Jesebang YT18 Wireless Earbuds

Entwodiksyon

Thank you for choosing the Jesebang YT18 Wireless Earbuds. This manual provides detailed instructions to help you set up, operate, and maintain your earbuds for optimal performance. Please read this manual thoroughly before use and retain it for future reference.

Ki sa ki nan bwat la

Pake a gen ladan atik sa yo:

• 2 x YT18 Wireless Earbuds
• 1 x Portable Chargement Case
• 1 x USB-C chaje kab
• 3 x Pairs of Silicone Earplugs (S/M/L)
• 1 x manyèl itilizatè

Image: Contents of the Jesebang YT18 Wireless Earbuds package.

Pwodwi souview

The Jesebang YT18 Wireless Earbuds feature an over-ear design with ear hooks for a secure fit, making them suitable for sports and active use. The charging case includes an LED display to show battery levels.

Image: Dimensions of the Jesebang YT18 charging case and earbuds.

Kòmanse

1. Chaje ekoutè yo ak bwat la

Before first use, fully charge the earbuds and the charging case. Place the earbuds into the charging case. Connect the USB-C charging cable to the charging port on the case and to a power source. The LED display on the case will indicate the charging status and battery level.

Image: USB-C charging port and LED display on the charging case.

Image: Battery life indicators for earbuds and charging case.

2. Mete ekoutè yo

For optimal sound quality and comfort, choose the correct size silicone earplugs (S, M, L) that fit your ears. The earbuds are designed with flexible ear hooks for a secure fit during physical activity.

1. Pick up the headphones and choose the best fit from the 3 different ear tips (S, M, L).
2. Plug the headphones along the ear canal into the ears.
3. Revolve the ear hooks until they are inserted behind the ears.
4. Adjust the headphones to your comfortable angle.

Image: Instructions for stable wearing of the earbuds.

3. Konekte ak aparèy ou an

The earbuds feature one-step auto-pairing after the initial setup.

1. Retire ekoutè yo nan ka chaje a. Yo pral otomatikman antre nan mòd appariement.
2. On your device (smartphone, tablet, etc.), activate Bluetooth settings.
3. Chèche pou "YT18" in the list of available devices and select it to connect.
4. Yon fwa yo konekte, ekoutè yo ap konekte otomatikman ak aparèy ou an lè ou retire yo nan bwat la.

Image: One-step auto-pairing process.

Operating Instructions: Touch Controls

The earbuds are equipped with touch sensors for easy control of various functions:

• Jwe/Poz: Tape 2 fwa
• Pwochen chante: Tap and hold for 2 seconds (Right earbud)
• Chante Previous: Tap and hold for 2 seconds (Left earbud)
• Volim moute: Tap 1 time (Right earbud)
• Volim desann: Tap 1 time (Left earbud)
• Reponn/Fen Apèl: Tape 1 fwa
• Rejte apèl: Tape epi kenbe pou 2 segonn
• Aktive Asistan Vwa a (Siri): Tape 3 fwa

Image: Touch control functions diagram.

Karakteristik kle

Avanse Bluetooth 5.4

The earbuds utilize Bluetooth 5.4 technology for a stable and efficient wireless connection. This technology provides faster transmission speeds and a connection range of up to 15 meters.

Image: Advanced Bluetooth 5.4 technology.

Odyo-wo kalite

Equipped with 14.2mm dynamic drivers, the YT18 earbuds deliver balanced audio with clear highs, mids, and defined low frequencies, enhancing your listening experience.

Image: Internal components for high-quality audio.

Clear Calls with ENC Noise Cancelling

The earbuds feature 4 ENC (Environmental Noise Cancellation) microphones to filter out ambient noise, ensuring your voice is clear during calls, even in noisy environments.

Image: Dual ENC microphones for noise cancellation.

Pwolonje lavi batri

Enjoy up to 8 hours of music playback on a single charge. The portable charging case extends the total battery life to up to 48 hours, providing power for extended use.

Image: 48 hours ultra-long playtime and LED display.

IP7 Waterproof Rating

The earbuds feature an IP7 waterproof rating, providing protection against sweat and rain. This makes them suitable for workouts and outdoor activities.

Image: IP7 dust and water resistance for active use.

Espesifikasyon

Depanaj

If you encounter any issues with your Jesebang YT18 Wireless Earbuds, please refer to the following common solutions:

• Ekoutè yo pa konekte: Ensure both earbuds are removed from the charging case. Turn off and on your device's Bluetooth, then try pairing again. If issues persist, try resetting the earbuds (refer to manufacturer's specific reset instructions if available, otherwise place back in case and try re-pairing).
• Se yon sèl ekoutè k ap fonksyone: Place both earbuds back into the charging case, close the lid, wait a few seconds, then remove them. This often re-syncs them.
• Volim ki ba oswa kalite son ki pa bon: Check the earbud fit and try different sized ear tips. Ensure the earbuds and your device's volume are turned up. Clean any debris from the earbud speakers.
• Pwoblèm chaj: Ensure the charging cable is securely connected to both the case and the power source. Check if the charging pins on the earbuds and inside the case are clean and free of obstruction.
• Kontwòl taktil yo pa reponn: Asire w dwèt ou yo pwòp epi sèk. Eseye rekòmanse ekoutè yo lè w mete yo nan bwat la epi retire yo ankò.

Swen ak Antretyen

• Keep the earbuds and charging case clean and dry.
• Wipe the earbuds with a soft, dry cloth. Do not use abrasive cleaners.
• Clean the charging contacts on the earbuds and in the case regularly with a dry cotton swab to ensure proper charging.
• Sere ekoutè yo nan bwat chaje a lè w pa ap itilize yo pou pwoteje yo epi konsève batri.
• Evite tanperati ekstrèm ak limyè solèy la dirèk.
• While the earbuds are IP7 waterproof, avoid prolonged submersion in water.

Garanti ak sipò

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Jesebang customer service through their official channels. Keep your proof of purchase for warranty claims.