1. Entwodiksyon
The M5Stack M5StickC PLUS2 is a compact, versatile IoT development kit powered by the ESP32-PICO-V3-02 chip. It integrates essential components such as a 1.14-inch TFT display, IMU, IR emitter, RTC, microphone, buzzer, and programmable buttons, making it suitable for rapid prototyping, wearable devices, smart home applications, and STEM education.
Figi 1: Devan view of the M5Stack M5StickC PLUS2 device.
2. Pwodwi souview ak Konpozan
2.1 Karakteristik kle
- Powerful ESP32 Chip & Wi-Fi: Features ESP32-PICO-V3-02 dual-core 240MHz with 2MB PSRAM and 8MB Flash for efficient processing and stable wireless connectivity.
- All-in-One Compact Design: Integrates IMU, IR emitter, RTC, microphone, buzzer, buttons, and a 1.14-inch TFT display within a 48×24×13.5mm form factor.
- Batri 200mAh amelyore: Built-in rechargeable Li-ion battery for extended operation.
- Devlopman Milti-Platfòm: Compatible with UiFlow1/UiFlow2, Arduino IDE, ESP-IDF, and PlatformIO.
- Expansion & Versatile Applications: Supports HAT and Unit series modules via an expansion connector, suitable for STEM education, smart home devices, and DIY IoT projects.
Figure 2: Summary of M5StickC PLUS2 key features including battery, buzzer, and expansion capabilities.
2.2 Idantifikasyon konpozan
Familiarize yourself with the various components and interfaces of the M5StickC PLUS2:
Figure 3: Detailed diagram identifying buttons, ports, and internal components of the M5StickC PLUS2.
- Buttons A, B, C: User-programmable input buttons. Button C also functions as the power switch (press for 6 seconds to turn off).
- USB-C pò: Used for charging the device and programming/data transfer.
- HY2.0-4P Connector: Expansion port for connecting M5Stack Unit series modules.
- Ekran TFT 1.14 pous: Color LCD for visual output.
- IR Emitter (G19): Infrared transmitter for control applications.
- LED (G19): Endikatè estati ki ap dirije.
- Microphone (SPM1423): Pou opinyon odyo.
- Buzzer (G2): Pou fidbak odyo.
- External 8-Pin Connector: Provides access to GPIO pins (GND, 5V, G26, G36/G25, G0, BAT, 3V3, 5V).
Figi 4: Top view of the M5StickC PLUS2 showing the pinout for the external 8-pin connector.
Figi 5: Close-up view of the USB-C port and HY2.0-4P expansion connector.
3. Enstalasyon ak Kòmanse
3.1 Premye Limen ak Chaje
To power on the M5StickC PLUS2, press the side button (Button C) briefly. To turn off, press and hold Button C for approximately 6 seconds. Charge the device using the USB-C port and a standard 5V USB power adapter. The built-in 200mAh battery provides portable power.
3.2 Enstalasyon Anviwònman Devlopman an
The M5StickC PLUS2 supports multiple development platforms. For detailed instructions on setting up your preferred environment (UiFlow, Arduino IDE, ESP-IDF, PlatformIO), please refer to the official M5Stack documentation websit.
Figure 6: Steps to access tutorials and documentation on the M5Stack websit.
- Vizite m5stack.com.
- Click on "DOCUMENT".
- Chèche pou your product (M5StickC PLUS2).
- Scroll down and find the "Learn" section for guides and examples.
4. Operasyon
4.1 Entèraksyon debaz
The M5StickC PLUS2 features a 1.14-inch TFT display for visual feedback and three programmable buttons (A, B, C) for user input. The specific functions of these buttons and the display content will depend on the firmware loaded onto the device.
4.2 Programming and Applications
The M5StickC PLUS2 is designed for a wide range of IoT and embedded applications. Its Wi-Fi capabilities enable network connectivity, while the IR emitter allows for remote control functionalities. The integrated IMU (MPU6886) provides motion sensing for various projects. Detailed programming examples and application guides are available on the M5Stack documentation portal.
Figi 7: Egzamples of M5StickC PLUS2 applications, including smart home devices, DIY projects, STEM education, and wearable devices.
Figure 8: The M5StickC PLUS2 configured as a wearable device.
5. Espesifikasyon
The following table details the technical specifications of the M5Stack M5StickC PLUS2:
Figure 9: Visual representation of M5StickC PLUS2 specifications.
| Spesifikasyon | Paramèt |
|---|---|
| SoC | ESP32-PICO-V3-02 dual core, 240MHz, supports Wi-Fi |
| PSRAM | 2 MB |
| Flash | 8 MB |
| Antre Voltage | 5V @ 500mA |
| Entèfas | Type-C x 1, GROVE (I2C+I/O+UART) x 1 |
| Ekran LCD | 1.14 inch, 135*240 Colorful TFT LCD, ST7789v2 |
| Mikwofòn | SPM1423 |
| Bouton | Custom buttons x 3 |
| RAM | PSRAM |
| Sistèm operasyon | FreeRTOS |
| Pwa atik | 0.634 ons |
| Dimansyon pake | 4.25 x 2.4 x 0.55 pous |
| Mak processeur | Espressif |
| Kantite processeurs | 2 |
| Batri | 1 pil ki pa estanda obligatwa (enkli) |
| Koneksyon Teknoloji | Enfrawouj, Wi-Fi |
5.1 Dimansyon fizik ak pwa
Figure 10: Dimensions of the M5StickC PLUS2 (48mm x 24mm x 13.5mm).
Figure 11: The M5StickC PLUS2 device weighing 16.7 grams.
6. Antretyen
To ensure the longevity and proper functioning of your M5StickC PLUS2, follow these general maintenance guidelines:
- Kenbe aparèy la pwòp epi san pousyè ak debri. Sèvi ak yon twal mou epi sèk pou netwaye.
- Evite ekspoze aparèy la nan tanperati ekstrèm, imidite, oswa limyè solèy la dirèk.
- Pa plonje aparèy la nan dlo oswa nan lòt likid.
- Handle with care to prevent physical damage to the screen or connectors.
- Charge the device regularly, especially if it will be stored for an extended period, to maintain battery health.
NAN. Depanaj
This section addresses common issues you might encounter with your M5StickC PLUS2.
Figure 12: Frequently Asked Questions and troubleshooting steps.
Q1: Why is my StickC/CPlus/CPlus2 black screen/won't boot/can't burn firmware/can't connect to my computer?
Tanpri swiv enstriksyon sa yo:
- Observe whether there are any obvious physical damage marks on the device.
- Install the device driver:
- Windows: CH9102_VCP_SER_Windows.exe
- MacOS: CH9102_VCP_MacOS_v1.7.zip
- Connect the device using a USB cable and open the device manager. Check whether the device manager page refreshes when the device is inserted, and whether a new device appears in Universal Serial Bus controllers. If not:
- If you are using USB Type-C to Type-C cable: First disconnect the StickCPlus2, turn off the device, and then plug in the cable (press and hold the power button until the green light turns on to indicate that it is turned off). Or replace it with an A to C cable.
- If you are using USB A to C cable: "Try to change the data cable", "Try to reinstall the driver", "Try to change the PC".
- Reburn the factory firmware: docs.m5stack.com/en/guide/restore_factory/m5stickc_plus2
- The screen is still black after burning:
- Press and hold the leftmost button until the green light inside turns on, then plug in the USB cable.
- Observe whether the screen is black but has a faint backlight, and whether there is a beep sound when pressing the button.
Q2: A fatal error occurred: failed to connect to esp32: wrong boot mode detected (0xb)!: the chip needs to be in download mode.
Use a DuPont cable to connect GPIO0 and GND on the top of StickCPlus2 in the off state, then plug it into the computer, unplug the DuPont and try burning again.
8. Lis Shipping
The M5Stack M5StickC PLUS2 package includes the following items:
Figure 13: Contents of the M5StickC PLUS2 package.
- M5StickC PLUS2 x 1
9. Sipò ak Garanti
For further technical support, detailed documentation, community forums, and warranty information, please visit the official M5Stack websit:
M5Stack is committed to providing comprehensive resources for developers and users. Please refer to the website for the most up-to-date information regarding product support and warranty policies.
