1. Entwodiksyon
The INKBIRDPLUS Split-Type Temperature Controller (Model JK-TC810) is a versatile digital thermostat designed for precise temperature management. It features a split design with a separate display unit and power outlet, offering flexible installation and ease of use. This controller supports both heating and cooling modes, periodic timing control, and includes high/low temperature alarms. It is suitable for a wide range of applications, including greenhouses, reptile habitats, incubators, refrigeration units, and home brewing.
2. Pwodwi souview
The INKBIRDPLUS JK-TC810 consists of a main control unit with an LCD display and a separate power outlet unit, connected by a 2.7-meter control cable. A temperature probe is also included for accurate measurement.
Image: The INKBIRDPLUS Split-Type Temperature Controller, showing the main display unit, the UK plug power outlet, and the temperature probe.
Karakteristik kle:
- Split-Type Design: Separate display and outlet for flexible placement.
- Heating/Cooling Modes: Automatically switches between modes based on set temperatures.
- 4 Mòd Revèy: Cycle timer, countdown ON, countdown OFF, and countdown ON/OFF.
- Ekran LCD retroeklere: Clear visibility of parameters in various lighting conditions.
- Kalibrasyon Tanperati: Allows for fine-tuning of temperature readings.
- Fonksyon memwa: Kenbe paramèt yo apre yon pann kouran.
- Lajè ranje tanperati: Operates from -40°C to 120°C (-40°F to 248°F).
Image: An illustration detailing the main features of the controller, including split-type design, heating/cooling, periodic timing, temperature calibration, backup memory, and backlit LCD screen.
3. Enstalasyon
- Dekonpoze: Ak anpil atansyon retire tout eleman nan anbalaj la.
- Konekte Sond: Insert the temperature probe into the designated port on the main control unit.
- Sond Pozisyon: Place the temperature probe in the environment where temperature needs to be monitored and controlled. Ensure it is not directly exposed to heating or cooling elements to get an accurate reading.
- Ploge nan: Connect the power outlet unit to a standard UK electrical socket. The main control unit will power on and display the current temperature.
- Konekte aparèy: Plug your heating or cooling appliance (e.g., heater, fan, incubator) into the power outlet unit of the controller.
4. Operasyon Enstriksyon
4.1 Kontwòl Tanperati Debaz
The controller operates in two main modes: Heating and Cooling. The mode is determined by the relationship between the Start Temperature (ON) and Stop Temperature (OFF).
- Mòd chofaj: When Start Temp < Stop Temp. The appliance will turn ON when the measured temperature drops below the Start Temp and turn OFF when it reaches the Stop Temp.
- Mòd refwadisman: When Start Temp > Stop Temp. The appliance will turn ON when the measured temperature rises above the Start Temp and turn OFF when it drops to the Stop Temp.
Image: Visual representation of the controller used in both heating (e.g., with a space heater) and cooling (e.g., with an air conditioner) scenarios, demonstrating its versatility.
4.2 Ajisteman Tanperati yo
- Peze a SET button once. The Start Temperature (ON) will flash.
- Sèvi ak la UP/CLK epi DESANN buttons to adjust the desired Start Temperature.
- Peze a SET button again. The Stop Temperature (OFF) will flash.
- Sèvi ak la UP/CLK epi DESANN buttons to adjust the desired Stop Temperature.
- Peze a SET button a third time to confirm and exit the setting mode, or wait a few seconds for it to auto-save.
4.3 Mòd Distribisyon
The controller offers four timing modes for advanced control. Press the MÒD button repeatedly to cycle through these options (F01, F02, F03, F04).
Image: Display examples of the four timing modes (F01 Cycle Timer, F02 CD ON, F03 CD OFF, F04 CD ON, CD OFF) on the controller's LCD screen.
- F01: Cycle Timer (ON/OFF Cycle): Set an ON duration and an OFF duration for the appliance to cycle repeatedly.
- F02: Countdown ON: Set a countdown time after which the appliance will turn ON and stay ON.
- F03: Countdown OFF: Set a countdown time after which the appliance will turn OFF and stay OFF.
- F04: Countdown ON, Countdown OFF: Set a countdown for the appliance to turn ON, and then another countdown for it to turn OFF.
To set the times for each mode, select the desired mode using the MÒD bouton, epi peze SET epi itilize UP/CLK epi DESANN pou ajiste lè yo ak minit yo.
4.4 Kalibrasyon Tanperati
If the measured temperature deviates from a known accurate thermometer, you can calibrate the controller:
- Avèk aparèy la limen, peze epi kenbe bouton an SET button for approximately 3 seconds to enter the advanced settings menu.
- Sèvi ak UP/CLK or DESANN to navigate to the temperature calibration setting (refer to the on-screen indicator or specific symbol in the full manual).
- Peze SET to select, then use UP/CLK or DESANN to adjust the calibration value. A positive value increases the displayed temperature, a negative value decreases it.
- Peze SET to confirm and exit, or wait for auto-save.
4.5 Anviwònman ekleraj
The backlight duration can be adjusted for energy saving or continuous visibility. Access this setting through the advanced settings menu (press and hold SET for 3 seconds) and adjust the backlight timer as needed.
5. Antretyen
- Netwayaj: Wipe the controller and probe with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.
- Swen Sonde: Ensure the temperature probe is clean and free from debris for accurate readings. Avoid bending or damaging the probe cable.
- Depo: When not in use, store the controller in a dry, cool place away from direct sunlight and extreme temperatures.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Kontwolè pa limen | No power to the outlet; faulty unit | Check the power socket; ensure the unit is properly plugged in. If issues persist, contact support. |
| Lekti tanperati ki pa egzak | Probe dirty or damaged; calibration needed; probe placed incorrectly | Clean the probe; perform temperature calibration (Section 4.4); reposition the probe away from direct heat/cold sources. |
| Appliance not turning ON/OFF as expected | Incorrect Start/Stop temperature settings; wrong mode (heating/cooling); appliance not plugged in or faulty | Verify Start and Stop temperature settings (Section 4.2); ensure the appliance is functional and correctly plugged into the controller's outlet. |
| Timing function not working | Incorrect timing mode selected or parameters set incorrectly | Review and adjust timing mode settings (Section 4.3). |
7. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Nimewo Modèl | JK-TC810 |
| Ranje kontwòl tanperati | -40 ° C a 120 ° C (-40 ° F a 248 ° F) |
| Kalite ploge | UK ploge |
| Pwa atik | 256 gram |
| Dimansyon pwodwi | 15.5P x 8W x 8H santimèt |
| Control Cable Length | 2.7 mèt (approx.) |
| Ekspozisyon | Retroeklere LCD |
8. Garanti ak sipò
INKBIRDPLUS products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact INKBIRDPLUS customer service through their official websit la oswa machann kote ou te achte pwodwi a. Kenbe resi acha ou kòm prèv acha.
9. Aplikasyon
The INKBIRDPLUS Split-Type Temperature Controller is suitable for a wide array of temperature-sensitive environments:
Image: A collage illustrating diverse applications for the temperature controller, such as home brewing, refrigeration, aquariums, reptile enclosures, e-bike charging, incubation, and general home temperature control.
- Home Brewing & Fermentation: Maintain precise temperatures for yeast activity.
- Refrijerasyon: Control cooling units for specific storage needs.
- Aquariums: Regulate water temperature for aquatic life.
- Reptile Habitats: Create optimal thermal environments for reptiles.
- Enkubasyon: Ensure stable temperatures for egg hatching or cultures.
- Sèr: Manage climate for plant growth.
- Itilizasyon jeneral lakay: Control various heating or cooling devices.
