GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your system components.

Figure 1: GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case, showcasing its panoramic design and illuminated ARGB fans.

2. Enfòmasyon sou Sekirite

Obsève prekosyon sekirite sa yo pou evite domaje pwodwi a oswa blese tèt ou:

• Always disconnect the power supply from the wall outlet before performing any installation or maintenance.
• Handle internal components with care to avoid electrostatic discharge (ESD) damage. Consider using an anti-static wrist strap.
• Keep the case away from water, moisture, and extreme temperatures.
• Asire bon vantilasyon pou anpeche surchof.
• Do not attempt to open or repair the power supply unit (PSU) if it is integrated; refer to qualified service personnel.
• Keep small parts and screws out of reach of children.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case
• Bwat akseswa (ki gen ladan l vis, fil elektrik, ak lòt ti pyès)
• Manyèl Itilizatè (dokiman sa a)
• Pre-installed ARGB Fans (2 x 120mm side, 1 x 120mm rear)

4. Idantifikasyon konpozan

Familiarize yourself with the various parts of the GAMDIAS Aura GC10m V2 case:

Figi 2: Devan view of the case, highlighting the tempered glass panel.

Figi 3: Dèyè view of the case, indicating motherboard I/O cutout, expansion slots, and rear fan mount.

Figure 4: Top I/O Panel featuring USB Type-C, USB 2.0, HD Audio, and LED switch button.

Konpozan kle:

• Panno an vè apeze: Front and side panels for component visibility.
• Pò I/O: Located on the top panel, includes 1x USB Type-C, 1x USB 2.0, HD Audio, and an LED switch button.
• Fan Mounts: Multiple locations for cooling fans and radiators (Top, Side, Bottom, Rear).
• Kondwi Bays: Dedicated spaces for 3.5" HDDs and 2.5" SSDs.
• Fant ekspansyon: For graphics cards and other PCIe devices.

5. Gid Enstalasyon

Follow these steps for proper installation of your PC components:

5.1. Prepare Ka a

1. Mete bwat la sou yon sifas plat epi ki estab.
2. Carefully remove the tempered glass side panel by unlatching the simple clasp mechanism.

Figure 5: Removing the tempered glass side panel using the clasp mechanism.

5.2. Enstalasyon mèr

1. Install the I/O shield (if not pre-attached to your motherboard) into the rear opening of the case.
2. Align your Micro-ATX or Mini-ITX motherboard with the standoffs inside the case.
3. Secure the motherboard using the appropriate screws from the accessory box.

5.3. Enstalasyon Inite Alimantasyon (PSU)

1. Locate the PSU mounting area, typically at the rear bottom of the case.
2. Slide the PSU into position and secure it with screws from the rear of the case.

5.4. Enstalasyon Disk Depo

1. For 3.5" HDDs: Install into the designated HDD cage.
2. For 2.5" SSDs: Mount onto the dedicated 2.5" drive bays.
3. Secure drives with screws.

5.5. Graphics Card (VGA) and Expansion Card Installation

1. Retire kouvèti fant ekspansyon ki nesesè yo nan dèyè bwat la.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Sere kat yo ak vis.

5.6. Enstalasyon Vantilatè ak Radyatè

Ka a sipòte plizyè konfigirasyon fanatik ak radyatè:

• Top: Up to 3 x 120mm or 2 x 140mm fans; Radiator up to 360mm or 280mm.
• Bò: Up to 2 x 120mm or 2 x 140mm fans; Radiator up to 240mm.
• Anba: Up to 3 x 120mm or 2 x 140mm fans.
• Dèyè: 1 x 120mm or 1 x 140mm fan; Radiator up to 120mm.

Figure 6: Cooling support diagram for fan and radiator placement.

5.7. Jesyon kab

Sèvi ak ouvèti pou kab yo ak pwen mare ki dèyè plato kat manman an pou òganize kab yo. Sa amelyore sikilasyon lè a ak estetik li.

6. Operasyon

6.1. Limen

After all components are installed and cables are connected, close the side panel. Connect the power cable to the PSU and a wall outlet, then press the power button on the top I/O panel to start your system.

6.2. Kontwòl ekleraj ARGB

The pre-installed ARGB fans can be controlled via the dedicated LED switch button on the top I/O panel. Press the button to cycle through various lighting modes and colors. For advanced synchronization with other ARGB components, connect the case's ARGB header to a compatible motherboard's 5V 3-pin ARGB header and use the motherboard's software.

7. Antretyen

7.1. Netwayaj

• Regularly clean dust filters to maintain optimal airflow.
• Use a soft, dry cloth to wipe down exterior surfaces.
• For interior cleaning, use compressed air to remove dust from components and fan blades. Ensure the system is powered off and unplugged.

7.2. Antretyen fanatik

Periodically check fan blades for dust buildup. Clean them gently with a soft brush or compressed air. Ensure fans are securely mounted and free from obstructions.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre:

9. Espesifikasyon teknik

Detailed specifications for the GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case:

Figi 7: Plis paseview of key technical specifications.

10. Garanti ak sipò

For warranty information and technical support, please refer to the official GAMDIAS websit la oubyen kontakte détayan lokal ou a. Kenbe prèv acha ou pou reklamasyon garanti.

Manifakti: GAMDIAS TAIWAN, No. 113, Jian 2nd Rd., Zhonghe, Dist., New Taipei City 235, Taiwan

Enpòtatè (End): Allway Distributions Pvt Ltd, No-49, H.B. Samajha Road, Baswangudi, Bengaluru- 560004, Contact -8904307700