Volim Konstan MEAN-WELL PWM-120-12 Seritage PWM Sòti ki ap dirije chofè

Antre AC: 100-240Vac (pou DA2-Type sèlman)

Manyèl itilizatè a

Karakteristik

• Vol konstantage pwodiksyon style PWM
• Aplikasyon ekleraj ijans ki disponib selon IEC61347-2-13
• Fonksyon PFC aktif entegre ak konsepsyon klas II
• No load power consumption <O.5W/ standby power consumption <O.5W(DA/DA2-type)
• Konplètman encapsulé ak nivo IP67
• Opsyon fonksyon: 3 nan 1 gradyasyon (dim-a-off); DALI/DALl-2
• Nivo gradyasyon minimòm 0.2% pou kalite DALI
• Tipik pou tout lavi> 50000 èdtan ak 5 ane garanti

Aplikasyon

• Ki ap dirije ekleraj teren
• Andedan kay la ki ap dirije ekleraj
• Dirije ekleraj dekoratif
• Dirije ekleraj achitekti
• Endistriyèl ekleraj
• Tape "HL" pou itilize nan klas l, divizyon 2 kote danjere (klasifye).

KÒD GTIN

MW Search: https://www.meanwell.com/serviceGTlN.aspx

Deskripsyon

Seri PWM-120 se yon chofè 120W AC/DC ki ap dirije ki gen konstan voltage mode with P WM style output, which is able to maintain the color temperature and the brightness homogeneity when driving all kinds of LED strips. PWM-120 operates from 90—305VAC and offers models with different rated voltage ranging between 12V and 48V. Thanks to the high efficiency up to 90.5%, with the fanless design, the entire series is able to operate for -40 C +90 C case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for dry, damp oswa kote ki mouye. PWM-120 ekipe ak fonksyon gradyasyon ki varye sik devwa pwodiksyon an, bay gwo fleksibilite pou aplikasyon pou bann dirije.

Modèl kodaj

SPESIFIKASYON

MODEL		PWM-120-12	PWM-120-24	PWM-120-36	PWM-120-48
SOTI	DC VOLTAGE	12V	24V	36V	48V
	RATED KOURAN	10A	5A	3.4A	2.5A
	POUVWA RATED	120W	120W	122.4W	120W
	DIMMING RANJ	0 ~ 100%
	PWM FREKWANS (tip.)	1.47kHz pou Blank/DA-Type, 2.5kHz pou DA2-Type
	ENFUPMASYON, monte tan Remak.2 Remak.9	500ms, 80ms/230VAC oswa 115VAC
	KANPE TAN (Tip.)	16ms / 230VAC oswa 115VAC
Antre	VOLTAGE GAMA Remak.3	90 ~ 305VAC 127 ~ 431VDC (Tanpri al gade nan seksyon "KARAKTERISTIK ESTATIK").
	RANJE frekans	47 ~ 63Hz
	FAKTÈ POUVWA (tipik)	PF> 0.97 / 115VAC, PF> 0.96 / 230VAC, PF> 0.93 / 277VAC @ plen chaj (Tanpri, al gade nan seksyon "FAKTÈ POUVWA (PF) KARATERISTIK").
	TOTAL HARMONIK DISTORSYON	THD<20%(@chaj≧60%/115VAC, 230VAC; @chaj≧75%/277VAC) (Tanpri al gade seksyon "TOTAL distòsyon amonik")
	EFIKASANS (Tip.)	88.5%	90%	90%	90.5%
	KOURAN AC (Tip.)	1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
	KOURAN kouran (tip.)	FROID START 60A (lajè = 520μs mezire nan 50% Ipeak) nan 230VAC; Dapre NEMA 410
	MAX. NON. nan PSU sou 16A CIRCUIT BREAKER	4 inite (disjoncteur sikwi tip B) / 6 inite (disjoncteur sikwi tip C) nan 230VAC
	KOURAN FIT	<0.25mA / 277VAC
	PA KONSOMYON ENERGIS CHAJ/STANDBY	Pa gen chaj pouvwa konsomasyon <0.5w pou kalite vid; konsomasyon pouvwa sibstiti <0.5W pou DA-tip / DA2-kalite
PWOTEKSYON	SOUCHARGE	108 ~ 130% pouvwa pwodiksyon rated
		Mòd okèt, refè otomatikman apre yo fin retire kondisyon fay la
	SIKON KOUT	12V / 24V mòd okèt ak 36V / 48V mòd fèmen (ki gen ladan DA-kalite / eksepte pou DA2-kalite) Mòd okèt, refè otomatikman apre yo fin retire kondisyon fay (sèlman pou DA2-kalite)
	KONTINYE VOLTAGE	15 ~ 17V	28 ~ 34V	41 ~ 46V	54 ~ 60V
		Fèmen o/p voltage, re-pouvwa sou refè
	SOU TANPERATI	Fèmen o/p voltage, re-pouvwa sou refè
ANVIWÒNMAN	TRAVAY TEMP.	Tcase=-40~+90℃ (Tanpri gade seksyon "CHAJ SORTIE vs TANPERATI")
	MAX. TEMP CASE.	Tcase = + 90 ℃
	Imidite travay	20 ~ 95% RH ki pa kondansasyon
	DEPO TEMP., Imidite	-40 ~ + 80 ℃, 10 ~ 95% RH
	Temp. Koyefisyan	±0.03%/℃ (0 ~ 45℃, eksepte 0 ~ 40℃ pou 12V)
	VIBRATION	10 ~ 500Hz, 5G 12min./1cycle, peryòd pou 72min. chak ansanm aks X, Y, Z
SEKIRITE & EMC	SEKIRITE ESTANDA Remak.5	UL8750( type ”HL” )(except for 12DA type), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 independent, IP67,BIS IS 15885(Part2/Sec13)(for 12,24 Blank and DA2 Type), EAC TP TC 004, GB19510.1,GB19510.14 approved; Design refer to BS EN/EN60335-1; According to BS EN/EN61347-2-13 appendix J suitable for emergency installations(EL)(AC Input: 100-240Vac)(for DA2-Type only)
	DALI STANDARDS	IEC62386-101, 102, 207,251 pou DA/DA2-Type sèlman, Aparèy tip 6(DT6)
	SISPANN VOLTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
	Izolasyon rezistans	I/PO/P: 100M Ohms / 500VDC / 25℃ / 70% RH
	EMC EMISYON  Remak.6	Konfòmite ak BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load≧60%); BS EN/EN61000-3-3, GB/T 17743, GB17625.1; EAC TP TC 020
	EMC IMINITE	Konfòmite ak BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, nivo endistri limyè (iminite vag liy-liy 2KV), EAC TP TC 020
LÒT	MTBF	2243.7K èdtan min. Telcordia SR-332 (Bellcore); 228.7K èdtan min. MIL-HDBK-217F (25℃)
	DIMANSYON	191 * 63 * 37.5mm (L * W * H)
	Anbalaj	0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
REMAK	1. Tout paramèt ki PA mansyone espesyalman yo mezire nan opinyon 230VAC, aktyèl aktyèl ak 25 ℃ nan tanperati anbyen. 2. De-rating ka bezwen anba D' faible voltages. Tanpri gade nan seksyon "KARATERISTIK ESTATIK" pou plis detay. 3.  Length of setup time is measured at first cold start. Turning ON/OFF the driver may lead to an increase of the setup time. 4. Yo konsidere chofè a kòm yon eleman ki pral opere nan konbinezon ak ekipman final la. Depi enstalasyon konplè a pral afekte pèfòmans EMC, manifaktirè ekipman final yo dwe re-kalifye Directive EMC sou enstalasyon konplè a ankò. (jan disponib sou https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5.  This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃or less. 6. Tanpri gade deklarasyon garanti a sou MEAN WELL la websit nan http://www.meanwell.com 7. Derating tanperati anbyen nan 3.5℃/1000m ak modèl fanless ak nan 5℃/1000m ak modèl fanatik pou opere altitid pi wo pase 2000m (6500ft). 8. Pou nenpòt aplikasyon nòt ak IP dlo prèv enstalasyon fonksyon prekosyon, tanpri al gade manyèl itilizatè nou an anvan ou itilize. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 9. ki baze sou IEC 62386-101/102 DALI pouvwa sou distribisyon ak entèripsyon règleman, tan an tabli bezwen pou fè tès ak yon DALI reskonsab ki ka sipòte DALI pouvwa sou fonksyon, san sa mete sou pye lè va pi wo pase 0.5 segond pou DA tip. ※ Limit responsablite pou pwodwi: Pou enfòmasyon detaye, tanpri al gade https://www.meanwell.com/serviceDisclaimer.aspx

DIMMING OPERASYON

Prensip gradyasyon pou pwodiksyon style PWM
Gradyasyon reyalize pa varye sik la devwa nan pwodiksyon aktyèl la.

3 nan 1 fonksyon gradyasyon (pou Blank-Type)

• Aplike youn nan twa metodoloji ant DIM+ ak DIM-: 0 ~ 10VDC, oswa 10V PWM siyal oswa rezistans.
• Diminye sous kouran ki soti nan ekipman pou pouvwa: 100μA (tip.)

Aplike aditif 0 ~ 10VDC

Aplike siyal aditif 10V PWM (ranje frekans 100Hz ~ 3KHz):

Aplike rezistans aditif:

Nòt:

1. Min. sik devwa nan pwodiksyon aktyèl la se apeprè 0.15%, ak opinyon an gradyasyon se sou 6KΩ oswa 0.6VDC, oswa 10V PWM siyal ak 6% sik devwa.
2. Sik devwa aktyèl pwodiksyon an ta ka desann nan 0% lè gradyasyon opinyon se mwens pase 6KΩ oswa mwens pase 0.6VDC, oswa siyal 10V PWM ak sik devwa mwens pase 6%.

DALI Entèfas (bò prensipal; pou DA/DA2-Type)

• Aplike siyal DALI ant DA + ak DA-.
• Pwotokòl DALI genyen 16 gwoup ak 64 adrès.
• Premye etap la fiks nan 0.2% nan pwodiksyon an

CHAJ SOTI vs TANPERATI

KARAKTERISTIK ESTATIK

FAKTÈ POUVWA (PF).

Tcase nan 80 ℃

TOTAL DISTORSYON AMONIK

(THD)

EFIKASANS vs CHAJ

Seri PWM-120 posede efikasite k ap travay siperyè ki ka rive jwenn jiska 90.5% nan aplikasyon jaden.

48V ki gen konpòtman egzanplè, Tcase nan 80 ℃

TAN LAVI

Blòk Dyagram

Espesifikasyon mekanik

Rekòmande Mounting Direction

Manyèl enstalasyon

Koneksyon pou Blank-type

Atansyon

• Anvan w kòmanse nenpòt travay enstalasyon oswa antretyen, tanpri dekonekte ekipman pou pouvwa a nan sèvis piblik la. Asire w ke li pa ka re-konekte inadvèrtans!
• Keep proper ventilation around the unit and do not stack any objects on it. Also, a 10-15 cm clearance must be kept when the adjacent device is a heat source.
• Mounting orientations other than standard orientation or operating under high ambient temperature may increase the internal component temperature and require a de-rating in output current.
• Kouran yon kab prensipal/segondè apwouve ta dwe pi gran pase oswa egal ak kouran inite a. Tanpri gade espesifikasyon li.
• Pou chofè ki ap dirije ki gen konektè ki enpèmeyab, verifye ke lyen ki genyen ant inite a ak aparèy ekleraj la sere pou dlo pa ka antre nan sistèm nan.
• For dimmable LED drivers, make sure that your dimming controller is capable of driving these units.PWM series requires 0.15mA each unit.
• Tc max. is identified on the product label. Please make sure that the temperature of the Tc point will not exceed the limit.
• PA konekte "DIM- pou -V".
• Apwopriye pou itilize andedan kay la oswa itilize deyò san yo pa ekspoze limyè solèy la dirèk. Tanpri evite plonje nan dlo a pou plis pase 30 minit.
• The power supply is considered a component that will be operated in combination with the final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

FAQ

• K: Kisa mwen ta dwe fè si chofè LED la pa limen?
  A: Tcheke koneksyon pouvwa a epi verifye si vòl latage source is within the specified range.
• K: Èske mwen ka konekte plizyè LED ak yon sèl chofè?
  A: It is recommended to follow the manufacturer’s guidelines on the maximum number of LEDs that can be connected to a single driver to ensure proper functionality and longevity of the LEDs.

Dokiman / Resous

Volim Konstan MEAN-WELL PWM-120-12 Seritage PWM Sòti ki ap dirije chofè [pdfManyèl Pwopriyetè a PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48, Volim Konstan Seri PWM-120-12tagChofè LED Sòti PWM, Seri PWM-120-12, Volim Konstantage PWM Sòti ki ap dirije chofè, Voltage PWM Sòti ki ap dirije chofè, PWM Sòti ki ap dirije chofè, Sòti ki ap dirije chofè, ki ap dirije chofè

Referans

• Manyèl itilizatè