Manyèl Enstriksyon

Entwodiksyon

Mèsi pou acha aasing the Feit Electric 14-inch Black Rectangular Lantern. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Figi 1: Devan view of the Feit Electric 14-inch Black Rectangular Lantern, showcasing its modern design with a clear glass cylinder and an exposed filament bulb.

Enfòmasyon enpòtan sou sekirite

• Always turn off the power at the circuit breaker or fuse box before beginning installation or performing any maintenance.
• Konsilte yon elektrisyen kalifye si ou pa sèten sou pwosesis enstalasyon an.
• This fixture is designed for outdoor use and is suitable for wet locations.
• Asire w ke tout koneksyon elektrik yo fèt an akò ak kòd ak òdonans lokal yo.
• Pa depase wat espesifye atage for the bulb. This fixture includes an integrated LED bulb.
• Manyen konpozan an vè yo avèk prekosyon pou evite yo kraze.
• Kenbe materyèl anbalaj lwen timoun yo.

Kontni pake

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact Feit Electric customer service for assistance.

Figure 2: The product packaging for the Feit Electric 14-inch Black Rectangular Lantern, showing the lantern inside its box with product details and features.

Typically included components:

• 1 x Lantern Fixture with integrated LED bulb
• 1 x Plak aliye
• 2 x aliye vis
• 3 x Fil nwa
• 1 x Gasket/Seal
• 1 x Manyèl Enstriksyon (dokiman sa a)

Enstalasyon ak Enstalasyon

Anvan ou kòmanse, asire w ou gen zouti sa yo:

• Phillips tèt tournevis
• Flat Tounvis
• Fil retire rad sou ou
• Tep elektrik
• Linèt sekirite
• Eskalye (si sa nesesè)

Etap enstalasyon:

1. Etenn pouvwa: Locate the circuit breaker or fuse box that controls the power to the outdoor light fixture. Turn off the power completely before proceeding. Verify the power is off using a voltage tèsteur.
2. Retire ansyen enstalasyon an (si sa aplikab): Carefully disconnect and remove any existing light fixture from the junction box.
3. Tache Plak Montaj: Secure the mounting plate to the junction box using the provided mounting screws. Ensure the plate is level and firmly attached.
4. Fè koneksyon elektrik:
   • Konekte a nwa fil soti nan aparèy la rive nan la nwa fil (cho) ki soti nan bwat koneksyon an lè l sèvi avèk yon boulon fil.
   • Konekte a blan fil soti nan aparèy la rive nan la blan fil (net) ki nan bwat koneksyon an lè l sèvi avèk yon boulon fil.
   • Konekte a vèt oswa fil kwiv toutouni (tè) ki soti nan aparèy la rive nan vèt or bare copper (ground) wire from the junction box using a wire nut. If no ground wire is available in the junction box, connect to the ground screw on the mounting plate.
   • Ensure all connections are secure and cover wire nuts with electrical tape for added insulation.
5. Monte aparèy la: Carefully align the fixture with the mounting plate. Secure the fixture to the mounting plate using the provided screws, ensuring a snug fit against the wall. If a gasket is provided, place it between the fixture and the mounting surface for a weather-tight seal.
6. Retabli pouvwa: Yon fwa aparèy la byen enstale epi tout koneksyon yo fèt, retabli kouran an nan disjonktè a.

Figure 3: The Feit Electric 14-inch Black Rectangular Lantern installed on the exterior wall of a house during daylight, demonstrating its aesthetic integration.

Enstriksyon Operasyon

This Feit Electric lantern features a built-in Dusk-to-Dawn sensor, allowing for automatic operation.

• Operasyon otomatik: The integrated sensor will detect ambient light levels. The lantern will automatically turn on at dusk and turn off at dawn.
• Sispansyon manyèl (si sa aplikab): If connected to a wall switch, the fixture can be manually turned on or off. For continuous automatic operation, ensure the wall switch remains in the "ON" position.
• Karakteristik dimmable: This fixture is dimmable. Ensure you use a compatible LED dimmer switch for optimal performance. Refer to the dimmer switch manufacturer's instructions for proper installation and operation.

Figure 4: The Feit Electric 14-inch Black Rectangular Lantern illuminated at night on the exterior of a house, showcasing its soft white light output.

Antretyen

The Feit Electric 14-inch Black Rectangular Lantern is designed for minimal maintenance.

• Netwayaj: Pou netwaye aparèy la, asire w ke li koupe kouran an. Sèvi ak yon twal mou.amp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
• Ranplasman anpoul: This fixture features an integrated LED bulb designed for long life. The bulb is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced. Contact Feit Electric customer service for assistance.
• Enspeksyon: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly to ensure safe and proper operation.

Depanaj

Espesifikasyon

Garanti ak sipò

Feit Electric products are manufactured to the highest quality standards. For warranty information, technical support, or to inquire about replacement parts, please contact Feit Electric customer service directly. Please have your model number (B0F8DYQLSF) and purchase date available when contacting support.

Visit the official Feit Electric website for contact details and additional product information: www.feit.com