Imou PS8E Security Camera

Espesifikasyon
- Power Input: PoE or 12 VDC 1 A
- LED Status: Green, Red, Green & Red Alternating, Off
- Konsomasyon pouvwa: 4A
- Reset: 5-second press
Enstriksyon Itilizasyon Pwodwi
1. Pouvwa sou Kamera a
Connect the camera to a PoE device such as a switch or NVR with an Ethernet cable to transmit both power and data. If the camera is connected to a non-PoE device, use a separate power adapter (not provided) to plug the camera in (see part 1).
2. Jwenn Aplikasyon Imou Life
Eskane kòd QR nan pati 2 a oswa chèche "Imou Life" pou telechaje epi enstale aplikasyon an. Kreye yon kont epi konekte.
3. Mete kanpe kamera a
Eskane kòd QR ki sou kò aparèy la oubyen sou kouvèti gid sa a avèk aplikasyon an, epi swiv enstriksyon ki sou ekran an pou konplete konfigirasyon an (gade pati 3).
4. Enstale Kamera a
Make sure the mounting surface is strong enough to hold three times the weight of the camera. For the detailed installation process, please see.
pati 4
Si ou bezwen reset kamera a, peze epi kenbe bouton reset la pou 5 s. Dirije a vin wouj solid lè kamera a ap demaraj.
Ki sa ki bwat la



insullarion






kontakte
- sèvis.global@imou.com
- https://www.imou.com
- @ imouglobal
FAQ
K: Kouman pou mwen reset kamera a?
A: Press and hold the reset button for 5 seconds. The LED will turn solid red during boot-up.
K: Ki sa diferan estati ki ap dirije yo endike?
A: Green - Ethernet cable not plugged in, Red - Device malfunction, Green & Red Alternating - Firmware updating, Off - Power off.
Dokiman / Resous
![]() |
Imou PS8E Security Camera [pdfGid Itilizatè PS8E, PS8E Security Camera, Security Camera, Camera |

