1. Entwodiksyon

Thank you for choosing the KAIWEETS KC200D Digital Clamp Meter. This device is a compact, high-precision instrument designed for electrical measurements in various settings, including home, commercial, and industrial environments. It features True RMS technology for accurate readings of complex waveforms, Non-Contact Voltage (NCV) detection for enhanced safety, and a clear backlit LCD for easy readability. This manual provides essential information for safe and effective use of your clamp mèt.

2. Enfòmasyon sou Sekirite

To ensure safe operation, please read and understand all safety warnings and operating instructions before using this instrument. Failure to observe these warnings can result in serious injury or death.

• Toujou respekte kòd sekirite lokal ak nasyonal yo.
• Pa sèvi ak mèt la si li sanble domaje oswa si izolasyon sou fil tès yo konpwomèt.
• Pa aplike plis pase rated voltage, as marked on the meter, between terminals or between any terminal and ground. The maximum operating voltage se 600V.
• Pran anpil prekosyon lè w ap travay ak voltagpi wo pase 60V DC oswa 30V AC RMS. Volim sa yotages poze yon danje chòk.
• Keep your fingers behind the finger guards on the test leads during use.
• Pa sèvi ak mèt la nan anviwònman ki gen gaz, vapè, oswa pousyè ki ka eksploze.
• Retire fil tès yo nan sikwi a anvan ou chanje fonksyon yo.
• Always turn off the power to the circuit under test before connecting or disconnecting the test leads.
• Ensure the battery cover is securely closed before operating the meter.

3. Pake kontni

Verify that all items listed below are present and undamaged:

• 1 x KAIWEETS KC200D Digital Clamp Mèt
• 1 x manyèl itilizatè
• 1 x depo sak
• 2 x Test Leads (Red and Black)
• 2 x AAA 1.5V pil

4. Pwodwi souview

The KAIWEETS KC200D is designed for ease of use and durability. Familiarize yourself with the main components:

Figi 4.1: KAIWEETS KC200D Clamp Meter with its various measurement functions highlighted, including AC/DC Current, AC/DC Voltage, Resistance, Capacitance, Frequency, Diode Test, Continuity, and NCV.

4.1 Konpozan kle

• Clamp Machwa: Itilize pou mezire kouran AC/DC san kontak.
• Fonksyon Dial: Rotary switch to select measurement modes.
• Ekspozisyon LCD: Montre lekti mezi, inite, ak endikatè.
• Bouton: For special functions like Data Hold, MAX/MIN, DC Zero, Backlight, and NCV.
• Antre Tèminal: Pou konekte fil tès pou volimtage, resistance, capacitance, frequency, diode, and continuity measurements.

5. Enstalasyon

5.1 Enstalasyon batri

The KC200D requires two AAA 1.5V batteries (included).

1. Asire w ke mèt la etenn.
2. Jwenn konpatiman pil la sou dèyè mèt la.
3. Sèvi ak yon tournevis pou ouvri kouvèti konpatiman batri a.
4. Insert the two AAA batteries, observing the correct polarity (+ and -).
5. Ranplase kouvèti lòj batri a epi an sekirite li ak vis la.

5.2 Konekte fil tès yo

Pou mezi ki mande fil tès (voltage, resistance, capacitance, frequency, diode, continuity):

• Insert the red test lead into the "INPUT" terminal.
• Insert the black test lead into the "COM" (Common) terminal.

6. Operasyon Enstriksyon

Always select the appropriate function before making any measurement. Turn the function dial to the desired measurement mode.

6.1 Mezi Kouran AC/DC (Clamp)

Sèvi ak clamp jaw for non-contact current measurement. This method is ideal for safely measuring current without breaking the circuit.

Figi 6.1: Cl laamp jaw of the KC200D measuring current on a single electrical wire, demonstrating its compact design and precision.

1. Vire kadran fonksyon an sou 20A ~ or 200A ~ position for AC current, or 20A= or 200A= for DC current.
2. Peze cl laamp deklanche pou louvri machwè a.
3. Encircle only youn conductor with the clamp jaw. Do not clamp around multiple wires, as this will result in an inaccurate reading.
4. For DC current measurement, press the Z/F button to zero the display before clamping.
5. Li valè aktyèl la sou ekspozisyon LCD a.

6.2 AC/DC Voltage Mezi

Pou mezire voltage, use the test leads.

1. Vire kadran fonksyon an sou V~ (Volim AC)tage) oswa V= (DC Voltage) pozisyon.
2. Connect the red test lead to the positive side of the circuit and the black test lead to the negative side (or ground).
3. Li voltage valè sou ekspozisyon LCD a.

6.3 Mezi rezistans

Asire w sikwi a pa gen enèji anvan ou mezire rezistans lan.

1. Vire kadran fonksyon an sou Ω pozisyon.
2. Konekte fil tès yo atravè konpozan ou vle mezire a.
3. Li valè rezistans lan sou ekran LCD a.

6.4 Mezi Kapasite

Discharge capacitors completely before measurement to avoid damage to the meter or injury.

1. Vire kadran fonksyon an sou Kapasite position (often shared with Diode/Continuity, press FUNC to cycle).
2. Konekte fil tès yo atravè kondansateur a.
3. Li valè kapasite a sou ekspozisyon LCD a.

6.5 Mezi frekans

Pou mezire frekans:

1. Vire kadran fonksyon an sou Hz% pozisyon.
2. Connect the test leads across the circuit where frequency is to be measured.
3. Li valè frekans lan sou ekspozisyon LCD a.

6.6 Tès Dyòd

Asire w ke dyòd la dekonekte nan sikwi a.

1. Vire kadran fonksyon an sou Dyòd position (often shared with Capacitance/Continuity, press FUNC to cycle).
2. Connect the red test lead to the anode and the black test lead to the cathode.
3. A forward voltage drop will be displayed for a good diode. Reverse the leads; the display should show OL (Open Loop).

6.7 Tès kontinwite

Asire w ke sikwi a pa gen enèji.

1. Vire kadran fonksyon an sou Kontinwite position (often shared with Diode/Capacitance, press FUNC to cycle).
2. Konekte fil tès yo atravè konpozan an oswa fil la.
3. If there is continuity (low resistance), the meter will emit an audible beep.

6.8 Voltage (NCV) Deteksyon

The NCV function allows for quick and safe detection of live AC voltage san kontak dirèk.

Figi 6.2: The KC200D performing Non-Contact Voltage (NCV) detection near an electrical outlet, showing visual indicators for low and high voltage prezans.

1. Vire kadran fonksyon an sou NCV pozisyon.
2. Bring the top end of the meter near the conductor or outlet.
3. The meter will emit an audible beep and illuminate LED indicators, with frequency increasing as voltage strength increases.

6.9 Fonksyon espesyal

Figi 6.3: The KC200D highlighting its user-friendly functions: MAX for peak value, Z/F for DC current zeroing, H for data hold, backlight for low-light conditions, and auto-off for battery saving.

• Data Hold (H/* button): Peze pou bloke lekti aktyèl la sou ekran an. Peze ankò pou lage li.
• MAX/MIN (MAX button): Press to display the maximum or minimum measured value. Press again to cycle.
• DC Current Zero (Z/F button): For DC current measurements, press this button before clamping to zero out any residual readings.
• Backlight (H/* long press): Long press the H/* button to turn the display backlight ON or OFF for improved visibility in low-light conditions.
• Otomatik: The meter automatically powers off after approximately 15 minutes of inactivity to conserve battery life. Press any button or rotate the function dial to wake it up.

7. Antretyen

7.1 Netwayaj

Siye mèt la avèk yon twal sèk epi mou. Pa sèvi ak pwodui abrazif oswa solvang.

7.2 Ranplasman batri

When the battery indicator appears on the LCD, replace the batteries as described in the Setup section (5.1 Battery Installation).

7.3 Depo

If the meter is not used for an extended period, remove the batteries to prevent leakage and damage. Store the meter in its carrying bag in a cool, dry place.

NAN. Depanaj

9. Espesifikasyon

Technical specifications for the KAIWEETS KC200D Digital Clamp Mèt:

10. Garanti ak sipò

KAIWEETS products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the KAIWEETS official website or contact your local distributor. Please retain your purchase receipt as proof of purchase for warranty claims.