Antec VX320 ARGB ATX Mid Tower PC Case User Manual

1. Entwodiksyon

Thank you for choosing the Antec VX320 ARGB ATX Mid Tower PC Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning installation to ensure correct assembly and to maximize the performance and longevity of your system.

Image 1.1: The Antec VX320 ARGB Mid Tower PC Case, showcasing its design and ARGB lighting in a typical desktop setup.

2. Karakteristik kle

• High Airflow Design: Features a mesh front panel and multiple ventilation points for superior cooling performance.
• Ekleraj ARGB: Equipped with four pre-installed ARGB fans (3 front, 1 rear) for customizable illumination.
• Panèl bò an vè apeze: Bay yon klè view of internal components and enhances aesthetic appeal.
• Gwo konpatibilite: Supports ATX, Micro-ATX, and Mini-ITX motherboards, along with ample space for GPUs and storage drives.
• User-Friendly I/O Panel: Conveniently located ports including USB 3.0, USB 2.0, and audio jacks.

Image 2.1: The VX320 ARGB case highlighting its unique design and effective heat dissipation capabilities through its ventilated front grille and tempered glass side panel.

Imaj 2.2: Yon imaj detaye view of the stylish mesh front panel, designed to maximize airflow for optimal cooling efficiency.

Image 2.3: Illustration of the high-airflow paths within the case, demonstrating how air intakes at the front contribute to efficient heat dissipation.

3. Pake kontni

Tanpri verifye ke tout atik yo prezan nan pake a anvan ou kontinye ak enstalasyon an:

• Antec VX320 ARGB ATX Mid Tower PC Case
• Pre-installed 120mm ARGB Fans (3 front, 1 rear)
• Bwat akseswa (vis, lyen kab, distansè)
• Manyèl Itilizatè (dokiman sa a)

4. Enstalasyon ak Enstalasyon

Follow these steps for proper installation of your components into the Antec VX320 ARGB PC Case.

4.1 Prepare Ka a

1. Mete bwat la sou yon sifas plat epi ki estab.
2. Remove the tempered glass side panel by unscrewing the thumb screws at the rear and carefully sliding it off.
3. Remove the opposite metal side panel by unscrewing the thumb screws and sliding it off.

4.2 Enstalasyon mèr

1. Install the I/O shield (if not pre-attached to your motherboard) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or Mini-ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's screw holes.
3. Sere kat manman an byen sere ak vis yo bay yo.

4.3 Enstalasyon Power Supply Unit (PSU).

1. Locate the PSU mounting area at the bottom rear of the case.
2. Slide your PSU into the designated bay from the rear of the case.
3. Secure the PSU with screws from the outside rear of the case.

4.4 Enstalasyon Disk Depo

Refer to your specific drive type (2.5" SSD/HDD or 3.5" HDD) for appropriate mounting locations within the case.

4.5 Enstalasyon Kat Grafik ak Kat Ekspansyon

1. Retire kouvèti fant PCIe ki nesesè yo nan dèyè bwat la.
2. Mete kat grafik ou a oswa lòt kat ekspansyon yo nan fant PCIe kat manman an.
3. Sere kat yo ak vis.

4.6 Connecting Front I/O Panel Cables

Connect the cables from the case's front I/O panel to the corresponding headers on your motherboard. These include:

• Power Switch (PWR SW)
• Reset Switch (RESET SW)
• Power LED (PLED +/-)
• HDD LED (HDD LED)
• USB 3.0 Header
• USB 2.0 Header
• HD Audio Header (AUDIO)
• LED Control Button (connects to ARGB controller or motherboard ARGB header)

Image 4.1: The front I/O panel, showing the location of USB 3.0, USB 2.0, audio jacks, LED control, reset, and power buttons. Ensure these are correctly connected to your motherboard.

4.7 Fan and ARGB Connections

The VX320 ARGB comes with four pre-installed ARGB fans. Connect their power cables to your motherboard's fan headers or a fan controller, and their ARGB cables to a compatible ARGB controller or motherboard ARGB header (5V 3-pin). The LED Control Button on the I/O panel can be used to cycle through ARGB effects if connected to the case's ARGB controller.

Image 4.2: The pre-installed fan configuration, featuring three 120mm ARGB fans at the front and one 120mm ARGB fan at the rear for balanced airflow.

Image 4.3: Fan mounting options, showing support for up to eight 120mm fans or various radiator configurations for enhanced cooling.

4.8 Jesyon kab

Sèvi ak ouvèti pou kab yo ak pwen mare ki dèyè plato kat manman an pou jere kab yo byen. Sa amelyore sikilasyon lè a ak aparans li.

4.9 Fèmen Ka a

Once all components are installed and cables are managed, reattach both side panels and secure them with the thumb screws.

5. Operasyon Enstriksyon

5.1 Limen

Press the Power button on the front I/O panel to turn on your system. Ensure all external peripherals (monitor, keyboard, mouse) are connected.

5.2 Kontwòl ekleraj ARGB

The pre-installed ARGB fans can be controlled via the dedicated LED Control Button on the front I/O panel. Press this button to cycle through various lighting modes and colors. Alternatively, if the ARGB controller is connected to a compatible motherboard ARGB header, you can control the lighting using your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

6. Antretyen

Regular maintenance helps ensure optimal performance and extends the lifespan of your PC components.

• Netwayaj Filtè Pousyè: Periodically remove and clean the dust filters (if present) to maintain optimal airflow and prevent dust buildup inside the case. Use compressed air or a soft brush.
• Netwayaj jeneral: Sèvi ak yon mou, damp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For the tempered glass panel, use a glass cleaner and a microfiber cloth.
• Retire pousyè entèn: Every few months, open the case and use compressed air to gently remove dust from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before performing internal cleaning.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre.

• Sistèm nan pa limen:
  • Asire w ke PSU a limen epi li byen konekte nan priz miray la.
  • Verify that the 24-pin ATX and 8-pin CPU power cables are securely connected to the motherboard.
  • Check that the front panel Power Switch cable is correctly connected to the motherboard header.
• Fans Not Spinning or ARGB Not Lighting Up:
  • Ensure fan power cables are connected to appropriate headers (motherboard or fan controller).
  • Verify ARGB cables are connected to a 5V 3-pin ARGB header on the motherboard or the case's ARGB controller.
  • If using the LED Control Button, ensure it is connected to the ARGB controller.
  • Check motherboard software for ARGB control settings.
• Pwoblèm Surchof:
  • Ensure all case fans are spinning correctly and oriented for optimal airflow (intake at front, exhaust at rear/top).
  • Clean any dust filters and internal components to prevent airflow obstruction.
  • Verify CPU cooler and GPU fans are functioning properly.

8. Espesifikasyon

9. Garanti ak sipò

Antec products come with a manufacturer's warranty. Please refer to the official Antec website or your regional distributor for specific warranty terms and conditions. For technical support, product inquiries, or warranty claims, please contact Antec customer service through their official channels.

Antec ofisyèl la Websit: www.antec.com