1. Entwodiksyon
Mèsi pou acha aasing the Fenix HP12R-T USB-C Rechargeable LED Trail Running Headlamp. This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of your device. Please read this manual thoroughly before operating the headlamp pou asire pi bon pèfòmans ak sekirite.
The Fenix HP12R-T is a high-performance headlamp designed for trail running and other outdoor activities, offering a maximum output of 1300 lumens, multiple light sources (white, neutral white, and red), and a balanced weight distribution for comfort during extended use. It features USB-C recharging, dual switch operation, and an IP66 water resistance rating.
2. Pake kontni
Verifye ke tout atik yo prezan nan pakè ou a:
- Fenix HP12R-T Headlamp
- Fenix ARB-L18-4000 Rechargeable 4000mAh Battery
- USB Kalite-C Chaje Kab
- Spare O-Ring
- Cable Clips (Qty 2)
- HP12R-T User Manual (this document)
Image: The Fenix HP12R-T headlamp, its packaging, and included accessories such as the USB-C charging cable and battery.
3. Pwodwi souview
The Fenix HP12R-T headlamp features a split design for balanced weight distribution, with the light unit at the front and the battery case at the rear. It incorporates dual switches for intuitive control of its multiple light sources.
Image: The Fenix HP12R-T headlamp shown on a natural surface, illustrating its design and key features like three light sources, 1300 lumens, separate battery case, dual switches, and red light for alerts.
4. Enstalasyon
4.1 Enstalasyon batri
- Unscrew the battery case cover located at the rear of the headlamp.
- Insert the Fenix ARB-L18-4000 rechargeable 4000mAh battery with the positive (+) terminal facing inwards.
- Screw the battery case cover back on securely. Ensure the O-ring is properly seated to maintain water resistance.
4.2 Chaje
The HP12R-T features a USB-C charging port for convenient recharging.
- Locate the USB-C charging port on the battery case.
- Plug the provided USB Type-C charging cable into the port.
- Connect the other end of the cable to a USB power source (e.g., computer, wall adapter, power bank).
- The battery level indicator lights will show charging status. A full charge is indicated when all lights are solid.
Nòt: Headl laamp can be operated while charging, but charging time may be extended.
5. Operasyon Enstriksyon
5.1 Power On/Off
- Pou limen: Long press either the white light switch or the neutral white light switch for 0.5 seconds.
- Pou etenn: Long press either switch for 0.5 seconds when the light is on.
5.2 Mode Switching (White, Neutral White, Red)
Image: A collage showing the Fenix HP12R-T headlamp in use with its three light sources: white light for trail running, neutral white light for adverse weather conditions, and red light for protecting eyesight.
- White Light & Neutral White Light: These are controlled separately by their respective switches.
- Mòd limyè wouj: Double click either switch to activate the red light mode.
5.3 Output Selection (Brightness Levels)
Imaj: Yon imaj detaye view of the Fenix HP12R-T headlamp's dual control switches, illustrating the functions for power on/off, mode switching, and output selection for white, neutral white, and red light modes.
- White Light Switch: Single click to cycle through Low → Med → High → Turbo.
- Neutral White Light Switch: Single click to cycle through Low → Med → High.
- Mòd limyè wouj: Single click either switch to cycle through Constant-On → SOS.
5.4 Rear Red Light Operation
The battery case features a rear red light for enhanced visibility and safety.
- Konstan-Limen: The rear red light automatically turns on when the headlamp se aktive.
- Flash: To switch to flash mode, press the small button on the battery case. Press again to return to constant-on.
5.5 Lockout Function
The HP12R-T includes both electronic and physical lockout features to prevent accidental activation.
Imaj: De views of the Fenix HP12R-T headlamp demonstrating its dual lockout mechanisms: electronic lockout via button sequence and physical lockout by sliding a cover over the switches.
- Lockout elektwonik: With the light off, press and hold both switches simultaneously for 3 seconds. The light will flash twice to indicate lockout. To unlock, press and hold both switches again for 3 seconds.
- Physical Lockout: Slide the protective cover over the switches to physically prevent them from being pressed.
6. Antretyen
- Netwayaj: Netwaye tèt la regilyèmanamp body with a soft cloth. For stubborn dirt, use a mild detergent. Avoid abrasive materials.
- O-Ring Maintenance: Inspect the O-ring periodically for wear and tear. Replace it if damaged to maintain the IP66 water resistance rating. Lubricate the O-ring with silicone grease as needed.
- Swen batri: Store the battery in a cool, dry place. Recharge the battery every four months if not in regular use to prolong its lifespan.
- Pò chaje: Keep the USB-C charging port clean and free of debris.
NAN. Depanaj
If your Fenix HP12R-T headlamp is not functioning correctly, please refer to the following common issues and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Headlamp pa limen. | Batri a fin itilize oswa li pa byen enstale. Headlamp is in lockout mode. | Recharge or reinstall the battery correctly. Unlock the headlamp (gade Seksyon 5.5). |
| Limyè ki soti a fèb oswa li ap tranble. | Nivo batri ki ba. Poor contact between battery and contacts. | Rechaje batri a. Netwaye kontak batri yo ak yon ti sèvyèt koton. |
| Headlamp vin cho pandan w ap itilize li. | High output levels generate heat. | This is normal for high-lumen devices. The headlamp has intelligent overheat protection to reduce output if necessary. |
| Dlo antre. | Damaged or improperly seated O-ring. | Inspect and replace the O-ring if damaged. Ensure battery case cover is tightly secured. |
If the problem persists, please contact Fenix customer support for assistance.
8. Espesifikasyon
Image: A detailed table outlining the ANSI/PLATO FL1 standards for the Fenix HP12R-T, including various light modes (White+Neutral, White, Neutral White, Red), their respective outputs, runtimes, beam distances, intensities, impact resistance, and IP66 waterproof rating.
| Karakteristik | Detay |
|---|---|
| Maksimòm Sòti | 1300 Lumen |
| Sous limyè | White, Neutral White, Red LED |
| Distans gwo bout bwa | Jiska 200 mèt (656 pye) |
| Batri | 1 x Fenix ARB-L18-4000 4000mAh Li-ion (included) |
| Chaje | USB Kalite-C Rechargeable |
| Maksimòm Runtime | 310 hours (on Low White Light mode) |
| Rezistans dlo | IP66 rated (Dustproof and protected against powerful water jets) |
| Rezistans enpak | 2 mèt |
| Headlamp Dimansyon | 2.4 cm (lajè) x 1.46 cm (wotè) x 1.10 cm (pwofondè) |
| Dimansyon ka batri | 3.62 cm (lajè) x 1.42 cm (wotè) x 1.38 cm (pwofondè) |
| Pwa | 7.02 ons (ki gen ladan batri) |
| Materyèl | Anodize aliminyòm |
Note: The above specifications are from the results produced by Fenix through its laboratory testing using one ARB-L18-4000 battery under the temperature of 21±3°C and humidity of 50% - 80%. The true performance of this product may vary according to different working environments and the actual battery used.
9. Garanti ak sipò
Fenix provides a limited warranty for its products. For detailed warranty information and to register your product, please visit the official Fenix websit oswa kontakte sèvis kliyan yo.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Fenix customer service directly. Refer to the warranty card included in your package for specific contact details or visit www.fenixlight.com.
Imèl Sèvis Kliyan: service@fenixlight.com
