WUBEN PL01 Pen Light Instruction Manual

1. Entwodiksyon

The WUBEN PL01 is a compact, high-performance pen light designed for various applications including home use, outdoor activities, emergencies, and inspections. It features a bright 650-lumen output, dual power options (rechargeable battery or AAA batteries), IP68 waterproof rating, and a durable aluminum alloy construction. This manual provides detailed instructions for its safe and effective use.

Image 1.1: The WUBEN PL01 Pen Light, showcasing konsepsyon elegant li yo ak gwosè kontra enfòmèl ant li yo.

2. Ki sa ki nan bwat la

Tanpri verifye ke tout atik yo prezan lè w ap ouvri pake a:

• WUBEN PL01 Pen Light x 1
• Rechargeable Battery (pre-installed or separate) x 1
• Kalite-C Chaje Kab x 1
• Lanyard x 1
• 2 bag O-ring rezèv
• Manyèl Itilizatè (dokiman sa a) x 1

Image 2.1: Contents of the WUBEN PL01 package, including the pen light, charging cable, lanyard, and spare O-rings.

3. Enstalasyon

3.1 Enstalasyon batri

The WUBEN PL01 supports two power sources: the included rechargeable battery or two standard AAA batteries (not included). Ensure correct polarity during installation.

1. Devise bouchon ke flach la.
2. Insert the rechargeable battery or two AAA batteries with the positive (+) end facing towards the head of the flashlight.
3. Securely re-screw the tail cap until it is fully tightened.

Image 3.1: Illustration of the dual power options for the WUBEN PL01, showing both the rechargeable battery and AAA battery configuration.

3.2 Chaje batri rechargeable a

The included rechargeable battery features a built-in USB-C charging port. The flashlight itself does not have an integrated charging port.

1. Unscrew the tail cap and remove the rechargeable battery from the flashlight.
2. Connect the provided USB-C charging cable directly to the charging port on the battery.
3. Konekte lòt bout kab USB-C a ak yon sous kouran USB konpatib (pa egzanp, yon adaptè miray, yon pò USB òdinatè).
4. A red indicator light on the battery signifies that it is charging.
5. Limyè endikatè a ap vire vèt lè batri a konplètman chaje.
6. Chaje pran apeprè 1.5 èdtan anjeneral.
7. Once charged, reinsert the battery into the flashlight and secure the tail cap.

4. Operasyon Enstriksyon

4.1 Power On/Off

To turn the WUBEN PL01 on or off, perform a full press of the tail switch button.

4.2 Chanje mòd

With the light turned on, half-press the tail switch button to cycle through the available brightness modes in the following sequence:

• Lalin: 1 Lumen
• Ba: 50 Lumen
• Mwayen: 150 Lumen
• Segondè: 650 Lumen

The flashlight features a mode memory function, meaning it will activate in the last used brightness mode when turned on again.

Image 4.1: Diagram illustrating the tail switch operation for power on/off and mode cycling.

Imaj 4.2: Egzanpamples of the WUBEN PL01's four brightness modes in various practical scenarios, from facial examination to night walking.

4.3 Dual-Direction Clip Usage

The WUBEN PL01 is equipped with a versatile two-way clip, allowing for secure attachment to various items for hands-free lighting.

• Pocket Carry: Attach the clip to a shirt pocket or pants pocket for easy access.
• Backpack Strap: Secure the flashlight to a backpack strap for illumination during hikes or walks.
• Cap Mount: Clip the flashlight to the brim of a cap to convert it into a temporary headlamp.

Image 4.3: Demonstrates the versatility of the dual-direction clip, showing the flashlight attached to a pocket, backpack strap, and cap.

5. Antretyen

5.1 Netwayaj

Pou kenbe pèfòmans ak aparans optimal:

• Netwaye kò flach la avèk yon twal mou,amp twal. Evite pwodui chimik ki agresif oswa materyèl abrazif.
• For the lens, use a clean, soft cloth specifically designed for optical surfaces.

5.2 O-ring Replacement

The PL01's IP68 waterproof rating relies on properly sealed O-rings. Periodically inspect them for any signs of wear, cracks, or damage.

• If O-rings appear damaged, replace them with the provided spare O-rings.
• Apply a thin layer of silicone grease to the O-rings to ensure a better seal and prevent drying.

5.3 Swen Batri

• If the flashlight will not be used for an extended period, remove the batteries to prevent potential leakage and damage.
• For the rechargeable battery, recharge it every 3-6 months to maintain its overall lifespan and capacity.

Image 5.1: The WUBEN PL01's Type III hard-anodized aluminum body, highlighting its scratch, rust, and impact resistance.

Image 5.2: The WUBEN PL01 demonstrating its IP68 waterproof and 2-meter impact resistance, suitable for demanding environments.

NAN. Depanaj

If you encounter issues with your WUBEN PL01, please refer to the following common problems and solutions:

• Limyè pa limen:
  • Ensure the batteries are installed with correct polarity.
  • Check if the rechargeable battery is charged, or if AAA batteries are new.
  • Verify that the tail cap is fully tightened. A loose tail cap can prevent electrical contact.
  • Clean the battery contacts and the contact points inside the flashlight with a clean cloth.
• Limyè a tranble oswa diminye sanzatann:
  • The battery level may be low. Recharge the included battery or replace AAA batteries.
  • Ensure the tail cap is securely tightened.
  • Clean battery contacts and internal contact points.
• Water ingress (if exposed to water):
  • Immediately turn off the flashlight and remove the batteries.
  • Inspect the O-rings for any damage, tears, or improper seating. Replace if necessary.
  • Ensure the tail cap was fully tightened before exposure to water.
  • Allow the flashlight to dry completely before reassembling and attempting to use it.

If the problem persists after attempting these solutions, please contact WUBEN customer support.

7. Espesifikasyon

Image 7.1: Diagram illustrating the internal components of the WUBEN PL01, focusing on the 315D LED emitter and optical system.

8. Enfòmasyon sou Garanti

WUBEN products typically come with a manufacturer's warranty. For specific warranty terms, conditions, and registration details, please refer to the official WUBEN websit la oubyen kontakte sèvis kliyan yo. Kenbe resi acha w la kòm prèv acha pou nenpòt reklamasyon garanti.

9. Sipò pou Kliyan

For further assistance, product inquiries, or technical support, please visit the official WUBEN website or contact their customer service department. You can often find FAQs, troubleshooting guides, and contact information on their websit.

Official WUBEN Store: WUBEN Store on Amazon