BSEED W-SD Multi Function Power Meter Instruction Manual

BSEED W-SD Multi Function Power Meter

fonksyon kle

Entwodiksyon pwodwi

The multi – functional Wlfl guide rail meter adopts a rail – type design, which is small in size, compact instructure and simple in installation; it uses an LCD display screen to display current, voltage, electricity, power,frequency and other electrical parameters, is convenient for users to acquire data and easy to operate. It hasgood anti – electromagnetic interference capabilities, meets various needs of power management, facilitates therealizationof terminal – intelligent power metering, and facilitates the retrofitting of power meters in the lateltransformation  of the lighting system. It is widely used in commercial squares, science and technology parksuniversities and other occasions where billing is required, It can also be jointly deployed with energyconsumption monitoring and energy management systems. its application scope includes property bilingmanagement, electricity metering, power demand – side management, energy management andenergy-saving analysis, Other low – voltage power systems, etc.

Paramèt teknik

Function Introduction, Default Settings

structural analysis

DIMANSYON

Gwosè pwodwi

Dyagram fil elektrik

Set function operation

Press the set key for 5 seconds to enter the settings page, give an example of the “Overvoltage Protection” setting, click thekey cursor to move to the “Overvoltage Protection” position, press the set key to select, press thekey to adjust to the required value, press the set to save after the adjustment is completed, and press the key to select other settings. If you do not need to set it, press thekey to move the cursor to the exit position, and then press set to return to the home page. The other settings can be the same as the “Overvoltage Protection” setting method.

Set function operation

Download Smart lavi APP or Graffiti APP Smart Connection
WIFI connection or reset operation method: Long press the wifi key 5-10s wifi indicator light will flash, turn on the phone Bluetooth, then open the Smart Life APP, click “+” in the upper right corner, select “Add Device”, wait for the device to scan out the device, click on the device to select the wifi name, enter the password to wait for the device to be added successfully.

PLIS ENFÒMASYON