NINGBO RF433M15 Kontwòl Remote Koneksyon WiFi Lojik Rezo

Espesifikasyon

Pwodwi	AT2688 Pendant Light
Karakteristik	WiFi Connection, Scene Modes, Color Adjustment

Remote Control WiFi Connection Network Logic and Function Description

1. Switch button 1 on the top left corner of the remote control, press and hold for 5 seconds within 30 seconds of powering on the product. Pairing: when paired successfully, the product will flash 2 cold white lights to indicate successful pairing. If the product is not paired within the specified time, please power it on again for pairing. After successfully pairing the remote control (default pairing below), press the button briefly to turn on/off the lights.
2. Press and hold the WiFi button 2 in the upper right corner of the remote control for at least 5 seconds to reset the product module’s networking. The product will enter the module’s networking mode and re-pair with the mobile app for networking.
3. Remote control 3 corresponds to a row of 1H, 4H, and 8H buttons. When the corresponding button is pressed, after the product is timed for 1 hour, 4 hours, and 8 hours respectively, the product will automatically turn off the lights.
4. The middle ring of remote control 4 corresponds to warm white light on the left side of Warm, and short press the color temperature (adjust the color temperature to warm white light by 10% once, and finally reach the warm white light color temperature). The Cool on the right side of the circular ring corresponds to the cool white light of the product, as well as the function of short pressing the color temperature (adjusting the color temperature of the cool white light by 10% corresponding to one press, and finally reaching the warm white light color temperature).
5. Press the button on the circular ring to increase the brightness of the product. Press once to increase the brightness by 10%, and finally reach 100% brightness. Press the button on the circular ring to lower the brightness of the product. Press once to lower the brightness of the corresponding product 10%, ultimately reaching a brightness of 10%.
6. The 5 Scene mode buttons in the middle of the circular ring switch product scene modes, corresponding to the mobile APP scene modes. Press once to switch one scene, for a total of 8 scenes.
7. Separate 6 rows of color buttons: Red, Green, Blue. Press the corresponding button to convert the product into the corresponding light.
8. Long strip with 7 color tones – hue, short press +/- button. The product switches back and forth from red light (- button lowest color) – green light – blue light to pink light (+ button highest color), with 10 colors.
9. Currently applicable product: AT2688 pendant light
   • (1) Aparèy sa a pa ka lakòz entèferans danjere, epi (2) aparèy sa a dwe aksepte nenpòt entèferans resevwa, enkli entèferans ki ka lakòz operasyon endezirab.

Deklarasyon FCC

Aparèy klas B:

REMAK: Yo te teste ekipman sa a epi yo jwenn li konfòme yo ak limit pou yon aparèy dijital Klas B, dapre pati 15 Règ FCC yo. Limit sa yo fèt pou bay pwoteksyon rezonab kont entèferans danjere nan yon enstalasyon rezidansyèl. Ekipman sa a jenere, itilize ak ka gaye enèji frekans radyo epi, si li pa enstale ak itilize an akò ak enstriksyon yo, ka lakòz entèferans danjere nan kominikasyon radyo. Sepandan, pa gen okenn garanti ke entèferans pa pral rive nan yon enstalasyon an patikilye. Si ekipman sa a lakòz entèferans danjere nan resepsyon radyo oswa televizyon, sa ki ka detèmine pa fèmen ekipman an epi limen, itilizatè a ankouraje pou eseye korije entèferans lan pa youn oswa plis nan mezi sa yo:

• Reoryantasyon oswa deplase antèn k ap resevwa a.
• Ogmante separasyon ki genyen ant ekipman ak reseptè a.
• Konekte ekipman an nan yon priz sou yon sikwi diferan de sa ki reseptè a konekte.
• Konsilte konsesyonè a oswa yon teknisyen radyo/televizyon ki gen eksperyans pou èd.

Avètisman: Chanjman oswa modifikasyon pati ki responsab pou konfòmite pa apwouve pa ekspreseman kapab anile otorite itilizatè a pou opere ekipman an.

Aparèy sa a konfòm ak pati 15 Règ FCC yo. Operasyon an sijè a de kondisyon sa yo:

1. Aparèy sa a pa ka lakòz entèferans danjere.
2. Aparèy sa a dwe aksepte nenpòt entèferans resevwa, enkli entèferans ki ka lakòz operasyon endezirab.

Deklarasyon Ekspozisyon RF
Yo te evalye aparèy la pou satisfè egzijans jeneral ekspoze RF. Aparèy la ka itilize nan kondisyon ekspoze pòtab san restriksyon.

Deklarasyon IC
Aparèy sa a gen ladann transmetè (yo)/reseptè (yo) ki pa gen lisans ki konfòme ak RSS (yo) ki pa gen lisans pou Inovasyon, Syans ak Devlopman Ekonomik Kanada. Operasyon an sijè a de kondisyon sa yo:

1. Aparèy sa a pa ka lakòz entèferans.
2. Aparèy sa a dwe aksepte nenpòt entèferans, enkli entèferans ki ka lakòz operasyon endezirab aparèy la.

FAQ

• K: Kisa mwen ta dwe fè si aparèy la lakòz entèferans?
  A: If you experience interference issues, try relocating the device to a different area. Ensure it is not placed near other electronic devices that may be causing the interference.
• K: Èske mwen ka modifye aparèy la nan nenpòt fason?
  A: No, any changes or modifications not approved by the responsible party may void your authority to operate the equipment. Consult a professional if modifications are necessary.

Dokiman / Resous

NINGBO RF433M15 Kontwòl Remote Koneksyon WiFi Lojik Rezo [pdfManyèl Itilizatè 2BAT7RF433M15, rf433m15, RF433M15 Kontwòl a Distans Koneksyon WiFi Lojik Rezo, RF433M15, Kontwòl a Distans Koneksyon WiFi Lojik Rezo, Koneksyon WiFi Lojik Rezo, Lojik Rezo, Lojik

Referans

• Manyèl itilizatè