Longriver MX08

Longriver Tem8(R7Pro) Shower Filter with Wireless Temperature Display User Manual

Modèl: MX08

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Longriver Tem8(R7Pro) Shower Filter with Wireless Temperature Display. Please read this manual thoroughly before use to ensure proper function and longevity of the product. Retain this manual for future reference.

2. Pwodwi souview

The Longriver Tem8(R7Pro) is a 2-in-1 shower filter system designed to improve water quality and provide real-time temperature monitoring. It features advanced filtration and a wireless temperature display for enhanced showering comfort and safety.

Longriver Tem8(R7Pro) Shower Filter and Wireless Temperature Display

Figure 2.1: The Longriver Tem8(R7Pro) Shower Filter and its Wireless Temperature Display.

Internal filtration layers of the shower filter

Figure 2.2: Diagram illustrating the multi-stage filtration layers designed to improve water quality for skin and hair health.

3. Enfòmasyon sou Sekirite

4. Pake kontni

Verifye ke tout konpozan yo prezan nan pake ou a:

5. Gid Enstalasyon

The Tem8(R7Pro) shower filter is designed for easy, tool-free installation. Follow these steps:

5.1. Shower Filter Installation

  1. Remove your existing showerhead from the shower arm.
  2. Screw the Tem8(R7Pro) shower filter onto the shower arm. Ensure the connection is hand-tight.
  3. Screw your showerhead onto the bottom of the Tem8(R7Pro) shower filter. Ensure this connection is also hand-tight.
  4. Verify that the water inlet and outlet directions on the filter are correct. Incorrect connection will prevent proper function.

5.2. Wireless Temperature Display Installation

  1. Remove the mounting plate from the back of the wireless display unit.
  2. Peel off the protective film from the 3M adhesive tape on the back of the mounting plate.
  3. Attach the mounting plate to a clean, dry wall surface near your shower, within 6.56 feet (2 meters) of the filter unit for optimal signal reception.
  4. Press the power button on the back of the display unit to activate it.
  5. Mete ekran ekspozisyon an nan plak zen an depi anwo jouk anba.
Installation diagram for shower filter and wireless temperature display

Figure 5.1: Step-by-step installation guide for the shower filter and wireless temperature display.

Shower filter compatibility with various shower head types

Figure 5.2: The filter is compatible with rain showers, fixed showers, and handheld showers, featuring standard G1/2 inch ports.

6. Operasyon Enstriksyon

Once installed, the Tem8(R7Pro) system operates automatically when water flows through the filter.

6.1. Real-time Temperature Display

The wireless display unit will show the water temperature in Fahrenheit (°F) as soon as water begins to flow. The display updates rapidly, typically within 0.25 seconds.

The temperature sensing range is 0°F to 188°F.

Wireless temperature display showing color-coded temperature ranges

Figure 6.1: The wireless display provides real-time temperature readings with color indicators for easy temperature assessment.

Examples of suitable bathing temperatures for different users

Figure 6.2: The temperature display assists in setting appropriate water temperatures for various users, such as pets (102°F), babies (95°F), and adults (98°F).

7. Antretyen

7.1. Ranplasman Katouch Filtè a

The filter cartridge should be replaced regularly to maintain optimal filtration performance. The recommended replacement interval is every 3 months, or after approximately 250 baths or 500 showers, depending on water quality and usage.

  1. Fèmen tiyo dlo ki nan douch ou a.
  2. Unscrew the shower filter unit from the shower arm.
  3. Carefully separate the two halves of the filter housing.
  4. Remove the old filter cartridge and dispose of it responsibly.
  5. Insert a new, genuine Longriver replacement cartridge into the filter housing, ensuring it is seated correctly.
  6. Reassemble the filter housing, ensuring a tight seal.
  7. Screw the filter unit back onto the shower arm, then reattach your showerhead.
  8. Turn on the water supply and check for leaks. Flush the filter with cold water for a few minutes before use.
Koupe view of the shower filter showing internal cartridge

Figi 7.1: Koupe view of the shower filter, illustrating the internal cartridge that requires periodic replacement.

NAN. Depanaj

PwoblèmKòz posibSolisyon
No temperature displayed / Display flickeringLow battery in display unit; Display out of signal range; Sensor malfunction.Ensure the display unit is within 6.56 feet (2 meters) of the filter. Check if the display unit needs charging (if applicable, though hydroelectric power is for the filter, the display might have its own battery). Contact customer support if the issue persists.
Dlo k ap koule nan koneksyon yoLoose connections; Missing or damaged rubber washers.Ensure all connections are hand-tight. Check that rubber washers are properly seated and not damaged. Do not overtighten.
Presyon dlo redwiClogged filter cartridge; Incorrect installation.Replace the filter cartridge if it's due for replacement. Recheck installation steps to ensure correct assembly.
Filter unit appears cracked or damagedPhysical impact; Overtightening during installation.Discontinue use immediately. Contact customer service for a replacement. Avoid overtightening during installation.

9. Espesifikasyon

10. Sipò pou Kliyan

For any questions, concerns, or assistance with your Longriver Tem8(R7Pro) Shower Filter, please contact our customer service team. We offer 24/7 online customer service to address any issues you may encounter.

Please refer to your product packaging or the retailer's websit la pou jwenn enfòmasyon kontak espesifik.

Dokiman ki gen rapò - MX08

Preview Longriver 2-Function Shower System Installation Manual
Comprehensive installation manual for the Longriver 2-Function Shower System, detailing package contents, step-by-step installation procedures for wall and ceiling mounts, important notes on tiling and valve placement, and product maintenance guidelines.
Preview FCC Part 15C Test Report for Mopink Smart Glasses (Model MX10 Series)
FCC Part 15C test report for Mopink Smart Glasses, Model Series MX10, MX01-MX15, FCC ID 2A3GH-MX10, conducted by Shenzhen DL Testing Technology Co., Ltd.
Preview FCC Part 15C Test Report: Mopink Smart Glasses (FCC ID: 2A3GH-MX10)
Official FCC Part 15C compliance test report for Mopink Smart Glasses, covering models MX10 through MX15, FCC ID 2A3GH-MX10. Details conducted and radiated emissions testing by Shenzhen DL Testing Technology Co., Ltd.