Beninca Bull 424 FC Sliding Gate Opener

1. Entwodiksyon

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Beninca Bull 424 FC Sliding Gate Opener. This chain-driven automation system is designed for residential sliding gates, supporting gates up to 800 lbs and 20 feet in length. Please read this manual thoroughly before proceeding with installation or operation.

Imaj 1.1: Plis paseview of the Beninca Bull 424 FC Sliding Gate Opener kit, showing the main motor unit, control panel, two remote controls, and a set of safety photocells.

2. Enfòmasyon sou Sekirite

WARNING: Improper installation or use can cause serious injury or death. Always follow all safety instructions.

• Ensure all electrical connections are performed by a qualified electrician and comply with local electrical codes.
• Keep hands, feet, and clothing clear of the gate and opener mechanism during operation.
• Pa kite timoun yo jwe ak oswa opere kontwòl ouvè baryè a.
• Enspekte baryè a ak ouvè pòt la regilyèman pou wè si gen siy itilizasyon, domaj oswa move aliyman.
• The photocell safety devices must be installed and maintained correctly to prevent entrapment.
• Dekonekte kouran anvan ou fè nenpòt antretyen oswa reparasyon.

3. Pake kontni

Verifye ke tout konpozan ki nan lis anba a yo prezan nan pake ou a:

• Beninca Bull 424 FC motor base
• Control panel with built-in receiver
• 20 ft chain for sliding gates
• Two (2) TO.GO 2A garage opener remote controls
• Beninca PUPILLA.T true beam photocell set
• Installation hardware (bolts, screws, etc. - specific items may vary)

4. Enstalasyon ak Enstalasyon

This section outlines the general steps for installing the Beninca Bull 424 FC. Refer to the detailed installation diagrams provided separately with your product for precise measurements and wiring instructions.

4.1 Preparasyon Sit

Ensure the gate operates smoothly manually before installing the opener. The installation area for the motor base should be level and stable, capable of supporting the unit's weight (approximately 60 lbs).

4.2 Mounting the Motor Base

Securely mount the Beninca Bull 424 FC motor base to a concrete pad or suitable foundation. The unit dimensions are approximately 13 inches (W) x 10 inches (D) x 23 inches (H). Proper alignment with the gate's chain path is critical.

4.3 Enstalasyon chèn

Attach the provided 20 ft chain to the gate and route it through the motor's drive sprocket. Ensure the chain is taut but not overly tight, allowing for smooth movement without excessive friction. Adjust chain tension as needed.

4.4 Koneksyon elektrik

Connect the motor to the control panel and provide power according to the wiring diagram. The control panel has a built-in receiver. All electrical work must comply with local regulations and be performed by a certified professional.

4.5 Photocell Installation

Install the Beninca PUPILLA.T true beam photocell set on opposite sides of the gate opening. These safety devices detect obstructions in the gate's path, preventing closure and enhancing safety. Ensure they are aligned correctly for reliable operation.

5. Operasyon Enstriksyon

5.1 Pè kontwòl remote

To pair the TO.GO 2A remote controls with the built-in receiver in the control panel, follow the specific programming instructions provided with the control panel documentation. Typically, this involves pressing a programming button on the control board and then a button on the remote.

5.2 Basic Gate Operation

Once paired, press a programmed button on the remote control to initiate gate movement. A single press will typically open or close the gate. Pressing again during movement will stop the gate. The system features adjustable speed settings for smooth movement.

5.3 Karakteristik sekirite

The PUPILLA.T photocells will prevent the gate from closing if an obstruction is detected in its path. The gate will either stop or reverse direction, depending on the control panel's configuration. Test these safety features regularly.

6. Antretyen

Regular maintenance ensures the longevity and reliable operation of your gate opener. Perform these checks at least quarterly, or more frequently with heavy use.

• Netwaye inite motè a: Keep the motor housing free from dirt, debris, and insects.
• Lubricate the Chain: Apply a suitable lubricant to the drive chain to ensure smooth operation and prevent rust.
• Inspect Photocell Lenses: Clean the lenses of the PUPILLA.T photocells to ensure clear beam transmission and reception.
• Tcheke pou obstak: Ensure the gate's path is clear of any obstacles that could impede movement.
• Karakteristik sekirite tès yo: Periodically test the photocells and any other safety edges or sensors to confirm they are functioning correctly.
• Enspekte fil elektrik: Check all electrical wiring for signs of wear, damage, or loose connections.

NAN. Depanaj

This section addresses common issues you might encounter. For problems not listed here, or if solutions do not resolve the issue, contact customer support.

8. Espesifikasyon

9. Garanti ak sipò

For product support, technical assistance, or warranty inquiries, please contact the seller or manufacturer directly. This product typically includes a 30-day easy return policy from the point of purchase. Retain your proof of purchase for all warranty claims.

For customer support, refer to the contact information provided by your retailer or visit the official BENINCA websit.