EPOMAKER Split70 Wireless Ergonomic Keyboard Instruction Manual

1. Entwodiksyon

The EPOMAKER Split70 is a 70% layout wireless ergonomic mechanical keyboard designed for comfort and customization. It features a unique split design, a programmable rotary knob, and tri-mode connectivity (Bluetooth 5.0, 2.4GHz wireless, and USB-C wired). This keyboard supports QMK/VIA for extensive key remapping and macro creation, and includes hot-swappable switches for personalized typing experiences. The gasket-mounted structure with five layers of padding ensures a quiet and satisfying acoustic profile, complemented by vibrant RGB backlighting.

2. Pake kontni

Tanpri verifye ke tout atik yo prezan nan pakè ou a:

• EPOMAKER Split70 Keyboard (Left and Right Halves)
• Kab USB-C pou USB-A (pou koneksyon filaire ak chaje)
• USB-C to USB-C Interconnect Cable (for connecting keyboard halves)
• 2.4GHz Wireless Receiver (stored in the keyboard)
• Keycap Puller
• Chanje Puller
• Chanjman Siplemantè
• Mac Modifier Keycaps
• Manyèl itilizatè

3. Enstalasyon

3.1 Connecting the Keyboard Halves

The two halves of the Split70 keyboard connect via a short USB-C to USB-C interconnect cable. Plug one end into the USB-C port on the left half and the other end into the corresponding port on the right half. The halves can also be magnetically attached for a unified layout.

3.2 Koneksyon branche

1. Ensure the keyboard halves are connected using the interconnect cable.
2. Toggle the connectivity switch on the left keyboard half to the USB position.
3. Plug the provided USB-C to USB-A cable into the USB-C port on the left keyboard half and the USB-A end into your computer.
4. The keyboard backlight will illuminate, indicating a successful wired connection.

3.3 Koneksyon san fil 2.4GHz

1. Ensure the keyboard halves are connected.
2. Toggle the connectivity switch on the left keyboard half to the 2.4G position.
3. Insert the 2.4G wireless receiver (dongle) into an available USB port on your computer.
4. The 'R' key indicator will flash until a connection is established, then it will stop flashing and return to the current backlight effect.

3.4 Bluetooth Koneksyon

The Split70 supports up to three Bluetooth devices.

1. Ensure the keyboard halves are connected.
2. Toggle the connectivity switch on the left keyboard half to the BT position.
3. Kenbe desann FN + Q/W/E until the light indicator flashes quickly. This prepares the keyboard for pairing with Bluetooth device 1 (Q), 2 (W), or 3 (E).
4. On your device (PC, Mac, Android Tablet), open Bluetooth settings and search for "Split70-1", "Split70-2", or "Split70-3" and connect.
5. Once connected, the light indicator will stop flashing and return to the current backlight effect.
6. To switch between paired Bluetooth devices, short press FN + Q/W/E.

4. Operasyon Enstriksyon

4.1 Fonksyon debaz

The Split70 keyboard features a programmable rotary knob and dedicated function keys for enhanced control.

• Bouton Rotary: The knob on the left keyboard half can be rotated to adjust volume or other multimedia settings, and pressed to mute/unmute. Its function can be customized via VIA software.
• FN + Retounen: Reset the keyboard to factory settings.
• FN + A: Switch to Windows OS layout.
• FN + S: Switch to Mac OS layout (Mac modifier keycaps are included for replacement).
• FN + Win (Windows only): Kle fèmen/debloke Windows.
• FN + B: Battery Check.
• FN + Y: Enprime ekran.
• FN + U: Scroll.
• FN + I: Pran yon poz.
• FN + H: Lakay.
• FN + J: Fen.
• FN + K: Page Up.
• FN + L: Paj anba.
• FN + Efase: Mete.

4.2 Kontwòl ekleraj RGB

The Split70 features customizable RGB backlighting and light strips.

• FN + X: Turn On/Off Backlight.
• FN + Tab: Toggle Backlight Effects.
• FN + \|: Toggle Light Strip Effects.
• FN + ↑/↓: Adjust Backlight Brightness.
• FN + ←/→: Adjust Backlight Effect Speed.
• FN + ;/: Adjust Backlight Saturation.
• FN + [{/]} : Adjust Backlight Hue.

4.3 One-Click Functions

The dedicated macro keys (M1-M4) on the left half can be programmed for one-click actions:

• M1: Ctrl + Z (Undo)
• M2: Ctrl + X (Cut)
• M3: Ctrl + C (Copy)
• M4: Ctrl + V (Paste)

5. Customization (QMK/VIA)

The EPOMAKER Split70 is fully customizable with QMK/VIA software, allowing you to remap keys, set macros, and configure lighting effects with maximum freedom.

1. Vizite https://www.usevia.app/ to access the VIA web aplikasyon.
2. Download the custom JSON file for the Split70 from the EPOMAKER official websit (epomaker.com) and load it into the VIA software.
3. Connect your keyboard via wired USB-C to your computer.
4. Configure your desired key layouts, macros, and lighting settings in real-time.

6. Antretyen

6.1 Replacing Keycaps and Switches

The Split70 features hot-swappable sockets, allowing you to easily change mechanical switches without soldering. Always ensure the keyboard is disconnected before performing maintenance.

1. Retire Keycaps: Use the included keycap puller to gently remove keycaps by pulling straight up.
2. Retire switch: Use the included switch puller to grip the top and bottom clips of the switch and pull straight up.
3. Enstale switch: Align the new 3-pin or 5-pin mechanical switch with the hot-swap socket on the PCB. Ensure the pins are straight and push the switch straight down until it clicks into place.
4. Install Keycaps: Press the desired keycaps onto the new switches.

6.2 Tcheke batri

To check the current battery percentage, hold FN + B. The backlight will illuminate from 1 to 0 keys, indicating the battery percentage (e.g., 6 keys lit means 60%). To check charging status, press and hold FN + espas. A solid red FN indicator means charging, a green indicator means fully charged.

6.3 Wireless Sleep Mode

The backlight will turn off after 5 minutes of inactivity. Simply press any key to reactivate the lighting. The keyboard enters sleep mode after 30 minutes of inactivity, turning off the backlight and disconnecting from the device. Press any key to wake it up and reconnect.

NAN. Depanaj

• Pwoblèm Koneksyon: Ensure the correct mode (wired, 2.4G, or Bluetooth) is selected via the switch on the left keyboard half. For 2.4G, ensure the receiver is securely plugged in. For Bluetooth, ensure the keyboard is paired to the correct device slot (FN+Q/W/E).
• Kle yo pa reponn: Try resetting the keyboard to factory settings by holding FN + Backspace. Ensure switches are properly seated if they have been replaced.
• Backlight pa travay: Asire w ke limyè dèyè a limen (FN + X). Check brightness levels (FN + ↑).
• DFU (Firmware Update) Mode: To enter DFU mode for firmware updates, disconnect all cables from the keyboard. For the left half (with knob), hold ESC and plug in USB-C. For the right half (with arrow keys), remove the right Spacebar keycap and short-circuit PCB holes with tweezers, then plug in USB-C. Follow instructions on the QMK Toolbox.

8. Espesifikasyon

9. Garanti & Sipò

EPOMAKER products typically come with a manufacturer's warranty. For specific warranty details and to register your product, please visit the official EPOMAKER website. For technical assistance, product inquiries, or support, please contact EPOMAKER customer service directly.

Ofisyèl Websit: epomaker.com

Sipò Imèl: support@epomaker.com