LECTRON VORTEX PLUS Nacs To CCS1 Adapter With Interlock
INTRODUCTION TO THE NACS TO CCS ADAPTER
The Vortex Plus NACS to CCS adapter allows CCS1-enabled electric vehicles to use the North American Charging Standard (NACS) to access NACS DC fast chargers.
AVÈTISMAN
Segondè Voltage – Manyen ak atansyon epi asire bon koneksyon anvan ou itilize.
Caution – Risk of Electric Shock and Fire. Do not use this product if there is any damage to the EV cable, the vehicle connector, or the vehicle inlet.
ENSTRIKSYON SEKIRITE ENPÒTAN
AVÈTISMAN - Lè w ap itilize pwodui elektrik, yo ta dwe toujou swiv prekosyon debaz yo, tankou sa ki annapre yo.
This manual contains important instructions for Model LEADPTeslaCCSBLKUSK that shall be followed during use and maintenance of the adapter.
- a) Li tout enstriksyon yo anvan w sèvi ak pwodui sa a.
- b) Do not put fingers into the adapter.
- c) Do not use this product if the flexible output cable, vehicle connector, vehicle inlet, or the adapter itself has broken insulation, broken, or cracked housings, or if internal parts are accessible, including wiring.
- d) Pa sèvi ak adaptè sa a avèk okenn chajè oswa machin elektrik ki kapab depase vòltaj nominal adaptè a.tage oswa kapasite aktyèl. Gen kèk konbinezon EV ak EVSE ki kapab plizyè voltagoswa dire limite nan surcharge aktyèl ki fèt pou koneksyon EVSE nòmal ak EV. Itilizasyon adaptè a nan sitiyasyon sa yo ka lakòz kondisyon danjere tankou dife, boule, oswa ekspozisyon a gwo vòltaj.tage.
TANPRI LI ENSTRIKSYON AK ATANSYON ANVAN ITILIZE:
- Fèt sèlman pou machin CCS1 ki nan alyans NACS la. Tanpri verifye ak konpayi fabrikasyon machin ou an pou konpatibilite.
- Swiv pwosedi kòrèk koneksyon ak dekoneksyon jan yo preskri nan manyèl itilizatè a.
- Pa dekonekte pandan chaje.
- Pwoteje kont dlo ak imidite.
- Opere nan ranje tanperati a nan -22 ° F a 122 ° F.
- Manyen ak swen epi estoke nan yon kote ki an sekirite.
- Pa netwaye ak detèjan.
- Pa louvri oswa modifye adaptè a.
Kontakte Sipò Kliyan nan contact@ev-lectron.com pou gid itilizasyon, antretyen, oswa reparasyon.
SA KI ENKLI
Pati ki finiVIEW
- CCS1 Connector
- Antre NACS DC
- CCS1 Debloke Latch
- Bouton debloke NACS
ANVAN ITILIZE
NOTE: Ensure the Tesla Supercharger supports CCS1 charging.
WARNING: Do not store the NACS to CCS1 Adapter outside of the storage temperature range of -40°F to 185°F.
TAN CHARGE
Charging time varies depending on the NACS DC fast charging station, electric vehicle specifications, environmental conditions, and battery temperature.
The NACS to CCS Adapter includes built-in temperature monitoring. Charging power will decrease if the internal components of the adapter exceed 194°F. Operation will shut off if the surface temperature of the adapter reaches 140°F.
KONEKTE ADAPTÈ A
To initiate a session through your vehicle’s display or the app, first activate the charging session to unlock the station and then proceed to the steps below.
- Press the NACS unlock button on the underside of the adapter and insert the NACS charger connector until it clicks into place. Ensure the latch is secure.
- Plug the adapter into your vehicle’s CCS1 inlet. Verify that the latch is secure.
- Once securely connected to the vehicle, the adapter’s interlock pin will engage, preventing removal of the charger connector until the session is complete.
- Allow a brief pause for the vehicle and charger to establish communication. Check your vehicle’s display to confirm that charging has started.
DISCONNECTING THE ADAPTER
- When charging is complete, press the CCS latch on top of the adapter and remove it from the vehicle.
- Press the NACS unlock button on the underside of the adapter and disconnect the NACS charger connector.
- Store the adapter in a dry, clean, and secure location to protect it from debris and damage.
DEPANN
Si veyikil la pa kòmanse chaje, tanpri konsidere etap sa yo:
- Asire w ke chajè rapid DC a sipòte machin CCS1 yo.
- Check for firm connections at both the NACS and CCS1 ends of the adapter.
- Debranche san danje apre pwosedi manyèl itilizatè a, epi kòmanse pwosesis koneksyon an ankò.
- Verifye estati chaj la sou chajè rapid NACS DC a ak sou ekran machin elektrik la.
- Si pwoblèm yo pèsiste, tanpri kontakte contact@ev-lectron.com
SPECIFICATIONS
Disclaimer: The Vortex Plus NACS to CCS adapter is exclusively intended for CCS1-enabled electric vehicles using the North American Charging Standard (NACS) to access NACS DC fast chargers.
JWENN PLIS SIPÒ
Bezwen asistans?
For maintenance, servicing, or replacements, please contact our support team by scanning the QR codeor emailing us at contact@ev-lectron.com
KESYON YO POZE SOUVAN
K: Ki kote mwen ka jwenn yon lis constructeur oto ki sèvi ak Tesla Nò Ameriken Charging Standard (NACS)?
A: Tesla provides a list of supported and upcoming automakers at tesla.com/NACS
K: Ki sit Supercharger ki konpatib ak machin mwen an?
A: Add your vehicle details to the Tesla app or use Tesla’s interactive map at tesla.com/NACS to see compatible sites.
K: Kisa mwen ka fè si move tan twò cho lakòz fay nan chaje?
A: Let the charger and adapter cool down for about 30 minutes before retrying. This is a built-in safety feature.
Q: Can I use the Vortex Plus at any Tesla Supercharger?
A: The Vortex Plus is compatible with V3 and V4 Tesla Superchargers. It may not function at older Superchargers unless updated by Tesla. Use the Tesla app or map at tesla.com/NACS to confirm site compatibility.
Q: How many Supercharger ports will be accessible with the Vortex Plus?
A: Over 23,500 Supercharger stalls support NACS. Check the Tesla app or map at tesla.com/NACS for compatible locations
K: Kouman pou mwen aktive yon Tesla Supercharger si ploge-ak-chaj pa travay?
A: Use the Charge Assist app on your vehicle's onboard settings to manually start charging.
Q: What should I do if the Supercharger cord is too short to reach my EV?
A: End-row chargers offer more space. If needed, occupy two spots and charge during off-peak hours when more chargers are available.
Q: Is the Vortex Plus UL certified? Will it be certified by Tesla or OEMs?
A: The Vortex Plus is UL2252 compliant. While we engage with automakers and labs like UL and ETL, Tesla does not currently guarantee third-party adapter compatibility. Contact Tesla for the latest information
Q: Can I use the Vortex Plus in Canada?
A: Yes, you can use the Vortex Plus in the United States and Canada.
Q: What charging output can I expect with the Vortex Plus?
A: Tesla Superchargers deliver DC power directly to the battery via the adapter. The Vortex Plus is rated for 500A and 1,000V.
Q: Does Tesla guarantee compatibility with the Vortex Plus?
A: We actively engage with most OEMs and automakers to ensure the compatibility and reliability of the Vortex Plus. Tesla does not guarantee third-party adapter compatibility. For the latest information, please contact Tesla directly.
Q: What safety features does the Vortex Plus have?
A: The Vortex Plus includes locking mechanisms on both the NACS and CCS sides to prevent accidental disconnection.
Q: Can I use the Vortex Plus with Level 2 Tesla Chargers or Mobile Connectors?
A: No, the Lectron Vortex Plus is a DC adapter designed exclusively for safe use with Superchargers only. To charge your EV at Level 2 Tesla Chargers, we recommend our Tesla to J1772 adapter. This adapter is compatible with Tesla High Powered Wall Connectors, Destination Chargers of all generations, and Mobile Connectors.
K: Èske m ap kapab sèvi ak ploge Vortex la pou jwenn aksè nan nivo 2 chaje nan Chargers Destination Tesla oswa konektè mobil?
A: No, the Vortex Plus is designed for Superchargers only. For Level 1 or Level 2 charging, use the Lectron Tesla to J1772 adapter, compatible with Tesla Wall Connectors, Destination Chargers, and Mobile Connectors
Dokiman / Resous
 |
LECTRON VORTEX PLUS Nacs To CCS1 Adapter With Interlock [pdfManyèl Itilizatè VORTEX PLUS, VORTEX PLUS Nacs To CCS1 Adapter With Interlock, Nacs To CCS1 Adapter With Interlock, CCS1 Adapter With Interlock, Adapter With Interlock |