ETURBEV WiFi Thermostat Temperature Controller User Manual

Pwodwi souview

The ETURBEV WiFi Thermostat Temperature Controller (Model WiFi-K1MRH3A) is designed for precise temperature management in water and electric floor heating systems. This wall-mounted digital display unit operates within an AC90V-240V range, offering both manual and automatic control modes for optimal comfort and energy efficiency.

Imaj 1: Devan view of the ETURBEV WiFi Thermostat, showing its digital display with temperature readings, day of the week, time, and various mode indicators. Below the screen are five control buttons: Power, Mode, Clock, Up, and Down.

Enstalasyon ak Enstalasyon

Proper installation is crucial for the safe and efficient operation of your thermostat. It is recommended that installation be performed by a qualified electrician.

Enstriksyon fil elektrik

Ensure the main power supply is turned off before commencing any wiring. Refer to the wiring diagram on the back of the thermostat unit for correct connections.

Imaj 2: Dèyè view of the ETURBEV WiFi Thermostat, displaying the terminal block for electrical connections. Labels include L (Live), N (Neutral), N1, L1 (Load), and NTC (Temperature Sensor) connections, along with voltage ak evalyasyon aktyèl yo.

• Konekte fil elektrik (L) ak fil net (N) ki soti nan ekipman pou pouvwa a ak tèminal ki koresponn yo sou tèmosta a.
• Connect the heating load wires (L1 and N1) to the designated load terminals.
• Connect the NTC temperature sensor wires to the NTC terminals.
• Sere tout koneksyon yo byen fèm.

Montaj

Mount the thermostat to a standard wall box using the provided screws. Ensure it is securely fastened and level.

Enstriksyon Operasyon

Operasyon debaz

1. Limen/Etenyen: Peze a Pouvwa kle a pou limen oswa etenn tèmosta a.
2. Seleksyon mòd: Peze a M kle pou chanje ant mòd manyèl ak otomatik.
3. Mòd Tanporè Otomatik: Nan mòd otomatik la, peze bouton an Up or Desann keys to enter automatic temporary mode. This mode operates for a limited duration.
4. Anviwònman revèy: Peze a Revèy key to enter the clock setting interface. Use the Up epi Desann keys to adjust the values for each parameter. Note: The WiFi model automatically obtains the internet time.

Fonksyon Lock Timoun

The child lock is disabled by default. To enable this function, access the advanced options menu. Once enabled, you can temporarily disable the child lock by long-pressing the Pouvwa bouton pou 5 segonn.

Deskripsyon mòd

• Mòd manyèl: Allows direct setting of the desired temperature.
• Mòd otomatik: Follows a pre-programmed schedule for temperature control.

Antretyen

To ensure optimal performance and longevity of your ETURBEV WiFi Thermostat, follow these simple maintenance guidelines:

• Netwayaj: Gently wipe the thermostat's surface with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the display or casing.
• Evite obstak: Ensure that the thermostat's vents (if any) are not blocked by furniture, curtains, or other objects, as this can affect temperature sensing accuracy.
• Sik pouvwa: If the thermostat becomes unresponsive, try turning off the main power supply to the unit for a few minutes, then restore power. This can often resolve minor operational glitches.

Depanaj

Si ou rankontre pwoblèm ak tèmosta ou a, gade pwoblèm ak solisyon komen sa yo:

• Thermostat pa limen:
  • Tcheke ekipman pou kouran prensipal la nan aparèy la.
  • Verify all wiring connections are secure and correct according to the installation diagram.
• Lekti tanperati ki pa kòrèk:
  • Ensure the NTC temperature sensor is properly connected and not damaged.
  • Check for drafts or heat sources near the thermostat that might affect its sensor.
• Sistèm chofaj la pa reponn:
  • Confirm the thermostat is in the correct operating mode (manual or automatic with a set temperature above ambient).
  • Verify the heating system itself is operational.
  • Check the load wiring connections (L1, N1) on the thermostat.
• WiFi connectivity issues:
  • Asire w ke rezo WiFi lakay ou a aktif epi li nan zòn ou an.
  • Restart your router and the thermostat.
  • Refer to the separate WiFi setup guide (if applicable) for detailed connection instructions.

Espesifikasyon

Garanti ak sipò

ETURBEV products are manufactured to high-quality standards. For warranty information or technical support, please contact your retailer or the manufacturer directly. Please have your model number (WiFi-K1MRH3A) and purchase date available when contacting support.

For further assistance, please visit the official ETURBEV website or contact customer service at [Insert Customer Service Contact Information Here, e.g., support@eturbev.com].