DIGITEN THT1032 Temperature and Humidity Controller with Timer User Manual

1. Entwodiksyon

The DIGITEN THT1032 is a versatile temperature and humidity controller designed for precise environmental management. It features three independent outlets for controlling heating/cooling, humidification/dehumidification, and timed operations. Equipped with dual high-precision probes, this device is suitable for various applications including reptile enclosures, mushroom cultivation, plant seeding, and home brewing.

2. Karakteristik kle

• Operasyon Konekte epi Jwe: Simple setup with intuitive buttons for quick configuration.
• Dual High-Precision Probes: Separate probes for temperature (accuracy: ±0.4°C/±0.7°F) and humidity (accuracy: ±3%).
• Triple-Zone Precision Control: Three independent outlets for temperature, humidity, and timed devices.
• Gwo ekspozisyon LCD: Clear, real-time monitoring with switchable Fahrenheit/Celsius units.
• Climate Customization: Combine heating/cooling with humidification/dehumidification, and program the third outlet for timers.

3. Pake kontni

• DIGITEN THT1032 Controller Unit
• Sonde Tanperati
• Sonde imidite
• Manyèl itilizatè

4. Pwodwi souview

The DIGITEN THT1032 controller features a main unit with a large LCD display, control buttons, three power outlets, and two external probes for temperature and humidity sensing.

Imaj 1: Devan view of the DIGITEN THT1032 controller, showing the display, buttons, and three power outlets.

4.1. Kontwòl Panel ak Display

The front panel includes an LCD screen and four control buttons: SET, MODE, Up (▲), and Down (▼).

Imaj 2: Detaye view of the controller's outlets and control buttons. OUT1 is for temperature, OUT2 for humidity, and OUT3 for timer functions.

• SET bouton: Used to select an outlet for configuration or confirm settings.
• Bouton MODE: Used to change the operating mode (e.g., heating/cooling, humidification/dehumidification, timer program).
• Up (▲) Button: Increases values or navigates menu options.
• Down (▼) Button: Decreases values or navigates menu options.
• SOTI 1: Temperature controlled outlet.
• SOTI 2: Humidity controlled outlet.
• SOTI 3: Timer controlled outlet.

4.2. Sonde

The controller comes with two separate probes: one for temperature and one for humidity. These probes are essential for accurate environmental monitoring.

Image 3: The temperature probe (left) and humidity probe (right) connected to the controller, illustrating their distinct functions.

5. Inisyal Enstalasyon

1. Konekte Sond yo: Plug the temperature probe and humidity probe into their respective ports on the controller. Ensure they are securely connected.
2. Plasman: Position the probes in the environment you wish to monitor and control. Ensure they are not directly exposed to heat sources, moisture, or airflow that could skew readings.
3. Pouvwa sou: Plug the controller into a standard 120V AC power outlet. The display will illuminate, showing current temperature, humidity, and time.
4. Konekte Aparèy: Plug your heating/cooling device into OUT1, your humidification/dehumidification device into OUT2, and any timed appliance (e.g., lights, misters) into OUT3.

6. Operasyon Enstriksyon

6.1. Setting Temperature Control (OUT1)

1. Peze a SET button repeatedly until OUT1 is selected (indicated by a flashing OUT1 icon or similar).
2. Sèvi ak la Anlè (▲) or Desann (▼) buttons to adjust the desired target temperature.
3. Peze MÒD to cycle through heating (HEAT) or cooling (COOL) modes. Select the appropriate mode for your connected device.
4. Peze SET to confirm the temperature and mode.
5. To set the temperature differential (hysteresis), press and hold SET for a few seconds when OUT1 is selected. Use Leve/Desann to adjust the difference between the set point and when the device turns on/off. Press SET pou konfime.

6.2. Setting Humidity Control (OUT2)

1. Peze a SET button repeatedly until OUT2 is selected.
2. Sèvi ak la Anlè (▲) or Desann (▼) buttons to adjust the desired target humidity percentage.
3. Peze MÒD to cycle through humidification (HUMIDIFICATION) or dehumidification (DEHUMIDIFICATION) modes. Select the appropriate mode.
4. Peze SET to confirm the humidity and mode.
5. To set the humidity differential, press and hold SET for a few seconds when OUT2 is selected. Use Leve/Desann pou ajiste. Peze SET pou konfime.

6.3. Setting Timer Control (OUT3)

1. Peze a SET button repeatedly until OUT3 is selected.
2. Peze MÒD to enter the timer programming interface.
3. Sèvi ak Anlè (▲) or Desann (▼) to set the ON time (hour and minute). Press SET pou w ale nan pwochen anviwònman an.
4. Set the OFF time (hour and minute) using Leve/Desann epi SET.
5. The controller supports multiple ON/OFF programs for OUT3. Refer to the on-screen prompts for additional program slots.
6. Peze SET to save and exit the timer settings.

6.4. Chanje Inite Tanperati (°C/°F)

To switch between Celsius and Fahrenheit, press and hold the Anlè (▲) button for approximately 3 seconds. The display will change accordingly.

7. Antretyen

• Netwayaj: Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
• Swen Sonde: Keep the probes clean and free from debris. Avoid bending or damaging the probe cables. If probes become dirty, gently clean them with a damp cloth and allow them to dry completely before re-use.
• Depo: When not in use, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.

NAN. Depanaj

9. Espesifikasyon teknik

10. Garanti ak Sipò Kliyan

DIGITEN provides a one-year warranty for any quality-related issues with this product. For technical assistance, troubleshooting, or warranty claims, please contact DIGITEN customer support through the retailer where the product was purchased or visit the official DIGITEN websit pou enfòmasyon kontak.

Tanpri konsève prèv acha ou a pou sèvis garanti a.