Entwodiksyon
Thank you for choosing the Polibi Full XL Over Queen Metal Bunk Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bunk bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Enfòmasyon enpòtan sou sekirite
- Kapasite pwa: The upper bunk is designed to support a maximum weight of 400 lbs. The lower bunk is designed to support a maximum weight of 600 lbs. Do not exceed these limits.
- Guardrails: Always use the guardrails on the upper bunk. Ensure they are properly installed and secured before use.
- Sekirite Nechèl: Use the integrated ladder for access to the upper bunk. Do not jump on or off the bunk bed.
- Gwosè matla: Use only mattresses that comply with the recommended dimensions for each bunk to ensure proper fit and safety.
- Vantilasyon: Asire w ke ou gen ase vantilasyon toutotou kabann sipèpoze a.
- Asanble: Assembly must be performed by adults. Ensure all hardware is securely tightened before use. Periodically check and re-tighten hardware as needed.
- Pa gen sote: Do not allow children to jump on the bunk bed.
- Atik ki entèdi: Do not attach or hang items on any part of the bunk bed that are not designed for use with the bed, such as hooks, belts, or ropes, as they may pose a strangulation hazard.
Espesifikasyon pwodwi
| Karakteristik | Detay |
|---|---|
| Modèl | Full XL Over Queen Metal Bunk Bed |
| Mak | polibi |
| Materyèl | Metal lou-devwa |
| Koulè | Nwa |
| Dimansyon jeneral (L x W x H) | 82.7" x 63" x 63.7" |
| Kapasite pwa kabann siperyè a | 400 liv |
| Kapasite pwa kabann ki pi ba a | 600 liv |
| Karakteristik espesyal | Noise-Reduced Design, Safety Guardrail |
Kontni pake
Before assembly, please ensure all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Upper Bunk Frame Components
- Lower Bunk Frame Components
- Integrated Ladder Components
- Guardrails
- Metal Slats (for both bunks)
- Materyèl pou asanblaj (vis, boulon, rondelle, kle Allen)
- Manyèl Enstriksyon
Enstriksyon Asanble
It is recommended that two adults assemble this bunk bed. Clear a spacious area for assembly and keep all hardware within reach.
- Depake epi idantifye pyès yo: Carefully unpack all components and lay them out. Compare them with the parts list (if provided in the physical manual) to ensure everything is present.
- Assemble Lower Bunk Frame: Begin by connecting the side rails and end frames for the lower bunk. Secure all connections with the provided hardware, but do not fully tighten until the frame is complete.
- Install Lower Bunk Slats: Once the lower bunk frame is assembled, place and secure the metal slats onto the designated supports. Ensure all slats are evenly spaced and firmly attached.
- Assemble Upper Bunk Frame: Repeat the process for the upper bunk frame, connecting the side rails and end frames.
- Install Upper Bunk Slats: Secure the metal slats for the upper bunk.
- Attach Upper Bunk to Lower Bunk: Carefully lift the assembled upper bunk frame and align it with the designated connection points on the lower bunk frame. Secure with the appropriate hardware. This step may require two people.
- Enstale balistrad yo: Attach the full-length guardrails to the upper bunk, ensuring they are securely fastened to prevent accidental falls.
- Attach Integrated Ladder: Connect the integrated ladder to the bunk bed frame. Ensure it is stable and securely attached for safe climbing.
- Sere final la: Once all components are assembled, go back and fully tighten all screws and bolts. Do not overtighten.
- Enspekte: Perform a final inspection to ensure all parts are correctly assembled, stable, and secure before placing mattresses on the bunks.
Gid pou Itilizasyon
- Ensure mattresses are properly seated within the frame and do not extend beyond the guardrails on the upper bunk.
- Se yon sèl moun ki ta dwe okipe kabann anwo a alafwa.
- Do not use the bunk bed if any part is broken or missing.
- Regularly check all connections and hardware for tightness.
Swen ak Antretyen
- Netwayaj: Siye ankadreman metal la ak yon twal mou,amp twal. Evite itilize pwodui chimik ki agresif oswa pwodui netwayaj abrazif, ki ka domaje fini an.
- Enspeksyon: Periodically inspect all structural components, including the frame, slats, ladder, and guardrails, for any signs of wear, damage, or loose connections.
- Materyèl: Re-tighten all bolts and screws every 3-6 months to ensure the bed remains stable and secure.
- Anviwònman: Keep the bunk bed in a dry environment to prevent rust or corrosion.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Bed feels wobbly or unstable | Koneksyon pyès ki nan konpitè ki lach. | Tcheke epi sere tout boulon ak vis yo. Asire w tout pyès yo byen aliyen. |
| Bri ki fè bri | Koneksyon ki lach oswa friksyon ant pati metal yo. | Tighten all hardware. Apply a small amount of lubricant (e.g., silicone spray) to connection points if noise persists. |
| Ladder feels insecure | Ladder not properly attached or hardware is loose. | Verify the ladder is correctly installed and all attachment hardware is securely tightened. |
| Pati ki manke pandan asanblaj la | Erè nan anbalaj oswa pyès ki pèdi. | Do not proceed with assembly. Contact Polibi customer support immediately for replacement parts. |
Garanti ak sipò pou kliyan
Polibi products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Polibi website. If you have any questions, require assistance with assembly, or need replacement parts, please contact Polibi customer support through the retailer where the product was purchased or via the contact information provided on the Polibi brand store.
Pou plis enfòmasyon, ou ka vizite Polibi Store on Amazon.
