UK-based manufacturer specializing in electric heating solutions, including plenum heaters, fan heaters, and wireless control systems.
Pwodwi Ekipman Consort limite is a prominent UK manufacturer known for its comprehensive range of electric heating products. From commercial recessed ceiling heaters and downflow fan heaters to advanced wireless controllers and frost protection units, Consort designs solutions for both domestic and commercial environments. Their products focus on energy efficiency, safety, and ease of installation, often featuring sophisticated control options like open window detection and wireless pairing.
Dènye manyèl yo soti nan manuals+ òganize pou mak sa a.
Kesyon komen sou manyèl, anrejistreman, ak sipò pou mak sa a.
Turn the power to the heater OFF and then ON again. Within 20 seconds, press and hold the pairing buttons (commonly 'MENU/MODE' and '+') on the specific controller until the display shows 'PAIR'. The heater typically confirms pairing with a status light.
Error codes like Err 2, Err 3, or Err 9 usually indicate sensor faults or overheating. To reset an overheat fault, ensure the heater is in standby, then press and hold all control buttons until 'test' appears. If the error persists, contact technical support.
This energy-saving feature detects sudden drops in temperature (e.g., 2°C in less than 10 minutes) and automatically switches the heater off. It resumes operation when a temperature rise is detected or after a set time.
You can contact Consort Equipment Products Limited at +44 (0)1646 692172 or via email at technical@consortepl.com.