Entwodiksyon
The Fuxtec FX-MH123ECO is a powerful and efficient thermal hedge trimmer designed for precise and effortless trimming of hedges and shrubs. Equipped with a 2-stroke 25.4 cm³ engine, it delivers 0.7 kW of power, capable of cutting branches up to 28 mm thick. Its 560 mm blade length allows for quick and accurate work on large areas. The centrifugal clutch ensures safe operation by stopping the blades automatically at idle. With an ergonomic design and reduced vibration levels (2.56 m/s²), it offers optimal comfort even during extended use. The large 650 ml fuel tank provides maximum autonomy without interruption. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Fuxtec hedge trimmer.
Image: The Fuxtec FX-MH123ECO thermal hedge trimmer, showcasing its engine, handles, and long cutting blade.
Enfòmasyon sou Sekirite
Toujou bay sekirite priyorite lè w ap itilize zouti elektrik. Li epi konprann tout avètisman ak enstriksyon sekirite yo anvan ou itilize yo.
- Ekipman Pwoteksyon Pèsonèl (PPE): Always wear safety glasses, hearing protection, gloves, and sturdy footwear. Long pants and sleeves are recommended.
- Manyen Gaz: Handle fuel in a well-ventilated area, away from ignition sources. Do not smoke while refueling.
- Zòn travay: Keep the work area clear of bystanders, children, and pets. Ensure good footing and balance.
- Sekirite lam: The blades are extremely sharp. Never touch the blades when the engine is running. Ensure the engine is off and the blade has stopped before performing any adjustments or maintenance.
- Vibration: Prolonged exposure to vibrations can cause injury. Take regular breaks and use anti-vibration gloves if available.
- Ijans Stop: Familyarize w ak kote ak kijan pou w fonksyone switch arè ijans lan.
Eleman souview
Familiarize yourself with the main components of your Fuxtec FX-MH123ECO hedge trimmer.
Image: Diagram illustrating key components including the 2-stroke engine, practical handle, flexible 90° pivoting handle, integrated blade protection, and precise cutting blade with 56cm cutting length.
- Inite motè: The 2-stroke 25.4 cm³ engine provides power for cutting.
- Tank gaz: 650 ml capacity for fuel mixture.
- Manch devan: Ergonomic handle for stable grip and control.
- Rear Handle (Pivoting): Flexible handle that pivots 90° to the left or right for comfortable cutting in various directions.
- Koupe lam: 560 mm long, made of hardened steel for precise and clean cuts.
- Pwoteksyon lam: Integrated protection for safe transport and storage.
- Deklanche gaz: Controls engine speed and blade movement.
- One Stop switch: For immediate engine shutdown.
Enstalasyon
1. Fuel Mixture Preparation
The FX-MH123ECO uses a 2-stroke engine and requires a specific fuel mixture. Use unleaded gasoline mixed with high-quality 2-stroke engine oil at a ratio of 1:40 (1 part oil to 40 parts gasoline).
- Always mix fuel in a clean, approved fuel container.
- Shake the container well before filling the hedge trimmer's fuel tank.
- Do not store mixed fuel for extended periods.
2. Filling the Fuel Tank
- Asire w motè a etenn epi li frèt.
- Mete taye bòdi a sou yon sifas ki plat ki estab.
- Carefully open the fuel tank cap.
- Pour the prepared fuel mixture into the tank using a funnel to prevent spills. Do not overfill.
- Securely close the fuel tank cap. Wipe away any spilled fuel immediately.
Enstriksyon Operasyon
1. Kòmanse motè a
- Place the hedge trimmer on a firm, flat surface. Ensure the blade is clear of any obstructions.
- Set the stop switch to the "ON" position.
- Angaje choke a (si machin nan demaraj frèt).
- Peze anpoul amorseur a plizyè fwa jiskaske gaz la vizib.
- Pull the starter cord firmly and smoothly until the engine fires (usually 1-3 pulls).
- Once the engine fires, disengage the choke.
- Pull the starter cord again until the engine runs smoothly.
- Kite motè a chofe pou kèk moman anvan ou peze akseleratè a.
2. Koupe operasyon
- Kenbe taye bòdi a byen fèm ak tou de men yo.
- Maintain a stable stance and balance.
- Start cutting from the bottom of the hedge and work your way up for vertical cuts. For horizontal cuts, move the trimmer in a sweeping motion.
- Do not force the blade through thick branches. The maximum cutting capacity is 28 mm.
- Utilize the 90° pivoting rear handle for ergonomic cutting angles. Unlock, rotate, and lock the handle as needed.
3. kanpe motè a
To stop the engine, simply move the stop switch to the "OFF" position. The centrifugal clutch will ensure the blades stop moving when the engine idles down.
Antretyen
Antretyen regilye asire lonjevite ak pèfòmans optimal taye pyebwa ou a.
1. Antretyen lam
- Netwayaj: After each use, clean the blades of sap, debris, and resin. Use a stiff brush and a suitable cleaning agent.
- Lubrifikasyon: Apply a light coat of machine oil or blade lubricant to the blades after cleaning to prevent rust and ensure smooth operation.
- File: If the blades become dull, they can be sharpened by a qualified technician or with appropriate sharpening tools. Always ensure the engine is off and the spark plug cap is removed before handling blades for sharpening.
Imaj: Yon gwo plan view of the hardened steel cutting blades, highlighting their sharp edges and robust construction.
2. Filtre lè
Check and clean the air filter regularly, especially in dusty conditions. A clogged air filter can reduce engine performance and increase fuel consumption. Clean with warm soapy water, rinse, and allow to dry completely before reinstallation, or replace if heavily soiled.
3. Bouji
Inspect the spark plug periodically. Clean any carbon deposits and adjust the gap if necessary. Replace the spark plug if it is worn or damaged.
4. Depo
When storing the hedge trimmer for an extended period:
- Drain the fuel tank completely or run the engine until it runs out of fuel.
- Clean the entire unit thoroughly.
- Apply a rust preventative to the blades.
- Store in a dry, well-ventilated area, out of reach of children.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Motè pa kòmanse | Pa gen gaz oswa move melanj gaz Stop switch in "OFF" position Filtè gaz bouche Bouji sal Choke not engaged (cold start) | Ranpli ak melanj gaz ki kòrèk la Move stop switch to "ON" Netwaye/ranplase filtè gaz Netwaye/ranplase bouji Angaje choke pou demaraj frèt |
| Engine runs, but blades do not move | Engine idling too low (centrifugal clutch not engaging) Mekanis lam bloke | Increase throttle slightly Turn off engine, clear any obstructions from blades |
| Pèt pouvwa pandan operasyon an | Filtè lè bouche Melanj gaz ki pa kòrèk Lam mat | Netwaye/ranplase filtè lè a Ensure correct 1:40 fuel mixture File oswa ranplase lam yo |
| Twòp Vibration | Konpozan ki lach Lam ki domaje | Tcheke epi sere tout eleman fikse yo Inspect blades for damage, replace if necessary |
Espesifikasyon
Technical specifications for the Fuxtec FX-MH123ECO Thermal Hedge Trimmer.
Image: Visual representation of key technical data including weight, fuel mixture, engine displacement, blade length, engine type, max cutting thickness, power, and starter type.
| Karakteristik | Detay |
|---|---|
| Modèl | FX-MH123ECO |
| Kalite motè | 2-konjesyon serebral |
| Deplasman motè | 25.4 cm³ |
| Sorti pouvwa | 0.7 kW |
| Longè lam | 560 mm (effective cutting length) |
| Max. Koupe epesè | 28 mm |
| Kapasite tank gaz | 650 ml |
| Rapò melanj gaz | 1:40 (Gazolin: lwil 2-tan) |
| Nivo Vibration | 2.56 m/s² |
| Materyèl lam | Steel fè tèt di toujou |
| Pwa | Apeprè. 5.6 kg |
Garanti ak sipò
For warranty information, technical support, or spare parts, please contact Fuxtec customer service. Keep your purchase receipt as proof of purchase.
- Fuxtec Customer Service: Refer to the contact information provided with your product packaging or visit the official Fuxtec websit.
- Pyès rezèv: Fuxtec aims to provide long-term availability of spare parts for their products.
