OSRAM Endura Outdoor Solar LED Projector (Model 4099854429439) Instruction Manual

1. Entwodiksyon

Thank you for choosing the OSRAM Endura Outdoor Solar LED Projector. This solar-powered floodlight is designed for outdoor use, providing efficient illumination with its integrated PIR motion detector and daylight sensor. The external solar panel and 5-meter connection cable offer flexible installation options. This manual provides essential information for the safe and effective use of your product.

2. Enfòmasyon sou Sekirite

Please read all safety instructions carefully before installation and operation. Retain this manual for future reference.

2.1 Battery Safety Warning

• Kenbe pil yo pa rive jwenn timoun yo. Ingestion can lead to chemical burns, perforation of soft tissues, and death. Severe burns can occur within 2 hours of ingestion. Seek immediate medical attention.
• If the battery compartment (if applicable) does not close securely, discontinue use of the product and keep it away from children.
• If you suspect batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.

2.2 Gid Sekirite Jeneral

• Maksimòm Tanperati Anbyen: Do not operate the product in ambient temperatures exceeding +35 °C.
• Opere altitid: This product is designed for operation at altitudes up to 2000 meters.
• Ranplasman batri: Replacing a battery with an incorrect type may neutralize safety features (e.g., in the case of certain lithium battery types).
• Dispozisyon batri: Do not dispose of batteries in fire or a hot oven, or mechanically crush or cut a battery, as this may result in an explosion.
• Ensure all connections are secure and properly insulated during installation.
• Do not attempt to modify or disassemble the product. Refer all servicing to qualified personnel.

3. Pake kontni

Verifye ke tout konpozan yo prezan epi yo pa domaje lè w ap debalaje.

• 1x OSRAM Endura Flood Split Solar Sensor 30W Projector
• 1x External Photovoltaic Solar Panel
• 1x kontwòl Remote
• 1x 5-meter Connection Cable (connecting projector and solar panel)
• Mounting and connection accessories (screws, anchors, etc.)

Figi 3.1: Contents of the OSRAM Endura Outdoor Solar LED Projector package, showing the projector, solar panel, and remote control.

4. Pwodwi souview

The OSRAM Endura Outdoor Solar LED Projector consists of a main LED floodlight unit and a separate solar panel, connected by a 5-meter cable for flexible placement. It features an integrated PIR motion sensor and a daylight sensor for automatic operation.

Figi 4.1: Example installation of the OSRAM Endura Outdoor Solar LED Projector on a building, demonstrating its application in outdoor environments.

4.1 Konpozan kle

• LED Projector: The main lighting unit with integrated PIR motion sensor and daylight sensor.
• Panèl solè: Collects solar energy to charge the internal battery. Designed for optimal sun exposure.
• Kab koneksyon 5m: Allows for separate mounting of the projector and solar panel.
• Kontwòl Remote: For adjusting sensor settings, brightness, and manual operation.

5. Enstalasyon ak Enstalasyon

The OSRAM Endura Outdoor Solar LED Projector is designed for straightforward installation. Ensure you have the necessary tools (drill, screwdriver, pencil, measuring tape) before beginning.

5.1 Choosing Installation Locations

• Panèl solè: Select a location that receives direct sunlight for the majority of the day to ensure optimal battery charging. Avoid shaded areas.
• LED Projector: Mount the projector in the desired area for illumination, such as building facades, garages, or garden sheds. Consider the detection range of the PIR sensor. The 5-meter cable allows for flexible placement of the projector away from the solar panel.

5.2 Etap montaj

1. Make pwen perçage yo: Use the mounting brackets of both the projector and the solar panel to mark the drilling points on the chosen surfaces.
2. Fè twou: Fè twou nan pwen ki make yo. Mete ankraj miray si sa nesesè.
3. Mount Solar Panel: Securely attach the solar panel bracket to the wall using the provided screws. Adjust the panel's angle for maximum sun exposure.
4. Mount Projector: Securely attach the projector bracket to the wall using the provided screws. Adjust the projector's angle to cover the desired area.
5. Konekte kab: Connect the 5-meter cable from the solar panel to the projector. Ensure a secure and weather-resistant connection.
6. Aktivasyon inisyal: Locate the power button on the projector (often a small, recessed button) and press it to activate the unit. The light may perform a brief test sequence.

Figi 5.1: Dimensional drawing showing the measurements of the projector and solar panel for installation planning.

6. Operasyon Enstriksyon

The OSRAM Endura Outdoor Solar LED Projector operates automatically based on its integrated sensors and can be further controlled using the provided remote.

6.1 Operasyon otomatik

• Sensor lajounen: The projector will not activate during daylight hours, conserving battery power. It will only become active when ambient light levels fall below a certain threshold.
• Detektè Mouvman PIR: Once active (at night), the projector will automatically turn on when motion is detected within its range. It will remain on for a set duration (adjustable via remote) and then turn off if no further motion is detected.

6.2 Fonksyon kontwòl Remote

The remote control allows for advanced customization of the projector's operation. Ensure the remote is pointed directly at the projector for optimal response.

• ON/OFF: Manually turn the projector on or off.
• TÈS: Activates a test mode for sensor functionality.
• MOD: Cycles through different operating modes (e.g., sensor mode, continuous light for a set duration).
• TIME (3H, 5H, 8H): Sets the duration for which the light stays on after motion detection or in continuous mode.
• Brightness Control (+/-): Adjusts the light intensity (dimmable).
• Sensibilite Capteur: Adjusts the sensitivity of the PIR motion detector.

Note: The remote control's effective range may be limited. Ensure direct line of sight to the projector.

7. Antretyen

Regular maintenance ensures optimal performance and longevity of your solar LED projector.

• Netwaye panèl solè a: Siye panèl solè a detanzantan avèk yon twal mou.amp twal pou retire pousyè, salte, ak debri. Yon panèl pwòp asire maksimòm absòpsyon limyè solèy la ak efikasite chaj.
• Cleaning the Projector: Clean the projector lens and housing with a soft, damp twal. Evite pwodui netwayaj abrazif oswa solvan.
• Batri: The internal battery is designed for long-term use. Do not attempt to replace the battery yourself. Refer to qualified service personnel if battery issues arise.
• Enspeksyon kab: Periodically check the connection cable for any signs of wear, damage, or fraying. Ensure connections remain secure and waterproof.

NAN. Depanaj

If you encounter issues with your OSRAM Endura Outdoor Solar LED Projector, refer to the following common problems and solutions.

9. Espesifikasyon

Technical details for the OSRAM Endura Outdoor Solar LED Projector (Model 4099854429439).

10. Garanti ak sipò

OSRAM provides a 3-ane garanti for this product, as indicated on the packaging. For warranty claims or technical support, please contact your retailer or visit the official OSRAM/LEDVANCE websit entènèt pou jwenn enfòmasyon sou sèvis kliyan.

Manifakti: LEDVANCE
Websit: www.ledvance.com (General information, check for specific support contacts for your region)