Roadjoy J1207P High-Power 7000A Car Jump Starter & 150PSI Air Compressor User Manual

1. Pwodwi souview

The Roadjoy J1207P is a versatile emergency device combining a high-power car jump starter with a 150PSI air compressor. It features a 20000mAh battery, 7000A peak current for starting vehicles up to 8L gasoline and 8L diesel engines, and a 74W fast charge capability. This unit also functions as a portable power bank and includes an LED light with multiple modes for various situations.

Karakteristik kle:

• Powerful Jump Starter: 7000A peak current for 12V vehicles (up to 8L gas/8.0L diesel engines).
• Integrated Air Compressor: 150PSI with 4 preset tire pressure modes and auto-shutoff.
• Portable Power Bank: 20000mAh capacity with USB 5V 3A and USB 5V/9V/12V Quick Charge outputs, and 2*18W Type-C input.
• Limyè LED milti-mòd: Includes flashlight, warning, strobe, and SOS modes.
• Pwoteksyon Sekirite Entelijan: Features 10 safety functions including short circuit, over-temperature, over-charge, over-discharge, and reverse polarity protection.
• Ekspozisyon LCD: Clear display for operational information and battery status.

2. Enfòmasyon sou Sekirite

Tanpri li tout avètisman ak enstriksyon sekirite yo anvan ou itilize pwodui sa a. Si ou pa swiv enstriksyon sa yo, sa ka lakòz chòk elektrik, dife, ak/oswa blesi grav.

Prekosyon Sekirite Jeneral:

• Pa ekspoze pwodwi a lapli oswa kondisyon mouye.
• Pa opere pwodwi a nan atmosfè eksplozif, tankou nan prezans likid ki ka pran dife, gaz, oswa pousyè.
• Kenbe timoun yo ak moun ki t ap gade yo lwen pandan w ap opere pwodwi a.
• Store idle products out of the reach of children and do not allow persons unfamiliar with the product to operate it.
• Sèvi ak sèlman akseswa espesifye pa manifakti a.
• Do not use the product if it is damaged or modified.
• Do not disassemble the product. Refer servicing to qualified repair personnel.

Jump Starting Safety:

• Asire w machin nan nan pozisyon pak (P) oubyen net (N) epi fren pakin nan angaje.
• Wear eye protection and gloves when jump starting.
• Konekte wouj (+) clamp to the positive (+) terminal of the vehicle battery and the black (-) clamp to the negative (-) terminal or a metal part of the vehicle chassis away from the battery.
• Pa manyen kl wouj la ak nwaamps ansanm.
• If the jump starter indicates a reverse polarity connection, disconnect immediately and reconnect correctly.
• Pa eseye sote kòmanse yon batri nan frizè.

Sekirite Konpresè Lè a:

• Do not over-inflate tires. Always check the recommended tire pressure for your vehicle.
• The inflation hose may become hot during prolonged use. Avoid direct skin contact.
• Allow the unit to cool down if it becomes excessively hot during operation.

3. Pake kontni

Verifye ke tout atik ki nan lis anba a yo enkli nan pakè ou a:

• Roadjoy J1207P Jump Starter & Air Compressor Unit
• Smart Jumper Cables
• Kawoutchou enflasyon
• Nozzle Adapters (for various inflatables)
• USB-C Chaje Kab
• Ka Depo
• Manyèl itilizatè

4. Pwodwi Dyagram

Familiarize yourself with the different parts and controls of your Roadjoy J1207P unit.

1. Bouton pouvwa
2. Gonfle bouton
3. Bouton Mode
4. Bouton Inite
5. + Pressure Button
6. - Pressure Button
7. USB2 Sòti
8. USB1 Sòti
9. Kalite-C Antre
10. Ekran LCD
11. ECS Output (for jumper cables)
12. Inflation Hose Port
13. Dirije Panel limyè

5. Enstalasyon

Premye chaj:

Before first use, fully charge your Roadjoy J1207P unit. Connect the provided USB-C charging cable to the Type-C Input (9) on the unit and to a suitable USB power adapter (not included). The LCD screen (10) will display the charging status. A full charge ensures optimal performance and readiness for emergencies.

6. Operasyon Enstriksyon

6.1. Demaraj yon machin ak yon aparèy pou demaraj ak yon sovtaj

1. Asire w ke demarè a byen chaje.
2. Connect the smart jumper cables to the ECS Output (11) on the jump starter.
3. Tache wouj (+) clamp to the positive (+) terminal of the vehicle's dead battery.
4. Tache nwa (-) clamp to the negative (-) terminal of the vehicle's dead battery or a solid, unpainted metal part of the engine block.
5. Check the indicator on the smart jumper cables. A solid green light indicates a safe connection. If a red light or alarm sounds, check connections for reverse polarity or other issues.
6. Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
7. Once the vehicle starts, disconnect the black (-) clamp premye, apre sa wouj la (+) clamp, and finally remove the smart jumper cables from the jump starter.

6.2. Itilizasyon Konpresè Lè a

1. Screw the inflation hose onto the Inflation Hose Port (12) on the unit.
2. Attach the other end of the hose to the tire valve or use an appropriate nozzle adapter for other inflatables.
3. Press the Power Button (1) to turn on the unit. The LCD screen (10) will display the current pressure.
4. Press the Mode Button (3) to select the desired inflation mode (car, motorcycle, bicycle, ball, or custom).
5. Use the + Pressure Button (5) and - Pressure Button (6) to set the target pressure.
6. Press the Inflate Button (2) to start inflation. The compressor will automatically stop when the target pressure is reached.
7. Disconnect the hose from the tire valve and the unit.

6.3. Itilizasyon kòm yon Bank Pouvwa

The Roadjoy J1207P can charge your electronic devices. Connect your device's charging cable to either the USB1 Output (8) or USB2 Output (7) on the unit. The unit will automatically begin charging your device.

6.4. Sèvi ak limyè LED la

The integrated LED Panel Light (13) offers multiple modes for various situations:

• Mòd flach: Press and hold the Power Button (1) to turn on the flashlight.
• Warning/Strobe/SOS Modes: Briefly press the Power Button (1) repeatedly to cycle through warning, strobe, and SOS modes.
• Press and hold the Power Button (1) again to turn off the light.

7. Antretyen

Chaje:

To maintain battery health, fully charge the unit every 3-6 months, even if not in use. This prevents deep discharge and prolongs battery lifespan.

Netwayaj:

Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials. Keep the ventilation ports clear of dust and debris.

Depo:

Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its protective carrying case when not in use to prevent damage.

NAN. Depanaj

9. Espesifikasyon

10. Garanti & Sipò

Roadjoy provides a 2-year technical support for this product. For any questions, issues, or technical assistance, please contact our customer support team. Please have your model number (J1207P) and purchase information ready when contacting support.

Contact information can typically be found on the product packaging or the official Roadjoy websit.