Entwodiksyon
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your COSTWAY Outdoor Daybed with Retractable Canopy. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Enfòmasyon sou Sekirite
Li enpòtan pou respekte direktiv sekirite sa yo pou yon operasyon an sekirite epi pou anpeche blesi oswa domaj nan pwodwi a.
- Toujou rasanble dapre enstriksyon yo bay la.
- Be cautious of sharp edges when handling components during assembly.
- Keep the canopy away from open flames or heat sources to prevent fire hazards.
- Do not exceed the maximum weight capacity of 800 lbs (approximately 363 kg). Overloading can cause structural failure and injury.
- Ensure the product is stable and securely placed on a level surface before use, especially in outdoor environments where wind or uneven ground may pose a risk.
- Regularly inspect all fasteners and connections to ensure they remain tight. Tighten as necessary.
- Do not allow children to play on or around the daybed unsupervised.
Kontni pake
Before beginning assembly, verify that all parts listed in the packing list are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
Konpozan tipik yo enkli:
- Main frame sections (metal and rattan)
- Retractable canopy frame and fabric
- Seat cushions and back cushions
- Pneumatic rods for canopy and side tables
- Hardware pack (screws, washers, nuts, Allen wrench)
- Manyèl enstriksyon
Enstalasyon ak Asanble
Assembly typically requires two people and takes approximately 1-2 hours. Follow these steps carefully:
- Depake konpozan: Retire tout pyès yo nan anbalaj la avèk prekosyon. Mete yo sou yon sifas mou epi pwòp pou evite reyur.
- Idantifye pati yo: Refer to the parts list and diagrams in your specific packing list to identify each component.
Figure 1: Product Dimensions. This diagram illustrates the overall dimensions of the daybed and its components, including the seat height, cushion sizes, and canopy height. - Rasanble ankadreman: Connect the main frame sections using the provided hardware. Important: Do not fully tighten all screws until all holes are aligned and all components are loosely fitted. This allows for easier adjustment.
- Attach Side Tables: Secure the retractable side tables to the main frame. Ensure the pneumatic rods are correctly installed to allow for smooth operation.
Figure 2: Retractable Side Tables. This image demonstrates the functionality of the side tables, which can be extended to hold items like phones, drinks, or magazines, and shows the internal pneumatic rod mechanism. - Enstale Canopy a: Attach the retractable canopy frame and fabric to the daybed. The pneumatic rod system facilitates easy adjustment. Ensure the canopy fabric is securely fastened, often with fixed ropes.
Figure 3: Retractable Canopy. This illustration shows the daybed with its canopy extended for shade and retracted, detailing the pneumatic rod mechanism for smooth adjustment and the fixed ropes used to secure the canopy fabric. - Mete kousen yo: Position the seat and back cushions on the daybed.
Figure 4: Cushions Detail. This image provides a close-up of the daybed's cushions, emphasizing the high-density sponge for comfort and the smooth zippers for easy cover removal and cleaning. - Sere final la: Yon fwa tout konpozan yo an plas epi yo aliyen, sere tout vis ak boulon yo nèt. Pa sere yo twòp.
- Tcheke estabilite: Gently shake the assembled daybed to ensure it is stable and all connections are secure.
Enstriksyon Operasyon
Your COSTWAY Outdoor Daybed is designed for comfortable outdoor relaxation. Here’s how to use its key features:
- Retractable Canopy: To extend the canopy, gently pull it forward. To retract, push it back. The pneumatic rod system will assist in smooth movement. Ensure the canopy is fully extended or retracted and secured with any provided ropes to prevent wind damage.
- Retractable Side Tables: To use a side table, gently pull it outwards until it locks into place. To fold it down, push it inwards. The pneumatic rod will assist in its movement. These tables are designed to hold light items such as drinks, snacks, or small electronic devices.
- Itilizasyon jeneral: The daybed is intended for lounging and relaxation. Avoid standing on it or using it for purposes other than its design.
Antretyen
Proper maintenance will extend the life and appearance of your outdoor daybed.
- Kousen: The cushion covers feature smooth zippers for easy removal. Machine wash covers in cold water with mild detergent and air dry. Always keep cushions dry to prolong their service life. Store cushions indoors during inclement weather or prolonged periods of non-use.
- Rattan: Clean the PE rattan with a soft cloth, mild soap, and water. Rinse thoroughly and allow to air dry. Avoid harsh chemicals or abrasive cleaners.
- Ankadreman metal: The heavy-duty metal frame is rust-resistant. Wipe down with a damp cloth as needed. For stubborn dirt, use mild soap and water. Inspect the frame periodically for any signs of rust or damage and address promptly.
- Twal Canopy: Clean the canopy fabric with a soft brush or cloth and mild soap and water. Ensure it is completely dry before retracting or storing to prevent mildew.
- Swen Jeneral: Periodically check all nuts and bolts and tighten them as necessary to maintain structural integrity.
Depanaj
If you encounter issues with your daybed, refer to the following common solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Kabann nan santi l enstab oswa li tranble. | Fich ki lach; tè inegal. | Ensure all screws and bolts are fully tightened. Move the daybed to a level surface. Adjust non-slip foot pads if applicable. |
| Canopy is difficult to extend or retract. | Pneumatic rod obstruction; mechanism dirty; fabric snagged. | Check for any obstructions around the pneumatic rods. Clean the mechanism. Ensure canopy fabric is not caught. |
| Side tables do not operate smoothly. | Pneumatic rod issue; debris in mechanism. | Inspect the pneumatic rod for damage or obstruction. Clean any debris from the table's sliding mechanism. |
| Cushions appear flattened or worn quickly. | Prolonged exposure to elements; excessive weight. | Store cushions indoors when not in use or during bad weather. Ensure weight capacity is not exceeded. |
Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, tanpri kontakte sèvis kliyan.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Materyèl | PE Rattan, Metal, Sponge, Polyester |
| Dimansyon jeneral | 65" x 60.5" x 58.5" (Length x Width x Height) |
| Seat Cushion Dimension | 58" x 23.5" x 2" (Length x Width x Thickness) |
| Back Cushion Dimension | 16" x 16" x 5" (Length x Width x Thickness) |
| Wotè chèz | 12.5" |
| Kapasite pwa | 800 liv (apeprè 363 kg) |
| Pwa nèt | 57.5 liv (apeprè 26 kg) |
| Asanble obligatwa | Wi |
Enfòmasyon sou Garanti
COSTWAY products are manufactured to high-quality standards and are backed by a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official COSTWAY website for detailed warranty terms and conditions. This warranty typically covers defects in materials and workmanship under normal use.
Sipò pou Kliyan
For assistance with assembly, missing parts, or any other inquiries regarding your COSTWAY Outdoor Daybed, please contact COSTWAY customer service. Contact information can typically be found on the product packaging, the official COSTWAY websit la, oubyen resi acha ou a.
When contacting support, please have your model number ("Outdoor Daybed") and purchase date available to expedite service.
