1. Enfòmasyon sou Sekirite
Tanpri li epi konprann tout enstriksyon yo anvan ou monte epi itilize li. Kenbe manyèl sa a pou referans pita.
- Limit pwa: Do not load more than 1500 pounds on the bed frame. Exceeding this weight limit may cause damage or instability, leading to potential injury.
- Asanble: Ensure all bolts and screws are securely tightened before use. Periodically check and retighten fasteners as needed.
- Timoun: Pa kite timoun yo monte sou oswa jwe ak ankadreman kabann lan pandan y ap asanble oswa itilize li.
- Plasman: Place the bed frame on a level surface to ensure stability.
- Kwen byen file: Be cautious of potential sharp edges during assembly.
2. Pake kontni
Verifye ke tout konpozan yo prezan anvan ou kòmanse asanblaj la. Si gen nenpòt pyès ki manke oswa ki domaje, tanpri kontakte sèvis kliyan.
Imaj: Detaye view of bed frame components, showing the waterproof headboard, heavy-duty metal slats, easy assembly connection, and floor protectors.
Konpozan tipik:
- Headboard (Wooden slats integrated into metal frame)
- Footboard (Metal frame with wooden accent)
- Ray bò (gòch ak dwat)
- Travès Sipò Santral(yo)
- Planch asye
- Janm sipò
- Pakè pyès ki nan konpitè (Boulon, rondelle, nwa, kle Allen)
- Pwoteksyon etaj
- Manyèl Enstriksyon
3. Enstriksyon Asanble
Assembly is designed to be straightforward. It is recommended to have two people for easier and safer assembly. Clear a spacious area for assembly.
Gid etap pa etap:
- Depake epi idantifye pyès yo: Retire tout konpozan yo nan anbalaj la avèk prekosyon. Mete yo an plas epi konpare yo ak lis sa ki nan pake a pou asire w ke tout bagay la.
- Attach Headboard and Footboard to Side Rails: Connect the side rails to the headboard and footboard using the provided bolts and Allen wrench. Do not fully tighten bolts until all major components are connected.
- Sipò Sant Enstalasyon an: If your model includes a center support beam, attach it according to the diagrams in your specific instruction sheet.
- Place Steel Slats: Position the steel slats across the bed frame. Ensure they are evenly spaced and securely seated within the frame. Some slats may click into place or require minor tapping with a rubber mallet (not included) to ensure a snug fit.
- Attach Floor Protectors: Insert the plastic floor protectors into the bottom of each leg to prevent scratching your floor and reduce noise.
- Sere final la: Once all parts are assembled and aligned, go back and securely tighten all bolts and screws. Ensure the frame is stable and does not wobble.
Image: The assembled metal bed frame with its steel slat support system and wooden headboard, ready for a mattress.
Imaj: Yon angilè view of the bed frame, highlighting the robust metal construction and the aesthetic wooden headboard.
4. Operasyon
Once assembled, the Yicensen Twin XL Metal Bed Frame is ready for use.
- Plasman Matla: Carefully place your Twin XL mattress directly onto the steel slats. A box spring is not required.
- Konsepsyon san bri: The frame is designed with foot pads and secure connections to minimize noise. Ensure all connections remain tight for optimal performance.
- Depo anba kabann: Wotè 18 pous la bay ample space for under-bed storage. Utilize this area for bins, luggage, or other items to keep your room tidy.
Image: Diagram illustrating the generous 16-inch clearance beneath the bed frame, ideal for storing various items.
5. Antretyen
Regular maintenance will help prolong the life and performance of your bed frame.
- Netwayaj: Siye ankadreman metal la ak yon twal mou,amp cloth. For the wooden headboard, use a dry or slightly damp twal. Evite pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
- Tcheke Fastener: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they are tight. Retighten if necessary to maintain stability and prevent squeaking.
- Pwoteksyon pou planche: Ensure floor protectors are still in place and in good condition to prevent floor scratches and reduce noise. Replace if worn.
NAN. Depanaj
Si ou rankontre nenpòt pwoblèm ak ankadreman kabann ou an, gade solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Bed frame is squeaking or noisy. | Boulon oswa koneksyon ki lach. | Tighten all bolts and screws on the frame. Ensure all slats are properly seated. |
| Matla a glise sou ankadreman an. | Lack of friction between mattress and slats. | Consider using a non-slip mattress pad or rubber gaskets between the mattress and slats. |
| Ankadreman an santi l enstab oswa li pa ka fèb. | Uneven floor or loose connections. | Ensure the bed is on a level surface. Re-check and tighten all assembly bolts. |
| Pati ki manke pandan asanblaj la. | Erè anbalaj. | Contact Yicensen customer support with your purchase details. |
7. Espesifikasyon
Key technical details for the Yicensen Twin XL Metal Bed Frame.
Image: Diagram showing the dimensions of the Twin XL bed frame, including length, width, and height.
- Modèl: Twin XL 18 inch
- Mak: Yicensen
- Gwosè: Twin XL
- Dimansyon pwodwi: 79.6"L x 37.5"L x 42"H
- Koulè: Mahogany (Headboard)
- Materyèl: Metal frame, Wooden headboard
- Kapasite pwa: 1500 liv
- Pwa atik: 33.9 liv
- Asanble obligatwa: Wi
- Karakteristik espesyal: Fade Resistant (Headboard finish)
- Gwosè Matla Konpatib: Twin XL
8. Garanti ak sipò
For warranty information or customer support, please contact Yicensen directly through your retailer's customer service portal or the official Yicensen website. Please have your purchase receipt and product model information available when contacting support.
