1. Entwodiksyon
This manual provides instructions for the installation and operation of your BN-LINK CP-UWLD28 Dimmer Light Switch. This dimmer switch is designed for single-pole applications and requires a neutral wire for proper functionality. It supports dimmable LED, CFL, and incandescent light bulbs, offering two distinct dimming modes and a memory function to recall your last brightness setting.
2. Ki sa ki nan bwat la
- 1x Dimmer Light Switch
- 1x plak miray
- 4x Fil nwa
- 2x Long Vis
- 2x Vis Kout
- 1x Manyèl Itilizatè (dokiman sa a)
Image: The package contents, including the dimmer switch, wall plate, wire nuts, and mounting screws.
3. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mòd operasyon | ON-OFF |
| Rating aktyèl | 3 Amps |
| Opere Voltage | 125 Volts |
| Aparèy konpatib | Dimmable LED (3W-150W), CFL (3W-150W), Incandescent (3W-400W) |
| Kalite kontwòl | Manyèl Pouse bouton |
| Pwotokòl Koneksyon | N.A (No WiFi) |
| Dimansyon (L x W x H) | 4.49 x 2.76 x 1.34 pous |
| Pwa atik | 5 ons |
| Koulè | Blan |
Image: Product dimensions of the dimmer switch.
4. Enstalasyon
Enpòtan: Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring. Ensure power is turned off at the circuit breaker before beginning installation.
- Etenn pouvwa: Locate the circuit breaker controlling the light switch you intend to replace and turn off the power. Verify the power is off using a voltage tèsteur.
- Retire ansyen switch la: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
- Idantifye fil yo: Idantifye fil elektrik sa yo ki nan bwat elektrik ou a:
- Fil Liy: Li pote kouran an soti nan disjonktè a.
- Fil chaj: Li konekte ak aparèy limyè a.
- Fil net: Typically white, required for this dimmer switch.
- Fil tè: Bare copper or green.
- Wire the Dimmer Switch: Connect the wires from the dimmer switch to the corresponding wires in the electrical box using the provided wire nuts. Refer to the wiring diagram below.
- Dimmer switch Blan Fil to Wall Box Fil net
- Dimmer switch Fil Nwa to Wall Box Power Supply's Line (Live)
- Dimmer switch Fil wouj to Wall Box Chaj Fil
- Dimmer switch Fil vèt to Wall Box Fil tè
- Monte switch la: Carefully push the wired dimmer switch into the electrical box. Secure it with the provided screws.
- Enstale Plak Mi: Attach the new wall plate over the dimmer switch.
- Retabli pouvwa: Retounen kouran nan disjoncteurs a.
Image: Wiring diagram for single-pole installation. Ensure a neutral wire is available.
Note: This dimmer switch works in single-pole only and requires a neutral wire. It is not a smart dimmer switch and cannot be connected to Wi-Fi.
5. Operasyon
The BN-LINK Dimmer Light Switch features intuitive controls for adjusting light brightness and an indicator light for visibility in the dark.
Premye itilizasyon
During the first use, press the power button on the dimmer switch. The initial brightness of the light is set at 100%. Use the "+" and "-" buttons for fast adjustments and fine adjustment.
Video: Demonstration of the BN-LINK Dimmer Light Switch's operation, including fast and fine dimming adjustments and memory function.
Kontwòl souview
Image: Labeled buttons on the dimmer switch for power, dimming up, and dimming down, with indicator lights.
- Bouton pouvwa: Press to turn the lighting On/Off.
- Dimmer "+" Button:
- Fast Adjustment: Press briefly to increase brightness by 10% each time.
- Ajisteman byen: Press and hold to gradually increase brightness by 1% each time. - Dimmer "-" Button:
- Fast Adjustment: Press briefly to decrease brightness by 10% each time.
- Ajisteman byen: Press and hold to gradually decrease brightness by 1% each time. - Limyè endikatè: Display the current brightness level (20%, 40%, 60%, 80%, 100%).
Image: Visual representation of the fast (10% increments) and fine (1% increments) brightness adjustment modes.
Fonksyon memwa
The dimmer switch remembers the last brightness level used and restores it automatically the next time the light is turned on.
Image: The thoughtful indicator light helps locate the dimmer easily in the dark.
6. Konpatibilite
This dimmer switch is compatible with various dimmable light sources:
- Dimmable dirije: 3-150W, 125V/60Hz
- CFL reglabl: 3-150W, 125V/60Hz
- Enkandesan Lamp: 3-400W, 125V/60Hz
Please ensure that your fluorescent lamp ak dirije lamp are dimmable, and the total load of the bulbs is within the specified range.
Image: Illustration of wide compatibility with incandescent, dimmable LED, and dimmable CFL bulbs.
