OOYCYOO 80 Amp Manyèl itilizatè MPPT Solè Charge Controller

1. Entwodiksyon

This manual provides essential information for the safe and efficient operation of your OOYCYOO 80 Amp MPPT Solar Charge Controller. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your solar power system. This controller is designed to maximize power harvest from your solar panels and efficiently charge various battery types in 12V, 24V, 36V, and 48V systems.

2. Enfòmasyon sou Sekirite

Toujou obsève prekosyon sekirite sa yo pandan enstalasyon ak operasyon:

• Ensure all connections are secure and correct polarity is maintained to prevent damage to the controller, batteries, or solar panels.
• Install appropriate circuit breakers for each line (solar array, battery, load) to protect against overcurrent.
• Avoid short-circuiting terminals.
• Do not attempt to disassemble or repair the controller yourself. Refer to qualified personnel.
• Enstale kontwolè a nan yon zòn ki byen ayere, lwen materyèl ki ka pran dife ak limyè solèy dirèk.
• Mete ekipman pwoteksyon pèsonèl (PPE) ki apwopriye pandan enstalasyon an.

3. Pwodwi Features

• Efficient 80A MPPT Technology: Konpatib ak sistèm 12V/24V/36V/48V voltages, featuring Maximum Power Point Tracking (MPPT) technology with tracking efficiencies up to 99% and peak conversion efficiencies up to 98%.
• Konpatibilite pil laj: Supports various 12/24/36/48V battery types, including Lead-acid (Sealed, Gel, AGM, Flooded) and Lithium batteries.
• Pwoteksyon konplè: Built-in PV array short-circuit protection, PV input over-current protection, load short-circuit protection, PV polarity reversal protection, battery polarity reversal protection, over-temperature protection, Lithium battery low temperature protection, night reverse charging, battery over voltage, and load overload.
• Segondè Voltage/Power Support: Accepts solar voltage up to 150V. Max input power: 1000W (12V system), 2000W (24V system), 3000W (36V system), 4000W (48V system).
• Dual Cooling System: Constructed with die-cast aluminum for excellent heat dissipation and reduced power consumption. Features an upgraded turbofan fan for efficient cooling (activates at >45°C, turns off <40°C).
• Ekspozisyon LCD: Provides real-time energy statistics and operating data for easy monitoring.

4. Pake kontni

Pake a anjeneral gen ladan:

• OOYCYOO 80 Amp MPPT Solè Charge Controller
• Materyèl pou monte (vis, lank miray)
• Kab capteur tanperati
• Manyèl itilizatè

Image: OOYCYOO 80 Amp MPPT Solar Charge Controller with included mounting hardware, temperature sensor, and manual.

5. Enstalasyon ak Enstalasyon

Swiv etap sa yo pou enstalasyon apwopriye:

1. Monte kontwolè a:

   Mount the controller vertically on a wall or sturdy surface in a well-ventilated area, ensuring ample space for heat dissipation. Use the provided screws and wall anchors. Ensure controllers are at the same horizontal level with ample space for heat dissipation between devices if installing multiple units.

   

   Video: Demonstrates mounting the controller on a wall using screws.

2. Sekans fil elektrik:

   Always connect in the following order: Battery > Solar Array > Load. Disconnect in the reverse order.

   • Konekte batri a: Connect the battery positive and negative terminals to the controller's battery terminals. Ensure correct polarity.
   • Connect the Solar Array: Connect the solar panel positive and negative terminals to the controller's solar array terminals. Ensure correct polarity.
   • Konekte chaj la: Connect your DC load to the controller's load terminals.
   

   Image: A diagram illustrating the correct wiring sequence for the solar charge controller, connecting solar panels, battery, and load.

   Video: Demonstrates the wiring process for the MPPT solar charge controller, connecting to a battery and a load.

3. Konekte Capteur Tanperati a: Plug the temperature sensor cable into the designated port on the controller. This ensures accurate temperature compensation for battery charging.
4. Atè: Properly ground the controller to prevent electrical hazards.
5. Parallel Installation (Optional): If installing multiple controllers in parallel, connect them using the parallel communication cable.

   Video: Guide on assembling and connecting the parallel communication cable for multiple MPPT controllers.

6. Operasyon Enstriksyon

6.1. Ekspozisyon LCD aview

The LCD display provides real-time information about your solar system. Use the buttons below the screen to navigate through different parameters.

Imaj: Detaye view of the MPPT Solar Charge Controller's LCD display and various connection ports, including Solar Panel, Battery, Load, USB, Remote Temp Sensor, and RS485 Communication Port.

6.2. Battery Type Selection

The controller supports automatic recognition of system voltage (12V/24V/36V/48V). You can manually select the battery type (Lead-acid, Gel, AGM, Flooded, Lithium) through the LCD interface to optimize charging parameters.

Image: Illustrates the controller's compatibility with various battery types (GEL, AGM, USER, SEL, FLD, LI, LiFePO4) and a typical three-stage charging curve (Bulk Charge, Constant Charging, Float Charge).

6.3. Operasyon Paralèl

When operating multiple controllers in parallel, ensure the main controller is configured first. Slave controllers will automatically synchronize their configurations with the main controller.

7. Antretyen

• Regularly inspect all wiring connections for tightness and corrosion.
• Keep the controller's cooling fins and fan vents clear of dust and debris to ensure efficient heat dissipation.
• Check the LCD display periodically for any error codes or unusual readings.
• Ensure the battery terminals are clean and free of oxidation.

NAN. Depanaj

8.1. Pwoblèm komen ak solisyon yo

• Pa gen ekspozisyon/Pa gen kouran: Check battery connections and ensure the battery circuit breaker is closed. Verify battery voltage se nan seri a fonksyone.
• Batri pa chaje: Check solar panel connections and ensure they are receiving sufficient sunlight. Verify solar panel voltage is within the controller's input range. Confirm correct battery type selection.
• Segondè Voltage Avètisman: This may occur if the solar array's open circuit voltage (Voc) exceeds the controller's maximum input voltage (150V). Reconfigure your solar array to stay within limits.
• Battery Management System (BMS) Shutdown: If your lithium battery's BMS has shut down due to low voltage, it may need activation.

Video: Provides methods to reactivate a 12V or 24V lithium battery if its Battery Management System (BMS) has shut down.

9. Espesifikasyon

10. Garanti ak sipò

For warranty information, technical support, or service inquiries, please contact OOYCYOO customer service directly. Refer to the product packaging or the official OOYCYOO websit pou detay kontak.