KATOOL Mini Tire Changer Machine KT-1030P Instruction Manual

1. Entwodiksyon

Thank you for choosing the KATOOL Mini Tire Changer Machine KT-1030P. This manual provides essential information for the safe and efficient operation of your new tire changer. Please read this manual thoroughly before assembly, operation, or maintenance. Keep this manual for future reference.

2. Enstriksyon Sekirite

Always prioritize safety when operating the tire changer. Failure to follow these instructions may result in injury or damage to the equipment.

• Mete ekipman pwoteksyon pèsonèl (PPE) ki apwopriye, tankou linèt sekirite ak gan.
• Asire w ke machin nan byen plase sou yon sifas ki estab e plat anvan w itilize li.
• Kenbe men ak rad lwen pati k ap deplase yo pandan w ap opere.
• Do not exceed the maximum wheel diameter or rim size specified in the specifications.
• Disconnect the air source before performing any maintenance or adjustments.
• Kenbe timoun yo ak pèsonèl ki pa otorize lwen zòn operasyon an.
• Use proper lifting techniques when handling tires and wheels to prevent injury.

3. Pwodwi souview

The KATOOL Mini Tire Changer Machine KT-1030P is designed for efficient and convenient tire removal and installation. It features a compact design suitable for various environments.

Figure 3.1: KATOOL Mini Tire Changer Machine KT-1030P with labeled components.

Figure 3.2: KATOOL Mini Tire Changer Machine KT-1030P with detailed specifications.

4. Enstalasyon ak Asanble

Follow these steps to assemble your KATOOL Mini Tire Changer Machine KT-1030P.

1. Insert the cylinder and tighten the screw.
2. Fix the foot switch in place.
3. Install the shovel.
4. Plug in the turntable and tighten the screws.
5. Fix the connection block.
6. Insert the bird head and the arm.
7. Place the turntable pull rod.
8. Connect the foot switch and the air source.
9. Verify all connections are secure before operation.

Figure 4.1: Assembly steps for the KATOOL Mini Tire Changer Machine KT-1030P.

Video: KT-1030P Detail Video

5. Operasyon Enstriksyon

This section outlines the general procedure for removing a tire using the KATOOL Mini Tire Changer Machine KT-1030P.

5.1. Tire Removal Process

1. Remove the Valve Stem: Use a valve stem remover to unscrew and remove the valve stem, releasing all air from the tire.
2. Break the Bead:
   • Position the tire in the bead breaker with the valve stem at the top. Ensure a 6-inch distance between the bead breaker and the valve stem.
   • Align the edge of the shovel with the edge of the rim, ensuring it does not contact the rim directly to avoid damage.
   • Use the foot pedal to break the bead.
   • Rotate the tire 180 degrees and repeat the bead breaking process.
3. Mount the Tire on the Machine:
   • Place the tire on the fixed hub and rotating assembly's axle.
   • Lock the wheel on the machine tightly with a crescent locking wrench.
   • Install the tire changer duck head adapter kit assembly on the hub and rotating assembly's axle.
   • Ensure the valve stem is directly below the tire changer duck head's yellow protective pad.
   • Use a hexagon wrench to adjust the hub adjustment assembly length to match the tire.
   • Adjust the height of the tire bird head to fit the edge of the rim. Ensure there is a 0.3-inch space and 0.15-inch height between the duck head and the edge of the rim.
   • Finally, tighten the hub adjustment assembly screw, ensuring it is secure and in the correct position.
4. Remove the Tire from the Rim:
   • Using the tire prying bar, position it against the edge of the rim using the knob at the top.
   • To avoid damage, use the lever to pry on the duck's beak, not the rim.
   • Push down on the left side of the tire prying bar and hold the bar.
   • Apply lubricant along the tire bead and the rim's edge.
   • Adjust the push rod assembly to the maximum angle, then lock it in the turn hub hole.
   • Press the foot pedal to rotate and remove the tire.
   • Repeat this procedure one more time.
   • After the tire has separated from the rim with one full rotation, reposition the valve stem so that it is right below the tire changer duck head's yellow protective pad.
   • Insert the tire prying bar into the base of the rim, then lift the tire by pushing down on the left side of the tire prying bar and hold the bar.
   • Adjust the push rod assembly to the maximum angle and lock it in the turn hub hole.
   • Finally, press the foot pedal to rotate and remove the tire.

Video: Tire Removal Demonstration

Video: Tire Changer Machine Operation

6. Espesifikasyon

7. Antretyen

Antretyen regilye asire lonjevite ak pèfòmans optimal chanje kawotchou ou a.

• Netwayaj: Keep the machine clean and free from dirt, grease, and tire debris. Wipe down surfaces after each use.
• Lubrifikasyon: Periodically lubricate moving parts, such as the pivot points and threads, to ensure smooth operation and prevent wear.
• Enspeksyon: Regularly inspect all components for signs of wear, damage, or loose fasteners. Tighten any loose bolts or nuts. Replace worn or damaged parts immediately.
• Sistèm lè: If applicable, ensure the air lines and connections are free from leaks and the air pressure is maintained at the recommended level (0.8 MPa).
• Depo: Store the tire changer in a dry, clean environment when not in use to prevent rust and damage.

NAN. Depanaj

Seksyon sa a bay solisyon pou pwoblèm komen ou ka rankontre.

• Difficulty Breaking Bead:
  • Ensure the tire is fully deflated.
  • Verify the bead breaker shovel is correctly positioned and not contacting the rim.
  • Apply additional lubricant to the tire bead.
• Tire Not Mounting/Dismounting Smoothly:
  • Check that the hub adjustment assembly and bird head are correctly adjusted for the tire and rim size.
  • Ensure sufficient lubrication is applied to the tire beads and rim edges.
  • Verify the tire prying bar is correctly inserted and leveraged.
• Enstabilite machin:
  • Asire w machin nan chita sou yon sifas plat epi ki estab.
  • Check all mounting bolts and fasteners for tightness.
• Air Leaks (if applicable):
  • Inspect all air connections and hoses for damage or loose fittings.
  • Tighten or replace components as necessary.

If you encounter issues not covered here or require further assistance, please contact KATOOL customer support.

9. Garanti ak sipò

For information regarding product warranty, returns, or technical support, please refer to the documentation included with your purchase or visit the official KATOOL websit la. Kenbe resi acha ou kòm prèv acha pou reklamasyon garanti.