GDFStudio Full Size Floor Platform Bed with Fence and Door - Instruction Manual

1. Entwodiksyon

Thank you for choosing the GDFStudio Full Size Floor Platform Bed with Fence and Door. This manual provides detailed instructions for the assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Enfòmasyon sou Sekirite

• Granmoun asanble obligatwa: This product must be assembled by adults. Keep children away during assembly.
• Li Enstriksyon: Ensure all instructions are read and understood before assembly and use.
• Tcheke tout pati yo: Verify that all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Itilize sou sifas plat: Assemble and use the bed on a flat, stable, and level surface to prevent tipping.
• Sere boulon Fastener: Periodically check and tighten all fasteners to ensure the bed remains stable. Do not overtighten.
• Limit pwa: Do not exceed the recommended weight limit for a full-size bed frame.
• Pa bezwen somye bwat: This platform bed is designed for use without a box spring. Using a box spring may raise the mattress height excessively.

3. Pake kontni

Before assembly, please ensure all components listed below are present in your package. If any parts are missing or damaged, please contact customer support.

Image: Detailed diagram illustrating all components and their respective dimensions for the bed frame.

Lis konpozan:

• Headboard/Footboard Panels
• Side Rails with Fence
• Panèl pòt la
• Planch Sipò
• Pye Sipò Santral (si sa aplikab)
• Pakè pyès ki nan konpitè (vis, boulon, kle Allen)
• Manyèl Enstriksyon

4. Enstalasyon ak Asanble

Follow these steps carefully for a smooth assembly process. It is recommended to assemble the bed with two adults.

1. Depake konpozan: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (like a carpet) to prevent scratches.
2. Rasanble ray bò yo: Attach the side rails to the headboard and footboard panels using the provided hardware. Ensure all connections are secure but do not fully tighten until the frame is complete.
3. Enstale Pòt la: Attach the door panel to the designated opening on the side rail using the hinges and latch provided. Ensure the door swings freely and latches securely.


Image: Detail of the door's hinge and latch for secure closure.

4. Mete planch sipò yo: Lay the wooden support slats across the bed frame. Ensure they are evenly spaced and secured to the side rails as per the instructions. These slats provide mattress support and eliminate the need for a box spring.


Imaj: View of the sturdy wooden slats providing mattress support.

5. Sere final la: Once all parts are assembled, go back and fully tighten all screws and bolts. Do not overtighten to avoid damaging the wood.
6. Pozisyon Kabann: Deplase ankadreman kabann lan avèk prekosyon nan plas ou vle a.

5. Operasyon Enstriksyon

This floor platform bed is designed for direct mattress placement. No box spring is required. The integrated fence and door provide a secure and enclosed sleeping area.

• Plasman Matla: Place your full-size mattress directly onto the wooden support slats.
• Fonksyonalite Pòt: The small door allows for easy entry and exit. Ensure the latch is properly engaged when the door is closed to keep it secure.
• Low Profile Konsepsyon: The low height of the bed makes it easily accessible.

Image: The assembled bed frame with a mattress and decorative items, showcasing li gen yon nivo pwoteksyon ki bafile design and fence.

6. Antretyen

• Netwayaj: Siye ankadreman an bwa a ak yon twal mou,amp twal. Evite pwodui chimik ki agresif oswa pwodui netwayaj abrazif ki ka domaje fini an.
• Enspeksyon regilye: Tcheke tout boulon ak vis yo detanzantan pou asire yo byen sere. Sere yo ankò si sa nesesè.
• Evite imidite: Keep the bed away from excessive moisture or direct sunlight to prevent warping or fading of the wood.

NAN. Depanaj

Pwoblèm komen ak solisyon:

• Kabann nan santi l ap tranble: Ensure all bolts and screws are fully tightened. Check that the bed is on a level surface.
• Slats are not fitting: Double-check that the side rails are correctly installed and that the slats are oriented properly.
• Pòt la pa fèmen byen: Inspect hinges and latch for any obstructions or misalignment. Adjust if needed.

8. Espesifikasyon

9. Garanti ak sipò

GDFStudio products are manufactured with quality and care. For any questions regarding assembly, missing parts, or product defects, please contact GDFStudio customer support. Please have your model number (326331W) and purchase information ready when contacting support.

For specific warranty details, please refer to the documentation provided at the time of purchase or visit the official GDFStudio websit.