Aplikasyon EVshield

Enfòmasyon sou pwodwi

Espesifikasyon:

• Opere Voltage: ~230V AC
• Maksimòm aktyèl: 80A
• Koneksyon: 2.4GHz Wi-Fi
• Karakteristik: Plis pase/Anba VoltagPwoteksyon e, Pwoteksyon Siperyè/Anba Kouran, Pwoteksyon Reta, Chanjman Minutè, Volimtage/Current Imbalance Protection, Phase Sequence Protection, Bidirectional Energy Monitor
• Ekspozisyon: White and Red Backlight

Enstriksyon Itilizasyon Pwodwi

Enstalasyon:

Ensure the device is installed by a certified installer following local safety guidelines. Connect the device according to terminal markings to avoid malfunctions or safety hazards.

Konekte ak Wi-Fi:

1. Limen aparèy la epi tann endikasyon LED Wi-Fi a.
2. Flash rapid: Ready to Connect.
3. Ralanti Flash: Wi-Fi OFFLINE.
4. LED ON: Konekte ak Wi-Fi.
5. Pou re-inisyalize Wi-Fi a, peze epi kenbe bouton re-inisyalizasyon an.

Sèvi ak APP a:

1. Telechaje yon aplikasyon ki baze sou TUYA nan magazen APP la.
2. Kreye yon kont oswa itilize APP a kòm yon envite.
3. Add a new device by pressing the symbol in the top right-hand corner.
4. Ensure the device is connected to power and your phone is on a local 2.4GHz Wi-Fi network.

Montre Anviwònman:

The display shows different colors for different statuses: White – Normal, Red – Fault detected, Backlight OFF after 180 seconds.

Kondisyon Itilizasyon:

• Voltage: ~230V AC
• Amps: Max. 80A

Limit responsabilite nou

Aplikasyon EVshield la
This guide is to be used as a reference only. EVshield does not provide advice, instructions or recommendations regarding the electrical installation and cannot be held liable for incorrect installation of the EVshield SMART-pack and associated components. Always follow the instructions of the charger manufacturer and have the installation carried out by a certified installer according to local safety guidelines.

Konekte ak APP

Telechaje nenpòt APP ki baze sou TUYA nan magazen APP a. Pou egzanpample, sèvi ak youn nan TUYA APP ofisyèl yo ki nan lis anba a:

1. Kreye yon kont oswa itilize APP a kòm yon envite.
2. In the top right-hand corner. Press the symbol to add anew device.
3. Make sure the device is connected to mains power
4. Make sure the phone is connected to a local 2.4GHz Wi-Fi network

Anviwònman Wi-Fi 2.4GHz

Endikasyon LED Wi-Fi

• Flash rapid: Pare pou konekte
• Ralanti Flash: Wi-Fi OFFLINE
• LED ON: Wi-Fi Konekte

Reyajiste Fonksyon

• Reset Wi-Fi : Peze epi kenbe
• Reset Consumption: Go to Display “EPS” Peze & Kenbe
• Reset faktori: Go to Display “Hz Frequency” Peze & Kenbe

Sipò

Konekte ak APP

Installation Wiring and Dimensions

Correct Wiring Required
The Device must be installed in accordance with the terminal markings. Incorrect wiring may result in malfunction or safety hazards.

Kondisyon Itilizasyon

• Voltage ~230V kouran altènatif
• Amps : Max. 80A
• Tanperati : -20°C ~ 60°C
• Imidite : <85%
• Altitid : <2000m
• Fil elektrik: Maksimòm 35mm2
• Montaj: 35mm DIN-rails

Sekirite epi Enstriksyon Enstalasyon

No Isolation Function
This device does not provide an isolation function.
Always disconnect mains power before servicing or repairing the device.

Neutral Line Connection
The neutral (N) line is internally connected and does not include a disconnection mechanism.
Ensure appropriate external disconnection measures are in place.

Supplementary Protection Only
This product offers limited current protection and is not a substitute for a standard circuit breaker.
For proper short-circuit protection, install appropriate breakers at the upstream side of this device.

Fonksyon souview

• Plis pase Voltage Pwoteksyon
• Anba Voltage Pwoteksyon
• Pwoteksyon Surkouran
• Anba Pwoteksyon Kouran
• Pwoteksyon reta
• Bouton revèy
• VoltagPwoteksyon Dezekilib
• Pwoteksyon dezekilib aktyèl la
• ShortagPwoteksyon Faz e
• Pwoteksyon Sekans Faz
• Monitè Enèji Bidireksyonèl
• Transmetè Wi-Fi 2.4GHz
• Aplikasyon aktive

Anviwònman ekspozisyon

• Blan: Nòmal
• Wouj: Fòt detekte
• Ekleraj: OFF apre 180 segonn

Kesyon yo poze souvan (FAQ)

• K: Èske mwen ka enstale EVshield SMART-pack la mwen menm?
  • A: We recommend having the installation carried out by a certified installer to ensure safety and proper functioning.
• K: Kouman pou mwen reset koneksyon an Wi-Fi?
  • A: Press and hold the reset button to reset the Wi-Fi connection on the device.
• K: Kisa mwen ta dwe fè si LED Wi-Fi a endike "Wi-Fi OFFLINE"?
  • A: Check your Wi-Fi network connection and ensure it is a local 2.4GHz network for proper functioning.

Dokiman / Resous

Aplikasyon EVshield EVshield [pdfGid Itilizatè Aplikasyon EVshield, Aplikasyon

Referans

• Manyèl itilizatè