GTRACING L-CH510 Big and Tall Gaming/Office Chair Instruction Manual

Entwodiksyon

This manual provides detailed instructions for the assembly, operation, and maintenance of your GTRACING L-CH510 Big and Tall Gaming/Office Chair. Designed for users up to 400 lbs, this chair features an ergonomic design with a pocket spring cushion, high back lumbar support, and a retractable footrest for enhanced comfort during extended use. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your chair.

Figure 1: GTRACING L-CH510 Big and Tall Gaming/Office Chair (Ergo-black)

Enfòmasyon sou Sekirite

• Toujou rasanble chèz la dapre enstriksyon yo bay la.
• Pa depase kapasite maksimòm pwa 400 liv.
• Be cautious when adjusting the chair's position to avoid injury.
• Keep the chair away from heat sources to prevent damage to the material.
• Asire w ke tout boulon ak vis yo byen sere anvan w itilize yo epi tcheke detanzantan pou wè si yo lach.
• Evite kanpe sou chèz la oubyen sèvi avè l kòm yon ti mach eskalye.

Enstalasyon ak Asanble

Assembly of the GTRACING L-CH510 chair is straightforward and typically takes between 15-30 minutes. All necessary hardware and tools are included in the package. Follow the step-by-step instructions provided in the separate assembly guide for detailed visual assistance.

1. Depake tout konpozan yo epi verifye yo avèk lis pyès yo.
2. Mete wou yo sou baz chèz la.
3. Mete asansè gaz la nan sant baz la.
4. Asanble konpozan chèz la ak dosye a.
5. Tache akoudwar yo sou chèz la.
6. Connect the assembled seat/backrest to the gas lift.
7. Attach the lumbar pillow and headrest pillow as desired.

Figure 2: Chair Components and Assembly Overview

Enstriksyon Operasyon

Ajisteman chèz:

• Ajisteman wotè: Use the lever located under the right side of the seat to raise or lower the chair to your desired height. Pull the lever up while seated to lower, or pull up while standing to raise.
• Backrest Recline (90° to 150°): The backrest can be reclined from 90 degrees (upright) to 150 degrees (nearly flat). Use the lever on the left side of the seat to adjust the recline angle. Release the lever to lock the backrest in position.
• Repoze pye ki ka retire: Pull the footrest out from under the seat when you wish to extend your legs. Push it back in when not in use.
• Akoudwar reglabl: The armrests are height-adjustable. Locate the button or lever on the side of each armrest to adjust their height.
• Fonksyon Swivel: The chair features a 360-degree swivel for easy movement and access to your workspace.

Figure 3: Backrest Recline and Support Zones

Figure 4: Adjustable Padded Armrests

Karakteristik konfò:

• Pocket Spring Cushion: The dual-layer high-density sponge with built-in pocket springs provides segmented support, effectively relieving fatigue and pain in the lumbar spine and hip.
• Sipò lonbèr: The ergonomic backrest and included throw pillow offer targeted lumbar support for lower back pain relief. The throw pillow can be adjusted to your preferred position.
• Deluxe PU Leather: The chair is upholstered in soft faux leather, which is breathable, durable, scratch-resistant, pet-friendly, and easy to clean.

Figure 5: Pocket Spring Cushion for Enhanced Comfort

Antretyen

• Netwayaj: Siye pwòp ak anonsamp twal. Evite pwodui chimik ki agresif oswa pwodui netwayaj abrazif ki ka domaje kwi PU a.
• Tèks regilye: Periodically inspect all screws and bolts to ensure they are tight. Re-tighten as necessary to maintain stability and safety.
• Swen Roulèt: Kenbe wou yo pwòp san cheve ak debri pou asire yo deplase san pwoblèm.
• Swen kwi: For best results, condition the PU leather periodically with a suitable leather conditioner to prevent drying and cracking.

Depanaj

• Chèz la ap koule oswa li pa ajiste wotè li: Asire w levye asansè gaz la byen angaje. Si pwoblèm nan pèsiste, ou ka bezwen ranplase asansè gaz la.
• Chèz la pa ka panche: Check that the recline lever is properly engaged and not obstructed.
• Bri k'ap kriye: Tighten all screws and bolts. Applying a small amount of lubricant to moving parts (e.g., gas lift, recline mechanism) may also help.
• Stiff Caster Movement: Clean any debris from the casters. Consider replacing casters if they remain stiff or damaged.

Espesifikasyon

Figure 6: Detailed Chair Dimensions

Garanti ak sipò

GTRACING is committed to customer satisfaction. Your chair comes with a worry-free purchase guarantee. If you have any questions about your GTRACING L-CH510 chair, including assembly, operation, or any issues, please do not hesitate to reach out to our customer support team. Contact information can typically be found on the product packaging or the official GTRACING website. We are dedicated to providing excellent assistance and support.