HTVRONT 15x15 Swing-Away Heat Press Machine User Manual

1. Enstriksyon Sekirite Enpòtan

Please read all safety instructions carefully before operating the HTVRONT Heat Press Machine. Failure to follow these instructions may result in injury or damage to the product.

• Sifas cho: The heating plate reaches high temperatures. Avoid direct contact with the heating plate during operation and cool-down. Use the handle for opening and closing.
• Prevansyon boule: The 180° swing-away design helps reduce the risk of burns by moving the hot plate away from your workspace. Always utilize this feature when placing or removing materials.
• Sekirite elektrik: Asire w machin nan konekte ak yon priz kouran ki gen tè ​​epi ki gen vòltaj ki kòrèk la.tage (110 Volts). Do not operate with damaged cords or plugs. Unplug the machine when not in use or before cleaning.
• Pwoteksyon Surchof: The machine features a special plastic casing designed to prevent the surface from overheating. However, exercise caution.
• Independent Control Panel: The control panel is connected via a 1-meter cable, allowing you to operate settings at a safe distance from the hot plate.
• Otomatik fèmen: For enhanced safety, the heat press will automatically shut off after 15 minutes of inactivity.
• Timoun ak bèt kay: Keep the heat press machine out of reach of children and pets.
• Vantilasyon: Opere machin nan nan yon zòn ki byen vantile.

2. Pwodwi souview

2.1 Eleman ak Karakteristik

The HTVRONT Heat Press Machine is designed for efficient and precise heat transfer projects. Familiarize yourself with its main components:

Image: The HTVRONT 15x15 Swing-Away Heat Press Machine, showcasing its main unit and detached control pad.

Image: A detailed diagram illustrating the various parts of the heat press machine, including the comfortable handle, pressure regulator, wire protective tube, swivel heat plate, ironing board, metal base, and control pad.

• Manch konfòtab: Ergonomically designed for easy operation.
• Presyon regilatè: Knob for adjusting the pressing pressure.
• Wire Protective Tube: Houses and protects internal wiring.
• Swivel Heat Plate: The upper heating element that rotates 180 degrees for safe material placement.
• Ironing Board (Lower Platen): The base where materials are placed for pressing.
• Baz metal: Provides stability for the machine.
• Pad kontwòl: Detached unit for setting temperature and time.

2.2 What's Included in the Box

Image: An illustration showing the items included in the product packaging: the manual heat press unit, control pad, heat insulation pad, and user manual.

• HTVRONT Manual Heat Press x 1
• Kontwòl Pad x 1
• Heat Insulation Pad x 1
• Manyèl itilizatè x 1

3. Inisyal Enstalasyon

1. Dekonpoze: Ak anpil atansyon retire tout eleman nan anbalaj la.
2. Plasman: Place the heat press machine on a stable, heat-resistant surface in a well-ventilated area. Ensure there is enough space around the machine for the swing-away function.
3. Connect Control Pad: Plug the control pad cable into the designated port on the heat press machine.
4. Koneksyon pouvwa: Branche kòd kouran an nan yon priz elektrik 110V ki gen koneksyon ak tè.
5. Pre-use Check: Before first use, ensure all parts are securely assembled and there are no visible damages.

4. Operasyon

4.1 Temperature and Time Settings

The detached control pad allows for precise adjustment of temperature and time.

Image: The control pad displaying temperature and time settings, with indicators for bell reminder and temperature range.

• Pouvwa sou: Press the power button on the control pad to turn on the machine.
• Mete Tanperati: Use the temperature adjustment knob/buttons on the control pad to set the desired temperature. The machine supports a range of 104-410°F (40-210°C).
• Mete tan: Use the time adjustment knob/buttons to set the desired pressing duration (0-999 seconds).
• Prechofaj: The machine will begin to heat up once settings are applied. The 1500W dual-zone heating engine ensures rapid and even heat distribution. A bell reminder will sound when the set temperature is reached.

4.2 Ajisteman Presyon

The pressure adjustment knob located on top of the heat press allows you to customize the pressure based on the thickness of your material.

• Increase Pressure: Vire bouton an nan goch.
• Decrease Pressure: Turn the knob counter-clockwise.
• Adjust until the heat plate makes firm, even contact with your material.

4.3 The Pressing Process

Follow these steps for a successful heat transfer:

Image: A visual guide showing the four main steps of operation: 1. Prepare materials, 2. Set time and temperature on the control pad, 3. Adjust pressure, 4. Press the handle down to start the transfer.

1. Prepare: Place your material (e.g., T-shirt) and the transfer design onto the ironing board. Ensure the material is flat and free of wrinkles. You may use the included heat insulation pad.
2. Mete: Use the control pad to set the appropriate temperature and time for your specific transfer material (HTV, sublimation, etc.). Allow the machine to preheat until the set temperature is reached.
3. Ajiste: Rotate the swivel heat plate 180 degrees to move it away from the ironing board. Adjust the pressure regulator knob to achieve the desired pressure for your material.
4. Peze: Once the machine is preheated and the pressure is set, swing the heat plate back over your material. Firmly press the handle down to engage the heat plate. The handle will self-lock during heating, allowing you to release it and perform other tasks.
5. Dekont: The timer on the control pad will begin counting down. A bell reminder will sound when the pressing cycle is complete.
6. Fini: Lift the handle to release the pressure, then swing the heat plate away. Carefully remove your pressed item.

4.4 Automatic Shut-off Feature

The HTVRONT Heat Press Machine is equipped with an automatic shut-off feature. If the machine remains inactive for 15 minutes, it will automatically power down to conserve energy and enhance safety.

5. Antretyen

Bon antretyen asire lonjevite ak pèfòmans optimal machin près chalè ou a.

• Netwayaj Plak Chalè a: Allow the machine to cool completely. Use a soft, damp cloth to wipe down the heat plate. For stubborn residue, use a non-abrasive cleaner specifically designed for heat press platens. Do not use harsh chemicals or abrasive materials.
• Netwaye kò a: Siye deyò machin nan avèk yon twal mou epi sèk.
• Depo: Sere près chalè a nan yon anviwònman sèk epi san pousyè lè w pa ap itilize li.
• Tèks regilye: Periodically inspect the power cord and plug for any signs of damage.

NAN. Depanaj

If you encounter issues with your HTVRONT Heat Press Machine, refer to the following common problems and solutions:

• Machin pa limen:
  • Asire w ke kòd kouran an byen branche nan machin nan ak nan yon priz elektrik ki fonksyone.
  • Tcheke si priz la gen kouran lè w branche yon lòt aparèy.
• Chofaj inegal:
  • While the machine is designed for even heat distribution, ensure the heat plate is clean and free of debris.
  • Verify that the pressure is evenly applied across the entire platen. Adjust the pressure knob as needed.
• Timer Issues (e.g., not resetting or starting):
  • Ensure the control pad cable is firmly connected.
  • Try powering off the machine and restarting it.
  • Refer to the specific instructions in the included user manual for detailed control pad operation.
• Transfè a pa kole byen:
  • Check that the temperature and time settings are correct for your specific transfer material.
  • Ensure sufficient and even pressure is applied.
  • Verify that the material and transfer are properly prepared (e.g., pre-pressed fabric, correct peeling method).

For further assistance, please contact HTVRONT customer support.

7. Espesifikasyon teknik

8. Sipò Kliyan ak Garanti

For any questions, technical support, or warranty inquiries regarding your HTVRONT Heat Press Machine, please contact HTVRONT customer service through the official websit entènèt la oswa platfòm acha ou a.

Tanpri kenbe prèv ou achte pou reklamasyon garanti.