1. Entwodiksyon
The SINOTIMER 12V Digital Timer Switch is a versatile, programmable device designed for precise control of electrical circuits. It features 7-day programming capabilities, allowing for up to 28 ON/OFF events per day. This timer is suitable for various applications powered by DC, AC, or solar battery systems, providing accurate-to-the-second control for automated operations.
Imaj 1.1: Devan view of the SINOTIMER 12V Digital Timer Switch, showing the digital display and control buttons.
2. Pake kontni
Verifye ke tout atik ki nan lis anba a yo enkli nan pakè ou a:
- 1 x Timer Unit
- 1 x Mounting Support
- 1 x manyèl enstriksyon
- 1 x kouvèti pousyè
- 1 x Internal Battery (pre-installed or separate)
- 1 x Disassembly Tool
- 2 x Vis
- 5 x Connecting Wires
Image 2.1: An image displaying the contents of the SINOTIMER 12V Digital Timer Switch package, including the timer unit, mounting bracket, manual, dust cover, battery, disassembly tool, screws, and connecting wires.
3. Pwodwi Features
The SINOTIMER Digital Timer Switch offers the following key features:
- Pwogramasyon 7 jou: Schedule events for individual days or blocks of days.
- High Event Capacity: Up to 28 ON/OFF events can be programmed per day.
- Dirije endikatè pouvwa: Provides visual confirmation of power status.
- Internal Battery Backup: Retains programmed settings during power outages.
- Opsyon Fòma Tan: Supports both 12-hour and 24-hour display formats.
- Spade Connecting Wires: Includes 5 spade-type connecting wires for installation.
- Kapasite chaj ki wo: Designed to handle significant electrical loads.
- Stable and Precise Operation: Ensures reliable and accurate timing.
- Teknoloji Smart Chip: Enhances performance and functionality.
- Konsepsyon pousye: Provides protection against dust ingress.
- High Definition Digital Display: Ekran klè ak fasil pou li.
Image 3.1: An image illustrating key features of the SINOTIMER 12V Digital Timer Switch, such as high load capacity, stable and precise operation, smart chip technology, dustproof design, multiple switch settings, and a high-definition LED digital display.
4. Espesifikasyon
| Atribi | Valè |
|---|---|
| Mak | SINOTIMER |
| Modèl | TM-619 |
| Materyèl | Plastik |
| Dimansyon pwodwi | 1.77"P x 2.83"L x 2.83"H (45mm P x 72mm L x 72mm H) |
| Pwa atik | 4.6 ons (0.29 Liv) |
| Kantite Anviwònman | 28 (ON/OFF events per day) |
| Gwosè ekran | 2 pous |
| Antre pouvwa | 12V DC / AC |
| Kontakte Rating | 10A, 250VAC; 10A, 30VDC |
Image 4.1: Technical drawing showing the dimensions (62mm x 62mm x 37.5mm) and the 5-spade terminal layout of the SINOTIMER Digital Timer Switch.
5. Enstalasyon ak Enstalasyon
Avètisman sekirite: Installation should be performed by a qualified individual. Ensure power is disconnected before wiring to prevent electric shock.
5.1 Enstriksyon fil elektrik
The timer features 5 spade terminals for input power and output control. Refer to the wiring diagram below for correct connections.
Image 5.1: A diagram illustrating the wiring connections for the SINOTIMER TM-619 timer, showing input power (Line of fire, Zero line) and output connections (NO, NC).
- Tèminal 1 ak 2: Input power (12V DC/AC). Connect your power source here.
- Tèminal 3: Common (COM) for the relay output.
- Tèminal 4: Normally Open (NO) contact. The circuit is closed when the timer is ON.
- Tèminal 5: Normally Closed (NC) contact. The circuit is open when the timer is ON.
Use the provided spade connecting wires to ensure secure connections. An example of connected wires is shown below.
Image 5.2: An image showing the SINOTIMER digital timer switch with blue spade connectors attached to its terminals, demonstrating a typical wiring connection.
5.2 Montaj
The timer is designed for panel installation. Use the included mounting bracket and screws to secure the unit in place. Ensure adequate ventilation around the timer.
6. Operasyon Enstriksyon
6.1 Mete Lè Aktyèl la
- Peze a LÒJ bouton.
- Pandan w ap kenbe LÒJ, peze JOU pou fikse jou aktyèl la nan semèn nan.
- Pandan w ap kenbe LÒJ, peze LÈ pou fikse lè aktyèl la.
- Pandan w ap kenbe LÒJ, peze MIN pou fikse minit aktyèl la.
- Lage a LÒJ bouton. Lè a kounye a fikse.
6.2 Pwogramasyon Evènman ON/OFF
The timer allows for up to 28 ON/OFF programs. Follow these steps to set a program:
- Peze a TIMER Peze bouton an yon fwa. Ekran an ap montre "1 ON".
- Peze JOU to select the day(s) for this ON event. You can choose individual days, blocks of days (e.g., Mon-Fri), or all 7 days.
- Peze LÈ to set the desired hour for the ON event.
- Peze MIN to set the desired minute for the ON event.
- Peze TIMER ankò. Ekran an ap montre "1 OFF".
- Repeat steps 2-4 to set the day(s), hour, and minute for the corresponding OFF event.
- Kontinye peze TIMER to cycle through "2 ON", "2 OFF", and so on, up to "28 OFF", setting each program as needed.
- Apre ou fin mete tout pwogram ou vle yo, peze bouton an LÒJ bouton an pou retounen nan ekspozisyon lè aktyèl la.
To clear a program, press the R (Reset) button while viewing the specific ON or OFF program you wish to clear. This will set the time to "--:--".
6.3 Manyèl Mode Operasyon
La MANYÈL button allows you to override programmed settings temporarily:
- Peze MANYÈL repeatedly to cycle through modes: ON (always on), OTO (follows programmed schedule), OFF (always off).
- Chwazi OTO for the timer to execute your programmed schedules.
6.4 Fòma 12/24 èdtan
To switch between 12-hour (AM/PM) and 24-hour formats, press the LÈ bouton pandan w ap kenbe a LÒJ bouton.
7. Antretyen
7.1 Ranplasman batri
The timer includes an internal battery for backup power to retain settings. If the display becomes dim or settings are lost frequently, the battery may need replacement.
Image 7.1: An image of the SINOTIMER digital timer switch's rear panel, highlighting the battery compartment which indicates the battery can be replaced.
- Ensure the timer is disconnected from all power sources.
- Jwenn lòj batri a sou do inite a.
- Carefully open the compartment using the provided disassembly tool or a small screwdriver.
- Remove the old button-cell battery. Note its orientation.
- Insert a new, compatible button-cell battery (e.g., CR2032) with the correct polarity.
- Fèmen lòj batri a byen.
- Reconnect power and reset the current time and programs if necessary.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| No display / Unit is dead | No power supply; faulty wiring; dead internal battery. | Check power connections (Terminals 1 & 2). Verify power source. Ensure wiring is correct. Replace internal battery if necessary. |
| Programs not executing | Timer is in MANUAL ON/OFF mode; incorrect program settings; current time is wrong. | Peze MANYÈL until "AUTO" is displayed. Review program settings for correct ON/OFF times and days. Verify current time is set accurately. |
| Sòti a toujou ON/OFF | Timer is in MANUAL ON/OFF mode; relay malfunction. | Switch to "AUTO" mode using the MANYÈL button. If the issue persists, the relay may be faulty and require professional inspection or replacement. |
| Settings lost after power outage | Batri entèn lan fin itilize oswa li gen pwoblèm. | Replace the internal button-cell battery as described in Section 7.1. |
9. Garanti ak sipò
This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support or warranty claims, please contact SINOTIMER customer service through their official websit oswa revandè kote yo te achte pwodwi a.
Pou plis asistans, vizite SINOTIMER Store on Amazon.
