RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. Entwodiksyon

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. Enstalasyon

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 Debalaj ak Premye Enspeksyon

• Ak anpil atansyon retire tout eleman nan anbalaj la.
• Verifye ke tout atik ki nan lis anbalaj la prezan.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 Konekte kontwolè a

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• Pouvwa sou Ethernet (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• Adaptè pouvwa ekstèn: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• Koneksyon kamera:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Serial Control: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

Imaj 2.2: Egzanpample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 Konfigirasyon Rezo

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web koòdone pa antre adrès IP li nan yon web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• Nan la web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. Operasyon

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 Plis paseview nan Kontwòl

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

Imaj 3.2: Detaye view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 Seleksyon Kamera

• Bouton Seleksyon Rapid: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• Klavye nimerik: For cameras beyond the quick select buttons (up to 255), press the ID CAM button, then enter the camera number using the numeric keypad, and press ANTRE.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 Kontwòl PTZ

• Joysticks: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• Bouton vitès PT: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview mòd.

3.4 Ajisteman Paramèt Imaj

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: Peze a OTOFIKASYON button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• Bouton RETRO-EKLERAJ: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 Prereglaj

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press ANTRE pou sove. Peze ESC pou sòti.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press ANTRE to recall. Press ESC pou sòti.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 Navigasyon meni

• Bouton MENI: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), ANTRE confirms selections, and ESC acts as a back button.

4. Antretyen

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 Netwayaj

• Use a soft, dry cloth to clean the exterior of the controller.
• Pou pousyè tè ki difisil pou retire, yon ti kras dampRense twal la avèk dlo oswa yon solisyon netwayaj dou ki pa abrazif.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 Depo

• Lè w pa itilize kontwolè a pou yon bon bout tan, sere l nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Pwoteje aparèy la kont pousyè ak imidite.

NAN. Depanaj

Seksyon sa a bay solisyon pou pwoblèm komen ou ka rankontre.

5.1 Pa gen pouvwa

• Tcheke sous pouvwa: Asire w adaptè kouran an byen konekte ak kontwolè a ak yon priz kouran ki fonksyone.
• PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• Entegrite kab: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• Koneksyon rezo: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• Pwotokòl disparisyon: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• ID kamera: Ensure the correct camera ID is selected on the controller.
• Konekte kalifikasyon: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web koòdone.
• Koneksyon seri: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• Firmware: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support websit pou mizajou.

5.3 LCD Display Issues

• Pa gen ekspozisyon: Asire w ke kontwolè a limen.
• Dim Display: Check if there are any brightness settings on the controller that can be adjusted.

6. Espesifikasyon

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. Demonstrasyon Videyo Pwodwi

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. Garanti ak sipò

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official websit.

• Manifakti: Xiamen RGBlink Science & Technology Co.,Ltd.
• Ofisyèl Websit: www.rgblink.com (Nòt: Sa a se yon espas rezève URL, please refer to your product packaging or official documentation for the correct support websit.)
• Enfòmasyon pou kontakte: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.