HTVRONT H17 Phone Case Heat Press Machine User Manual

1. Entwodiksyon

The HTVRONT H17 Phone Case Heat Press Machine is designed for creating custom sublimation transfers on various items, including phone cases, badges, and coasters. This machine utilizes advanced intelligent temperature control and vacuum heat press technology to ensure vibrant, bubble-free, and full-wrap transfers. This manual provides essential information for safe and effective operation of your device.

Image 1.1: The HTVRONT H17 Phone Case Heat Press Machine. This image displays the compact, light blue heat press machine with its handle and control panel visible.

2. Enstriksyon Sekirite Enpòtan

• Li tout enstriksyon yo anvan ou sèvi ak aparèy la.
• Pa manyen sifas cho. Sèvi ak manch oswa bouton.
• Pou pwoteje tèt ou kont chòk elektrik, pa plonje kòd, ploge, oswa aparèy nan dlo oswa nan lòt likid.
• Sipèvizyon sere se nesesè lè nenpòt aparèy itilize pa oswa toupre timoun yo.
• Debranche soti nan priz lè yo pa itilize ak anvan netwaye. Kite refwadi anvan ou mete oswa retire pati yo.
• Pa opere nenpòt aparèy ki gen yon kòd oswa ploge ki domaje oswa apre aparèy la fonksyone mal oswa li te domaje nan nenpòt fason.
• Sèvi ak atachman akseswar ki pa rekòmande pa manifakti aparèy la ka lakòz blesi.
• Pa sèvi ak deyò.
• Pa kite kòd pandye sou kwen tab oswa kontwa, oswa manyen sifas cho.
• Pa mete sou oswa toupre yon gaz cho oswa recho elektrik, oswa nan yon fou chofe.
• Ou dwe pran anpil prekosyon lè w ap deplase yon aparèy ki gen lwil cho oswa lòt likid cho.
• Toujou branche ploge a nan aparèy la an premye, answit branche kòd la nan priz miray la. Pou dekonekte li, vire nenpòt kontwòl sou "off", epi retire ploge a nan priz miray la.
• Pa sèvi ak aparèy pou lòt itilizasyon ki gen entansyon an.

3. Pake kontni

Verifye ke tout atik ki nan lis anba a yo enkli nan pakè ou a:

• HTVRONT H17 Phone Case Heat Press Machine (x1)
• Phone Case Fixture Set (x1)
• Badge Fixture Set (x1)
• Sublimation Film (A4) (x5 sheets)
• Heat-resistant Gloves (x1 pair)
• Sublimation Badges (58 mm) (x3)
• Tweezers (x1)
• Heat-resistant Tape (x1 roll)

Image 3.1: Contents of the HTVRONT H17 Phone Case Heat Press Kit. This image shows the heat press machine along with included accessories: phone case fixture, badge fixture, sublimation film, heat-resistant gloves, blank sublimation badges, tweezers, and heat-resistant tape.

4. Pwodwi souview

The HTVRONT H17 features a user-friendly design with intuitive controls for temperature and time. Its compact size and lightweight construction make it suitable for various crafting environments. The vacuum technology ensures even pressure and full-surface sublimation for professional results.

Image 4.1: Open view of the HTVRONT H17 Heat Press Machine. This image shows the machine with its lid open, revealing the heating plate and the pressing area.

Karakteristik kle:

• 3D Full-Wrap Vacuum Heat Press: Achieves vibrant, bubble-free transfers that wrap around curves and edges.
• Kontwòl Tanperati egzak: Adjustable from 100°C to 180°C (212°F to 356°F) with fine increments.
• Anviwònman tan reglabl: Transfer time can be set from 1 to 600 seconds.
• Universal Adjustable Fixtures: Compatible with various iPhone models (iPhone 12 and above) and Android models (Samsung, Xiaomi, Google, Huawei, etc.) using included fixtures.
• Integrated Design Software Support: Works with IS software for pattern adjustment, mirroring, and outputting sublimation-ready files.
• Operasyon trankil: Operates at less than 65 dB.
• Lejè ak kontra enfòmèl ant: Weighs approximately 5.3 kg (11 pounds).

5. Enstalasyon

5.1 Debale ak Plasman

1. Carefully remove the heat press machine and all accessories from the packaging.
2. Place the machine on a stable, flat, and heat-resistant surface. Ensure adequate ventilation around the machine.
3. Keep the machine away from flammable materials and out of reach of children.

5.2 Koneksyon pouvwa

1. Ensure the machine's power switch is in the "OFF" position.
2. Connect the power cord to the machine's power input.
3. Ploge lòt pwent fil kouran an nan yon priz elektrik ki chita.

6. Operasyon Enstriksyon

6.1 Etap Operasyon Debaz yo

Follow these general steps for sublimation transfer:

1. Power On and Set Parameters: Turn on the machine. Use the control panel to set the desired temperature and time according to the material being pressed. Short presses adjust by 5 units, long presses by 10 units.
2. Preheat and Mount Item: Place the appropriate fixture (e.g., phone case fixture) into the machine. Allow the machine to preheat. Once preheated, mount your item (e.g., phone case) onto the fixture.
3. Position Sublimation Film: Place the printed sublimation film onto the item. Ensure the matte side of the film is facing the print side of the item. Secure with heat-resistant tape if necessary.
4. Start Transfer: Close the lid and initiate the heat press process. The machine will apply heat and vacuum pressure.
5. Retire fim nan: Once the transfer is complete and the machine signals, carefully open the lid (using heat-resistant gloves). Peel off the sublimation film while the item is still hot for best results.

Image 6.1: Visual guide for the 6-minute heat press process. This image illustrates the four key steps: powering on and setting parameters, preheating and mounting the item, positioning the sublimation film, and peeling the film after transfer.

6.2 Temperature and Time Reference Chart

Refer to the following chart for recommended settings. Adjustments may be necessary based on specific materials and desired results.

Image 6.2: Quick Reference Chart for various substrates. This chart provides recommended upper heat plate temperature, lower heat plate temperature, preheat time, transfer time, and peeling method for phone cases, badges, ceramic plates, coasters, and keychains.

6.3 Using Fixtures and Compatibility

The machine includes adjustable fixtures for various items. The phone case fixture is designed to accommodate most popular phone models.

Image 6.3: The HTVRONT H17 machine with a phone case fixture, demonstrating compatibility with various popular phone models.

For iPhone models, the fixture is compatible with iPhone 12 and above. Android molds are compatible with Samsung, Xiaomi, Google, Huawei, and other brands. The adjustable design minimizes the need for multiple specific molds.

Imaj 6.4: Detaye view of the phone case fixture components, including the main fixture, lens pads, and filler blocks for universal adaptation.

Image 6.5: Model Compatibility Chart. This chart lists various iPhone models and the corresponding lens pad and filler block combinations to use with the phone case fixture.

6.4 Design Software Integration

The HTVRONT H17 supports the use of the IS software, which provides a mobile model library and tools for precise design preparation.

• Adjust pattern size and position within templates.
• Perform mirror processing for sublimation.
• Output sublimation-ready files to ensure accurate pressing without offset or cutting errors.

Image 6.6: Screenshot of the design software interface demonstrating smart alignment features for phone case designs.

7. Antretyen

7.1 Netwaye machin nan

1. Ensure the machine is unplugged and completely cooled down before cleaning.
2. Siye sifas eksteryè yo ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
3. Gently clean the heating plates with a soft, dry cloth. Avoid scratching the surface.
4. Remove any debris or residue from the vacuum area.

7.2 Depo

Store the machine in a dry, cool place, away from direct sunlight and moisture. Keep it covered to prevent dust accumulation.

NAN. Depanaj

9. Espesifikasyon

10. Garanti ak sipò

10.1 Enfòmasyon sou Garanti

HTVRONT is committed to providing quality products. For specific warranty details, please refer to the warranty card included with your product or visit the official HTVRONT websit la. Kenbe resi acha ou kòm prèv acha pou reklamasyon garanti.

10.2 Sipò pou Kliyan

If you encounter any issues or have questions regarding your HTVRONT H17 Phone Case Heat Press Machine, please contact our customer support team. We offer excellent after-sales service to assist you.

• Gid itilizatè sou entènèt: A detailed PDF user guide is available for download: Telechaje Gid Itilizatè a (PDF)
• Enfòmasyon pou kontakte: Please refer to the contact details provided on the HTVRONT official websit entènèt la oswa anbalaj pwodwi ou a pou jwenn chanèl sipò ki pi ajou yo.