AQQA AQ143 Intelligent Aquarium Heater User Manual

1. Entwodiksyon ak souview

The AQQA AQ143 Intelligent Aquarium Heater is designed to maintain a stable and precise water temperature for your aquatic pets. Featuring advanced safety mechanisms and an external controller, this heater ensures optimal conditions for fish, reptiles, and aquatic plants in tanks ranging from 3 to 220 gallons, depending on the wattage modèl.

Karakteristik kle:

• Konstriksyon dirab: Protective case made of corrosion-resistant, high-temperature materials with an explosion-proof quartz glass tube.
• Chofaj rapid: High purity nickel wire ensures quick and efficient heating.
• External Dual Display Controller: High-definition display for accurate real-time and set temperatures.
• Kontwòl Tanperati egzak: Set temperature range from 59℉-93℉ (15℃-34℃) with 1-degree increment adjustments.
• Automatic Power Off (Out of Water): Heater automatically powers off and displays error code E1 if it leaves the water surface by 2.4 inches. Resumes normal operation when fully re-immersed.
• Ultra-high Temperature Automatic Power-off: Automatically cuts off power and displays error code HH if water temperature exceeds 95℉ (35℃). Alarm releases when temperature drops below 95℉ (35℃).
• Fonksyon memwa: Kenbe paramèt yo apre yon pann kouran.
• Itilizasyon versatile: Suitable for both fresh and saltwater aquariums.

2. Enstriksyon Sekirite

Please read all safety instructions carefully before operating the AQQA AQ143 Intelligent Aquarium Heater to prevent injury or damage to the product and your aquarium inhabitants.

• Full Immersion: The heater must be completely immersed in water for use. Never operate the heater out of water.
• Peryòd Refwadi: If you need to remove the heater from the water, disconnect the power and allow it to cool down for at least 15 minutes before handling.
• Pre-use Inspection: Before first use, carefully check the glass tube for any cracks or damage. Do not use if damaged.
• Sekirite fil kouran elektrik: Ensure the power cord is not damaged or frayed. Do not use if the cord is damaged. Avoid creating a “drip loop” to prevent water from traveling along the cord to the outlet.
• Plasman: For optimal performance and safety, it is recommended to place the heater at a vertical inclination of 30-45 degrees within the aquarium.
• Itilize nan kay la sèlman: Chofaj sa a fèt pou itilize nan kay la sèlman.

3. Pake kontni

Lè w ap ouvri pake a, asire w tout bagay yo la epi yo an bon eta:

• 1 x AQQA Intelligent Aquarium Heater Unit
• 1 x External Temperature Controller with Power Cord
• 2-3 x Suction Cups (quantity may vary by model)
• 1 x manyèl itilizatè

4. Enstalasyon

1. Tache ventouse: Securely attach the provided suction cups to the heater unit. These will hold the heater in place against the aquarium glass.
2. Pozisyon aparèy chofaj la: Place the heater inside your aquarium, ensuring it is fully submerged in water. For best results, position it at a vertical inclination of 30-45 degrees. Ensure the heater is not obstructed by decorations or substrate to allow for proper water circulation.
3. Konekte ak pouvwa: Plug the external temperature controller's power cord into a suitable electrical outlet. Ensure a drip loop is formed to prevent water from reaching the outlet.

Image: AQQA Aquarium Heater installed in a fish tank, showing proper placement and the external controller.

Image: Diagram illustrating correct vertical and angled placement of the heater, and incorrect horizontal placement or partial immersion.

5. Operasyon Enstriksyon

The AQQA AQ143 heater features an external controller for easy temperature adjustment and monitoring.

1. Pouvwa sou: Once plugged in, the external controller will display the real-time water temperature (labeled 'Real' or 'Water Temp') and the set temperature (labeled 'Set Temp').
2. Mete Tanperati: Press the 'Set' button on the controller to enter setting mode. The set temperature display will flash. Use the 'Up' and 'Down' buttons (or single button press, depending on model) to adjust the desired temperature between 59℉ and 93℉ (15℃-34℃). Each press increases/decreases by 1 degree. The setting will automatically save after a few seconds of inactivity.
3. Konvèsyon Fahrenheit/Sèlsiyis: Press and hold the 'Set' button for 8 seconds to switch between Fahrenheit (℉) and Celsius (℃) display modes.
4. Endikatè chofaj: A red light on the controller indicates that the heater is actively heating the water. A blue light (or no light) indicates that the heater has reached the set temperature and is in standby mode.
5. Operasyon otomatik: The heater will automatically turn on when the water temperature falls below the set temperature and turn off once the set temperature is reached.

Image: External controller displaying real-time water temperature and user-set temperature, with heating indicator lights.

6. Antretyen

Regular cleaning and inspection are essential for the longevity and efficient operation of your AQQA Aquarium Heater.

• Frekans netwayaj: Disassemble and clean the heater once every 1-2 weeks of continuous use.
• Demonte: The heater is designed for easy disassembly. Gently pull the casing apart section by section to access the internal components for cleaning.
• Pwosedi netwayaj: Use a soft brush or cloth to remove any algae or mineral buildup from the heater unit. Rinse thoroughly with aquarium water. Do not use harsh chemicals or detergents.
• Reyasanblaj: Ensure all parts are dry and correctly reassembled before placing the heater back into the aquarium.

Image: Step-by-step guide on how to disassemble and clean the heater, along with illustrations of correct and incorrect heater placement.

NAN. Depanaj

The AQQA AQ143 Intelligent Aquarium Heater is equipped with safety features that display error codes in certain situations.

• Error Code E1 (Out of Water): If the heater leaves the water surface by 2.4 inches, it will automatically power off and display 'E1'. To resolve, ensure the heater is fully re-immersed in the water. It will automatically return to normal operation.
• Error Code HH (Ultra-high Temperature): If the real-time water temperature is detected to be above 95℉ (35℃), the heater will automatically cut off power and display 'HH'. The alarm will be released once the water temperature drops to 95℉ (35℃) or below.
• Aparèy chofaj la pa chofe: Check if the power cord is securely plugged in. Verify that the set temperature is higher than the real-time water temperature. Ensure the heater is fully submerged.
• Lekti tanperati ki pa egzak: Compare the controller's reading with a separate, reliable aquarium thermometer. If there's a significant discrepancy, ensure the controller's sensor is clean and properly positioned.

Image: Visual explanation of the 'Out of Water Power Off' (E1) and 'Ultra-high Temperature Automatic Power-off' (HH) safety features.

8. Espesifikasyon

Image: Detailed product specifications table and visual representation of different wattage heaters with their dimensions.

9. Garanti ak sipò

The AQQA AQ143 Intelligent Aquarium Heater comes with a Garanti manifakti 2 zan. For any warranty claims, technical support, or product inquiries, please contact AQQA customer service through the retailer where the product was purchased.