GAMDIAS Aura GC10m V2 WH Micro-Tower Computer Case User Manual

Entwodiksyon

The GAMDIAS Aura GC10m V2 WH is a micro-tower computer case designed for Micro-ATX and Mini-ITX motherboards. It features a dual-chamber design, panoramic tempered glass panels, and comes equipped with three Addressable RGB (ARGB) fans to enhance system aesthetics and cooling. This manual provides essential information for the proper installation, operation, and maintenance of your computer case.

Imaj: Devan view of the GAMDIAS Aura GC10m V2 WH Micro-Tower Computer Case, showcasing its tempered glass panels and pre-installed ARGB fans.

Enstalasyon ak Enstalasyon

Before beginning installation, ensure you have all necessary components and tools. Refer to your motherboard and component manuals for specific installation instructions.

1. Prepare Ka a

Carefully remove the tempered glass side and front panels. These are typically secured with thumbscrews or a latch mechanism. Place them on a soft, flat surface to prevent scratches.

Imaj: Angle view of the case with the tempered glass side panel removed, showing the internal structure and fan mounts.

2. Enstalasyon mèr

• Install the I/O shield (if not pre-attached to your motherboard) into the rear opening of the case.
• Align your Micro-ATX or Mini-ITX motherboard with the standoffs inside the case.
• Secure the motherboard using the provided screws.

Imaj: Entèn view of the case, highlighting the motherboard tray area and fan mounting points.

3. Enstalasyon Inite Alimantasyon (PSU)

• Install your PSU into its designated compartment, typically at the rear bottom of the case.
• Fikse PSU a ak vis nan dèyè bwat la.
• Ensure the PSU fan faces the correct direction for optimal airflow (usually downwards if there's a vent, or upwards if not).

Image: Rear internal view of the case, showing the PSU mounting area and cable routing options.

4. Kondwi Enstalasyon

• 3.5" / 2.5" Drive Bay (HDD Cage): Locate the HDD cage. Install one 3.5" HDD or one 2.5" SSD/HDD.
• Espas pou kondwi 2.5 pous: The case supports three additional 2.5" SSDs/HDDs. Mount these drives to the designated brackets or locations within the case.

5. Enstalasyon Vantilatè ak Radyatè

The case comes with three pre-installed ARGB fans (two side, one rear). Additional fans or radiators can be installed in the following locations:

• Top: Supports 3 x 120mm or 2 x 140mm fans; 360mm or 280mm radiators.
• Bò: Supports 2 x 120mm or 2 x 140mm fans; 240mm radiators. (Pre-installed 2 x 120mm ARGB fans)
• Anba: Supports 3 x 120mm or 2 x 140mm fans.
• Dèyè: Supports 1 x 120mm or 1 x 140mm fan; 120mm radiators. (Pre-installed 1 x 120mm ARGB fan)

Imaj: Entèn view showing the pre-installed ARGB fans on the side and rear, illustrating fan placement.

6. Connecting Front I/O Ports and ARGB

Connect the following cables from the case to your motherboard:

• USB 2.0: Connect the USB 2.0 header cable.
• Kalite-C: Connect the USB Type-C header cable (if your motherboard supports it).
• Odyo HD: Connect the HD Audio header cable.
• Pouvwa/Reyajiste/LED: Connect the front panel power, reset, HDD LED, and power LED cables according to your motherboard manual.
• ARGB Fans: Connect the ARGB fan cables to your motherboard's 5V ARGB header or to the integrated ARGB controller (if applicable). The case includes an LED Switch Button for controlling ARGB lighting if connected to the case's internal controller.

Imaj: Anlè view of the case, showing the front I/O panel with USB ports and the LED switch button.

Operasyon

Limen

Once all components are installed and connected, close the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel of the case to start your system.

Kontwòl ekleraj ARGB

The pre-installed ARGB fans can be controlled in two ways:

• Bouton switch ki ap dirije: If the ARGB fans are connected to the case's internal controller, press the dedicated LED Switch Button on the front I/O panel to cycle through various lighting effects and colors.
• Lojisyèl kat manman: If the ARGB fans are connected directly to a compatible 5V ARGB header on your motherboard, you can control the lighting effects using your motherboard's proprietary RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).

Antretyen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite konpozan òdinatè w la.

• Filtè Pousyè: The case features removable dust filters (e.g., on the top and bottom). Periodically remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Netwayaj Ka: Sèvi ak yon mou, damp cloth to clean the exterior surfaces of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth. Avoid abrasive cleaners.
• Retire pousyè entèn: Every few months, open the case and use compressed air to remove dust from internal components, especially fan blades and heatsinks.

Depanaj

If you encounter issues, consider the following common solutions:

• Sistèm nan pa limen:
  • Asire w ke PSU a limen epi li byen konekte nan priz miray la.
  • Verify all power cables (24-pin ATX, CPU, GPU, drives) are securely connected.
  • Check that the front panel power button cable is correctly connected to the motherboard.
• ARGB Fans Not Lighting Up/Spinning:
  • Confirm ARGB cables are securely connected to a 5V ARGB header on the motherboard or the case's controller.
  • Ensure fan power cables are connected to appropriate fan headers on the motherboard or PSU.
  • If using motherboard software, verify it is installed and configured correctly.
• Pò Antre/Sòti Devan yo pa Ap Travay:
  • Check that the USB and HD Audio cables from the front panel are correctly connected to their respective headers on the motherboard.

For persistent issues, consult your motherboard manual or contact GAMDIAS support.

Espesifikasyon

Enfòmasyon sou Garanti

For detailed warranty terms and conditions, please refer to the official GAMDIAS websit la oswa kat garanti ki vini ak pwodwi ou a. Kenbe prèv acha ou pou reklamasyon garanti.

Sipò pou Kliyan

If you require further assistance or have questions regarding your GAMDIAS Aura GC10m V2 WH computer case, please contact GAMDIAS customer support.

• Manifakti: GAMDIAS TAIWAN
• Adrès: No. 113, Jian 2nd Rd., Zhonghe, Dist., New Taipei City 235, Taiwan
• Enpòtatè (End): Allway Distributions Pvt Ltd, No-49, H.B. Samajha Road, Baswangudi , Bengaluru- 560004
• Importer Contact (India): 8904307700
• Ofisyèl Websit: www.gamdias.com (Tanpri tcheke ofisyèl la website for the most up-to-date support contact information and resources.)