Foshan D040263 Remote Controller
Espesifikasyon
- Pwodwi: Remote Controller
- Manufacturer: Foshan Alpicool Holding Group Co., Ltd.
- Address: No.3, ZhenZhu Road, Yang’e, Lunjiao, Shunde, Foshan, Guangdong, China
- Battery Requirement: Two AAA batteries (not included)
Enstriksyon Itilizasyon Pwodwi
- Insert two AAA batteries into the remote control following the correct polarity.
- Avoid pulling forcefully on the battery slots to prevent damage.
- Do not make any changes or modifications to the unit that are not approved by the manufacturer as it may void the user’s authority to operate the equipment.
- Ensure the remote control complies with Part 15 of the FCC Rules to prevent harmful interference and undesired operation.
Enstriksyon netwayaj
Regularly clean the remote control to prevent dust accumulation, cracking, and odor. Follow these steps:
- Sèvi ak yon twal mou epi sèk pou siye sifas kontwòl remote la.
- Evite itilize pwodwi chimik piman bouk oswa materyèl abrazif ki ka domaje aparèy la.
- Keep the remote control in a dry and clean environment when not in use.
Remote Controller
Manifakti:
- Foshan Alpicool Holding Group Co., Ltd.
- No.3, ZhenZhu Road, Yang’e, Lunjiao , Shunde, Foshan, Guangdong, China
OPERASYON KONTWÒL REMOTE
- TANPERATI MOUTE
- VITÈS VANTILATÈ
- TANPERATI BASYON
- AUTOMATIC DRAINAGE
- MÒD DÒM
- SWITCH MODE BUTTON
- TAN
- ON/OFF
Nòt: Please pair the remote control with the air conditioner before operating.
- Pairing the remote control with the air conditioner: Within 10 seconds of powering on the air conditioner, long press the power button 8 for three seconds, the buzzer will make a long beep, pairing finished.
- Air conditioner ON/OFF: press the ON/OFF button 8 to switch ON/OFF.
- Timing: under the running state, press 7 to timing, then press 1 or 3 to adjust the specified time, press 7 again to complete the timing. After 10s, the display changes to temperature. Press 7 to cancel the timing. (*The time interval ranges from 1 to 24 hours)
- Mode conversion: press 6 to switch between 3 modes: cool, dry and fan. Short press the sleep mode button 5 to activate sleep mode.
- Temperature Setting: under the cool and sleep mode, press 1 to increase the temperature, and press 3 to decrease the temperature. (* under the fan and dry mode, the temperature cannot be adjusted.)
- Fan Speed Setting: press 2 to switch between 3 modes: H/M/L.
- Automatic Drainage Function: press 4 to switch ON/OFF the drainage function.
- Telekòmand sa a bezwen de pil AAA (pa enkli).
- Enstalasyon batri ak ranplasman
Removing Old Batteries- Jwenn lòj batri a:
On the back of the remote, find the “OPEN” or “⇨” symbol, then slide/press the cover in the direction of the arrow. - Louvri kouvèti a:
Gently push or pry open the battery cover until it is fully released. - Remove the Batteries:
Use your fingers or a non-metallic tool (e.g., a toothpick) to push the old batteries out of the slots. Avoid pulling forcefully.
- Jwenn lòj batri a:
Enstale nouvo pil
- Check Battery Type: Use 2 AAA batteries (**Note: Do not mix old and new batteries**).
- Align Polarity: Insert the batteries according to the “+/-” markings inside the compartment (usually positive side up).
- Secure the Batteries: Press down gently to ensure they are fully seated and making proper contact.
- Close the Cover: Align the cover with the locking tabs and press firmly until it clicks into place.
Pil ki pa rechargeable yo pa dwe rechaje
- Diferan kalite pil oswa pil nouvo ak itilize yo pa dwe melanje
- Batri yo dwe mete ak polarite ki kòrèk la
- Yo dwe retire pil ki fin itilize nan aparèy la epi jete yo san danje
- Si yo dwe estoke aparèy la san itilize pou yon peryòd tan, pil yo ta dwe retire
- Tèminal ekipman pou yo pa dwe kout-sirkwit.
Avètisman: Chanjman oswa modifikasyon nan inite sa a ki pa ekspreseman apwouve pa pati ki responsab pou konfòmite a ka anile otorite itilizatè a pou opere ekipman an.
Nòt: Yo te teste ekipman sa a epi yo jwenn li konfòme yo ak limit pou yon aparèy dijital Klas B, dapre pati 15 Règ FCC yo. Limit sa yo fèt pou bay pwoteksyon rezonab kont entèferans danjere nan yon enstalasyon rezidansyèl. Ekipman sa a jenere, itilize ak ka gaye enèji frekans radyo epi, si li pa enstale ak itilize an akò ak enstriksyon yo, ka lakòz entèferans danjere nan kominikasyon radyo. Sepandan, pa gen okenn garanti ke entèferans pa pral rive nan yon enstalasyon an patikilye. Si ekipman sa a lakòz entèferans danjere nan resepsyon radyo oswa televizyon, sa ki ka detèmine pa fèmen ekipman an epi limen, itilizatè a ankouraje pou eseye korije entèferans lan pa youn oswa plis nan mezi sa yo:
- Reoryantasyon oswa deplase antèn k ap resevwa a.
- Ogmante separasyon ki genyen ant ekipman ak reseptè a.
- Konekte ekipman an nan yon priz sou yon sikwi diferan de sa ki reseptè a konekte.
- Konsilte konsesyonè a oswa yon teknisyen radyo/televizyon ki gen eksperyans pou èd.
Aparèy sa a konfòm ak Pati 15 Règ FCC yo. Operasyon an sijè a de kondisyon sa yo:
- Aparèy sa a pa ka lakòz entèferans danjere, ak
- Aparèy sa a dwe aksepte nenpòt entèferans resevwa, enkli entèferans ki ka lakòz operasyon endezirab.
SMART CONTROL -AIR CONDITIONER INSTRUCTIONS
- Premye etap: Turn on the Bluetooth on your smart device; start the APP and click “Search” to find nearby air conditioners. A location authorization pop-up will appear. Click “Authorize” to grant permission.
- Dezyèm etap: Click air conditioner icon for Bluetooth pairing (the APP will prompt you to pair the air conditioner by pressing the
mode button on the air conditioner’s control panel when connecting the air conditioner for the first time). After pairing, the APP will switch to the main interface, allowing you to control the air conditioner.
- SET (Celsius and Fahrenheit conversion can be adjusted in the SET)
- Kontwòl tanperati
- Current temperature (Ambient temperature)
- Mode•. COOL/DRY/SLEEP/FAN
- Autodraining ON/OFF
- Back button (Tap to disconnect Bluetooth and return to the search page)
- ON/OFF
- Fault Indicator (Displays only when errors occur)
- Round temperature vector
- (Displays target temperature)
- Tanperati sib
- Fan speed: Low/Medium/High
- Distribisyon
Image for reference only, please refer to the actual display page.
Downloading the “Portable air conditioner” Application
Scan the QR code on the left or search for the “Portable air conditioner” APP in the APP Store (for Apple devices) or Google Play (for Android devices).
Anviwònman vitès fanatik: press 2 to switch between 3 modes: H/M/L.
Automatic Drainage Function: press 4 to switch ON/OFF the drainage function.
SWEN AK ENTRETYEN
Netwayaj:
- Wipe the air conditioner with warm and wet cloth.
- If it is too dirty, wipe it with neutral detergent, and then dry the water stain with dishcloth.
Antretyen pati plastik:
- To properly protect the air conditioner, it must always be kept clean, and try to avoid oil stain and deformation when using.
- If the oil is attached to the plastic parts for a long time, the plastic is prone to aging or cracking, and gives off odor. Therefore, we should form the habit of regular cleaning.
AVÈTISMAN!
- It is strictly forbidden to clean the air conditioner in the water directly, so as to prevent the electrical insulation from reducing and rusting.
- The following things will damage the coating, plastic parts and cannot be used for cleaning: alkaline detergent, soap, grinding powder, hot water, brush, Tiana water, gasoline, alcohol.
FAQ
K: Kisa mwen ta dwe fè si kontwòl remote la pa travay?
A: Check the battery compartment to ensure the batteries are inserted correctly and have enough power. If the issue persists, contact customer support for further assistance.
Q: How far is the remote control's range?
A: The range of the remote control may vary depending on environmental factors, but it is typically effective within a reasonable distance from the controlled device.
Dokiman / Resous
 |
Foshan D040263 Remote Controller [pdfManyèl Itilizatè D040263, 2A9O8-D040263, 2A9O8D040263, D040263 Remote Controller, D040263, Remote Controller, Controller |