LTS LTN8708D-P8N 8 Channel PoE NVR User Manual

Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your LTS LTN8708D-P8N 8 Channel Power-over-Ethernet (PoE) Network Video Recorder (NVR). Please read this manual thoroughly before using the product to ensure proper and safe operation.

Pwodwi souview

The LTS LTN8708D-P8N is an 8-channel PoE NVR designed for advanced surveillance systems, supporting up to 12MP resolution cameras. It features intelligent human and vehicle detection capabilities to enhance security monitoring.

Karakteristik kle:

• Up to 8 IP camera input channels.
• Plug & play functionality with 8 power-over-Ethernet (PoE) interfaces.
• Supports H.264 / H.264+ / H.265 / H.265+ video compression formats.
• Decoding capacity: Up to 2 channels at 12 MP, 3 channels at 8 MP, 6 channels at 4 MP, or 12 channels at 1080p.
• Up to 80 Mbps incoming bandwidth.
• Provides MD 2.0 / VCA functions for intelligent detection.
• Includes a pre-installed 2TB hard drive for immediate recording.
• Equipped with 2 SATA interfaces for additional storage expansion.

This image displays the front and rear panels of the LTS LTN8708D-P8N NVR. The front panel typically includes status indicators and a USB port, while the rear panel features multiple PoE ports for camera connections, LAN port, audio input/output, HDMI, VGA, USB ports, and the power input.

Ki sa ki nan bwat la

Lè w ap debale, verifye si tout atik ki nan lis anba a yo la epi yo an bon eta:

• LTS LTN8708D-P8N NVR unit (with pre-installed 2TB hard drive)
• Adaptè pouvwa
• USB sourit
• Kontwòl Remote
• SATA Cables (for additional hard drives)
• Ethernet kab
• Vis pou monte HDD

This image shows the accessories typically included with the NVR, which consist of a power adapter, mouse, remote control, SATA cables for additional hard drives, and an Ethernet cable.

Enstalasyon

1. Debalaj ak Enspeksyon

Carefully remove the NVR and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact your vendor immediately.

2. Enstalasyon Disk Di (Si ou vle)

Your NVR comes with a 2TB hard drive pre-installed. If you wish to install additional hard drives (up to two SATA drives supported), power off the NVR, open the casing, connect the SATA data and power cables to the new drive, and secure it with the provided screws. Close the casing before powering on.

3. Konekte periferik

• Kamera: Connect IP cameras to the NVR's PoE ports using Ethernet cables. The NVR will provide power and data.
• Siveye: Konekte yon monitè nan pò pwodiksyon HDMI oswa VGA NVR la.
• Rezo: Connect the NVR's LAN port to your network router or switch using an Ethernet cable for remote access and internet connectivity.
• Pouvwa: Connect the provided power adapter to the NVR's power input and then to a power outlet.
• Aparèy USB: Connect the USB mouse to a USB port for navigation.

4. Inisyal Konfigirasyon

Upon first power-on, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up administrator passwords, network settings, date/time, and hard drive initialization. Ensure you set a strong password for security.

Enstriksyon Operasyon

1. Navigasyon nan Entèfas Itilizatè a

Sèvi ak sourit USB ki konekte a pou navige nan koòdone grafik itilizatè (GUI) NVR a. Klike dwa pou jwenn aksè nan meni prensipal la, epi klike gòch pou chwazi opsyon oswa ouvri sou-meni yo.

2. Viv View ak Lektur

• Viv View: Soti nan ekran prensipal la, ou kapab view live feeds from all connected cameras. Double-click a camera window to view li nan ekran plen.
• Lektur: Access the 'Playback' menu to review anrejistre footage. Select the desired camera, date, and time to start playback.

3. Human and Vehicle Detection

The NVR's advanced MD 2.0 / VCA functions allow for intelligent detection of humans and vehicles, minimizing false alarms from environmental factors. Configure these settings in the 'Event' or 'Smart Analysis' menu.

This image illustrates the Human and Vehicle Detection feature, highlighting how the NVR can differentiate between humans, vehicles, and other movements like rain, leaves, or animals to reduce false alarms. Alerts are sent to a connected device, as shown by the smartphone notification.

4. Anrejistreman Anrejistreman

Customize recording schedules, motion detection areas, and recording quality in the 'Record' menu. You can set continuous recording, motion-triggered recording, or scheduled recording.

5. Aksè Rezo

Configure network settings (IP address, port forwarding) in the 'Network' menu to enable remote viewatravè yon aplikasyon mobil oubyen web browser. Ensure your network is secure.

Antretyen

1. Jesyon Disk Di

Regularly check the status of your hard drives in the 'HDD Management' menu. Format drives as needed, especially after initial installation or if issues arise. Ensure sufficient storage space for recordings.

2. Mizajou Firmware

Tcheke manifakti a regilyèman website for firmware updates. Updating the firmware can improve performance, add new features, and enhance security. Follow the provided instructions carefully during the update process.

3. System Backup and Restore

Regularly back up important configuration settings to a USB drive. This allows for quick restoration in case of system resets or failures. The 'Backup' and 'Restore' options are typically found in the 'System' menu.

Depanaj

Pwoblèm komen ak solisyon yo

• Pa gen Sorti Videyo: Check monitor connections, power supply, and ensure the correct input source is selected on the monitor. Verify NVR power status.
• Kamera ki pa montre: Ensure cameras are properly connected to PoE ports and receiving power. Check camera IP addresses and network settings.
• Pa gen anrejistreman: Verify hard drive status and ensure it is initialized. Check recording schedules and motion detection settings.
• Erè Aksè a Distans: Confirm network connectivity, correct IP address/port forwarding settings, and firewall configurations. Ensure the mobile app or software is up to date.
• Modpas bliye: Refer to the manufacturer's official support resources for password reset procedures.

Espesifikasyon

Garanti ak sipò

For warranty information, technical support, and service inquiries, please refer to the official LTS Security website or contact your authorized vendor. Keep your purchase receipt and product serial number readily available for any warranty claims or support requests.