: 100% > 50% > 10% > SOS > Blink > Strobe > Off
Ekonomize enèji Auto fèmen.
GB40 a gen yon karakteristik ekonomize enèji entegre ki pral otomatikman fèmen inite a apre sèt (7) èdtan. Pou kontinye itilize, tou senpleman pouvwa sou inite a ankò.
Espesifikasyon teknik.
| Entèn batri: | Lityòm-Ion |
| Peak Rating Kouran: | 1000A |
| joules3s | 7000+ |
| Tanperati operasyon: | -30°C pou +50°C |
| Tanperati chaje: | 0°C pou +40°C |
| Tanperati Depo: | -20°C a +50°C (Mwayèn Tanperati) |
| Mikwo USB (Entre): | 5V, 2.1A |
| USB (Sòti): | 5V, 2.1A |
| Pwoteksyon Lojman: | IP65 (avèk pò fèmen) |
| Refwadisman: | Konveksyon natirèl |
| Dimansyon (L x W x H): | 6.7 x 3.2 x 1.7 pous |
| Pwa: |
Pou chaje GB40 a, ploge kab Micro USB enkli nan pò Micro USB sou GB40 a epi ploge lòt bout la nan yon sous pouvwa USB. Limyè ki ap dirije a pral vire wouj pandan y ap chaje, epi li vire vèt lè li konplètman chaje.
Lè konplètman chaje, limyè ki ap dirije a ap vire vèt.
GB40 a pran apeprè 3 èdtan pou chaje konplètman soti nan yon eta chaj 0%.
Teknoloji Spark-prèv se yon karakteristik sekirite ki anpeche etensèl soti nan GB20 a pandan w ap itilize. Sa a se itil espesyalman pou so kòmanse machin ki mache ak gazolin.
Pwoteksyon polarite ranvèse anpeche domaj nan GB20 a si konekte ak yon batri ak polarite ranvèse (negatif konekte ak pozitif oswa pozitif konekte ak negatif). Si sa rive, yon mesaj erè ap parèt sou ekran ki ap dirije a epi pa gen okenn kouran k ap koule nan cl batri aamps.
Wi, ou ka demare machin ou ak GB20 la. Câbles jumper X Connect™ ki enkli yo fèt pou konekte dirèkteman ak tèminal batri machin ou an. Tanpri swiv tout prekosyon sekirite yo lè sote kòmanse machin ou. Toujou mete pwoteksyon pou je epi pa janm kite yon lòt moun manyen tou de clamps nan yon fwa. Pa eseye demarre yon batri ki jele oswa yon batri ki te desann twò ba akòz kondisyon metewolojik ekstrèm (pi ba pase 32°F/0°C). Pa janm konekte cl laamps avèk men mouye oswa nan dlo kanpe, labou, oswa nèj; otreman, yon kout elektrik ka rive. Pa janm kite yon lòt moun manyen tou de clamps nan yon fwa. Pa eseye demarre yon batri ki jele oswa yon batri ki te desann twò ba akòz kondisyon metewolojik ekstrèm (pi ba pase 32°F/0°C). Pa janm konekte cl laamps avèk men mouye oswa nan dlo kanpe, labou, oswa nèj; otreman, yon kout elektrik ka rive. Pa itilize sou pil ki domaje oswa kote etensèl ka prezan (tou pre motè gazolin). Pa itilize si batri a jele oswa domaje nan nenpòt fason. Pa itilize sou pil mouye; otreman, yon kout elektrik ka rive. Pa itilize nan prezans likid oswa gaz ki ka pran dife; sinon, yon eksplozyon ka lakòz blesi pèsonèl ak/oswa domaj pwopriyete. Itilize sèlman sou pil plon-asid 6V ki gen sistèm negatif tè tankou machin, kamyon, traktè, bato ak RV (pa pou itilize sou sistèm 12V tankou motosiklèt). Sèvi ak sèlman pou aplikasyon pou so kòmanse; pa itilize pou rezon chaje. Chaje inite a anvan premye itilize; pa eseye chaje inite a pandan y ap konekte ak yon batri yo sote (sa ka lakòz jenerasyon etensèl). Chaje inite chak 3
Multi-Fonksyon - Li se yon demaraj so machin, bank pouvwa pòtab, ak flach ki ap dirije. Rechaje smartphones, tablèt, ak lòt aparèy USB. Li fasil rechargeable nan nenpòt pò USB ki mache ak pisans nan 3 èdtan nan 2.1-amps. Anplis de sa, yon flach ki ap dirije 100-lumèn entegre ak sèt mòd limyè, ki gen ladan strobe ijans ak SOS.
Lè batri a chaje 75%, LED Charge zoranj la ap solid. 100% Chaj ki ap dirije a pral tou dousman batman "sou" ak "off", lè batri a se mwens pase 100% konplètman chaje. Lè batri a konplètman chaje, LED vèt la pral solid, ak LED chaj yo 25%, 50% ak 75% ap fèmen.
Dirije vèt la k ap flache ap montre plato a se nan pòsyon Optimizasyon chaj la. Sa a ka dire jiska 48 èdtan. li rive imedyatman apre chaj inisyal la fini, ak nenpòt lè pandan antretyen lè plato a ap 'topping' batri a koupe.
Press the Power Button to begin jump starting. All LEDs will flash, indicating that all LEDs are properly functioning. If you are properly connected to the battery, the White Boost LED will illuminate and the four Charge LEDs will start chasing.
Sulfasyon ak mòd reparasyon batri
Reparasyon 12V se yon mòd rekiperasyon batri avanse pou repare ak restore, ansyen, san fè anyen konsa, domaje, stratifye oswa sulfate pil. Se pa tout pil yo ka refè. Batri yo gen tandans vin domaje si yo kenbe nan yon chaj ki ba epi/oswa pa janm bay opòtinite pou resevwa yon chaj konplè
Non, yon batri machin pa janm "twò mouri" pou sote-kòmanse. Si jump-start la pa travay, ou ka gen yon altènatè defo oswa yon batri mouri ki bezwen yon ranplasman.
VIDEO
KONTAK
support@no.co
1.800.456.6626
support@no.co
30339 Diamond Parkway, # 102
Glenwillow, OH 44139
Etazini nan Amerik no.co
GB40.03222015A
NOCO Genius Boost
www.no.co/gb20
Dokiman / Resous
 | Genius Boost |
Referans
- .no.co/connectを.no.co
- .no.co/supportでご確認ください。.no.co
- NOCO | Jump Starters, Chargers, Batteries & Inflatorsnon.co
- NOCO - Supportnon.co
- NOCOwww.no.co
- NOCO | Kòmanse Batri Mouriwww.no.co
- NOCO Support - Support Centerwww.no.co
- Manyèl itilizatèmanual.tools
HELLO MY GB 40 / TI LIMYE JÒN 75% RETE LOU. Mwen pa ka fèmen li ankò. Ki metodoloji pou etenn li.
Mèsi pou sèvis ou. Atelye BECKER.
BONJOUR MON GB 40 / LE PETIT VOYANT JAUNE 75% RESTE allumé. Je n'arrive plus à l'éteindre . Quelle est la méthodologie pour l'éteindre.
Merci de votre service. ATELIER BECKER.
Thank you for your service. BECKER WORKSHOP.</strong></em>
BONJOUR MON GB 40 / LE PETIT VOYANT JAUNE 75% RESTE allumé. Je n'arrive plus à l'éteindre . Quelle est la méthodologie pour l'éteindre.
Merci de votre service. ATELIER BECKER.
How do I turn off the NOCO GB40 when the 75% yellow light stays on?
To turn off your NOCO Genius Boost GB40, follow these steps and considerations based on the manual:
If the unit does not respond to the Power Button and the light remains on indefinitely, it may be experiencing a technical fault. You can contact NOCO support at 1.800.456.6626 oswa imèl support@no.co pou plis asistans.
Read the full Q&A page
I have bought a Nico genius 5 and would like a visual overview of how to use it,
I just don’t understand it at all in written text
Sensèman
Ik heb een Nico genius 5 gekocht en wil graag een visueel overzicht hoe ik hem moet gebruiken,
Alleen in geschreven tekst snap ik er totaal niets van
Vriendelijke groet
I just don't understand it at all in written text
Sincerely<e/em>
Ik heb een Nico genius 5 gekocht en wil graag een visueel overzicht hoe ik hem moet gebruiken,
Alleen in geschreven tekst snap ik er totaal niets van
Vriendelijke groet
How do I use the NOCO Genius 5? I need a visual or simple overview because the text instructions are difficult to understand.
It appears you are asking about the NOCO Genius 5 battery charger, though the manual on this page is for the GB40 Boost jump starter. While they are different products, here is a simplified overview of how to use the Genius 5 charger:
For a visual guide, you can view the official NOCO Genius 5 setup video on YouTube or refer to the diagrams on page 6 of the Genius 5 user manual.
Read the full Q&A page
for my part, the booster displays a flashing light at the connection with the battery, I turn on several times, nothing is done and on several occasions.
what is the problem according to you? the battery is dead?
pour ma part,le booster affiche une lumiere clignotante au raccordement avec la batterie,j’allume plusieurs fois,rien n’est fait et a plusieurs reprises.
c’est quoi le probleme selon vous?la batterie est morte ?
what is the problem according to you? the battery is dead?<e/em>
pour ma part,le booster affiche une lumiere clignotante au raccordement avec la batterie,j'allume plusieurs fois,rien n'est fait et a plusieurs reprises.
c'est quoi le probleme selon vous?la batterie est morte ?
Why is my NOCO Genius Boost showing a flashing light and not working when connected to my battery? Is the battery dead?
Hello, thank you for your question. A flashing light on your NOCO Genius Boost can indicate a few different conditions. Based on your description and your suspicion that the battery might be dead, the most likely issue is that the vehicle's battery voltage is too low for the booster to detect it automatically.
Here are the possible causes and solutions:
How to Jump-Start a Very Low Voltage (Dead) Battery with Manual Override
If your vehicle's battery is dead (below 2-volts), you will need to use the Manual Override feature.
ATANSYON: Use this mode with extreme care. This mode is for 12-volt lead-acid batteries only. In Manual Override mode, the spark-proof and reverse polarity safety features are ANDIKAP. Pay very close attention to the polarity of the battery before using this mode. Do not allow the positive and negative clamps to touch each other, as this will generate sparks. If you are unsure about using this mode, please seek professional help.
Do not attempt more than five (5) consecutive jump-starts within a fifteen (15) minute period. Allow the GB40 to rest for fifteen (15) minutes before attempting to jump-start the vehicle again.
Read the full Q&A page
I want to use my GB 40 to charge my battery. After some time, the lamp lights up green. Do I still have to wait 12 hours or is the battery fully charged when the light turns green?
If you keep the manual button pressed for 3 seconds, nothing happens.
Please advise for a solution
Bon salitasyon
Peter Tischer
Ich möchte mit meinem GB 40 meine Batterie aufladen. Nach einiger Zeit leuchtet die Lampe Grün. Muss ich dann trotzdem 12 Stunden warten oder ist bei Grün die Batterie vollständig geladen?
Wenn die Handbetätigungstaste 3 sec gedrückt halte passiert gar nichts.
Bitte um Info für eine Lösung
Mit freundlichen Grüßen
Peter Tischer
If you keep the manual button pressed for 3 seconds, nothing happens.
Please advise for a solution
Bon salitasyon
Peter Tischer<e/em>
Ich möchte mit meinem GB 40 meine Batterie aufladen. Nach einiger Zeit leuchtet die Lampe Grün. Muss ich dann trotzdem 12 Stunden warten oder ist bei Grün die Batterie vollständig geladen?
Wenn die Handbetätigungstaste 3 sec gedrückt halte passiert gar nichts.
Bitte um Info für eine Lösung
Mit freundlichen Grüßen
Peter Tischer
I want to use my GB40 to charge my battery. After some time, the lamp lights up green. Do I still have to wait 12 hours or is the battery fully charged when the light turns green? If you keep the manual button pressed for 3 seconds, nothing happens. Please advise for a solution.
Thank you for your question. It's important to clarify that the NOCO Genius Boost GB40 is a portable so starter, not a battery charger. Its purpose is to provide a powerful burst of energy to start a vehicle with a low or dead battery. It is not designed to recharge a vehicle's battery over several hours.
To address your specific points:
Solisyon:
If your goal is to start your vehicle, please follow the "Jump Starting" instructions on page 3 of the manual. If your goal is to fully recharge your vehicle's battery, you will need to use a dedicated battery charger, as the GB40 jump starter is not designed for this task.
Read the full Q&A page
hello.
my noco boost plus gb40 has the small red exclamation mark beside the charge led flashing red along with the flashlight flashing.
i cannot turn this off.
please help.
thankyou kyle
my noco boost plus gb40 has the small red exclamation mark beside the charge led flashing red along with the flashlight flashing.
i cannot turn this off.
please help.
thankyou kyle
Why is the red exclamation mark and flashlight flashing on my NOCO Boost Plus GB40, and how do I turn it off?
The small red exclamation mark on your NOCO Boost Plus GB40 is the Erè ki ap dirije. According to the manual, there are two primary reasons this LED flashes red:
Regarding the flashlight flashing, the GB40 has several light modes including SOS, Blink, and Strobe. To turn the flashlight off, press the Power button with the light bulb icon repeatedly until the light turns off. If the unit is unresponsive to button presses while the Error LED is flashing, it is likely in a thermal protection state due to high temperature and must be allowed to cool before it will function normally again.
Read the full Q&A page
Error LED is blinking red when I try to charge unit. It is 30 degrees F. And it’s been in my car for emergencies. I got it out to give it a charge and blinking led stays on.
Why is the Error LED blinking red on my NOCO Genius Boost when I try to charge it in cold weather?
According to the NOCO Genius Boost manual, a blinking red Error LED typically indicates that the internal battery temperature is too high. However, your unit is currently in a 30°F environment, which is below the recommended charging temperature range of 0°C a +40°C (32°F a 104°F).
Pou rezoud pwoblèm sa a:
Once the unit has warmed up to within the safe charging temperature range, the blinking red LED should stop, and you should be able to recharge it using the Micro USB cable.
Read the full Q&A page
My GB40 has a full charge, recognizes when a battery is connected, but will not discharge. Manual mode is the same way. No voltage nan cl laamps
Why is my NOCO GB40 not discharging or providing voltage to la clamps even in manual mode?
If your NOCO GB40 is fully charged and recognizes the battery but will not discharge even in Manual Override mode, please check the following troubleshooting steps based on the user guide:
If the unit still shows no voltage nan cl laamps while the White Boost LED is flashing in Manual Override mode, there may be an internal hardware fault. You can contact NOCO support at 1.800.456.6626 oswa imèl support@no.co pou plis asistans.
Read the full Q&A page
When charging the GB40 will it discharge your car battery by leaving it plugged into the USB port
When charging the GB40, will it discharge the car battery if left plugged into the USB port?
Rechaje a NOCO Genius Boost GB40 through a vehicle's 12V USB port (using the included 12V USB charger) will draw power from the car battery to charge the GB40's internal lithium battery. Whether this will significantly discharge or "drain" your car battery depends on the state of the vehicle:
To prevent accidental discharge of your vehicle's battery, it is generally recommended to recharge the unit while the engine is running or to unplug it once the vehicle is turned off if your car's USB/12V ports remain active.
Read the full Q&A page
pourquoi lorsque j’allume mon gb40 noco la lumière blanche 12 volts ne s’allume pas
Why does the white 12-volt light not turn on when I power up my NOCO GB40?
If the white Ranfòse ki ap dirije (the light indicating the unit is ready to jump start) does not illuminate when you power on your NOCO Genius Boost GB40, it is usually due to one of the following reasons:
If the unit is properly connected to a battery above 2V and no error lights are present, the white Boost LED should illuminate automatically, indicating the GB40 is ready to jump start the vehicle.
Read the full Q&A page