KISLOT Counter Height Swivel Barstools with Back (T-KSA2051) - Instruction Manual

1. Enfòmasyon sou Sekirite

Tanpri li epi konprann tout enstriksyon yo anvan ou monte epi itilize li. Kenbe manyèl sa a pou referans pita.

• Kapasite maksimòm pwa: Each barstool is designed to support a maximum weight of 300 liv (136 kg). Do not exceed this limit to prevent injury or damage.
• Asire w tout boulon ak vis yo byen sere anvan w itilize yo. Tcheke yo detanzantan epi sere yo ankò jan sa nesesè.
• Do not stand on the barstool.
• Kenbe ti pati yo lwen timoun yo pandan asanble a.
• Use the barstool on a flat, stable surface.

2. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse asanblaj la. Si gen nenpòt pyès ki manke oswa ki domaje, tanpri kontakte sèvis kliyan.

Note: Your order may arrive in two separate packages at different times.

Image: Barstool dimensions and package information. Each stool supports up to 300 lbs.

Components for One Barstool:

• (1) Seat with Backrest
• (1) Swivel Plate (pre-attached to seat or separate)
• (4) Janm
• (1) Footrest Ring
• Pakè pyès ki nan konpitè (vis, rondelles, kle Allen)

Note: This product includes a set of 4 barstools, so you will receive four sets of the above components.

3. Enstriksyon Asanblaj (Enstalasyon)

Assembly is quick and typically takes less than 15 minutes per stool. Follow these steps carefully:

1. Depake konpozan: Retire tout pyès yo nan anbalaj la avèk prekosyon. Mete yo sou yon sifas mou epi pwòp pou evite reyur.
2. Attach Swivel Plate (if separate): If the swivel plate is not pre-attached to the seat, align it with the pre-drilled holes on the underside of the seat and secure it using the provided screws. Ensure it is centered and tight.
3. Rasanble janm yo: Attach the four legs to the swivel mechanism or seat base. Ensure the legs are oriented correctly as shown in the diagram. Do not fully tighten screws yet.
4. Install Footrest Ring: Connect the footrest ring to the legs. This ring provides stability and a comfortable footrest. Align the holes and insert the screws.
5. Sere final la: Once all parts are loosely assembled, place the stool upright on a flat surface. Apply gentle pressure to ensure all legs are evenly touching the ground. Then, systematically tighten all screws and bolts using the Allen wrench until secure. Do not overtighten.
6. Tcheke estabilite: Gently rock the stool to ensure it is stable and does not wobble. If it wobbles, loosen the screws slightly, adjust, and re-tighten.

Image: Visual guide for barstool assembly steps.

4. Itilizasyon ak Karakteristik (Fonksyonman)

Your KISLOT barstools are designed for comfort and versatility in various settings such as kitchen islands, home bars, or dining areas.

• Fonksyon Pivote 360°: The smooth swivel mechanism allows for effortless rotation, providing flexibility and ease of interaction in any direction.
• Konsepsyon ergonomique: The barrel-curved backrest and plush button-tufted upholstery offer superior lumbar support and comfort for extended seating.
• Wotè Optimal: With a 26-inch seat height, these barstools are ideally suited for countertops ranging from 35 to 37 inches high.
• Pwoteksyon pou pye: The legs are equipped with protective footpads to prevent scratching your floors and ensure stability.

Image: Illustration of 360° swivel and recommended counter height compatibility.

Image: Detail of the ergonomic backrest design.

Image: Detail of the extra thick seat cushion for enhanced comfort.

5. Swen ak Antretyen

Proper care will extend the life and appearance of your barstools.

• Netwayaj twal: The stain-resistant fabric can be easily cleaned. For spills, gently wipe with a dry cloth immediately. For tougher stains, use a mild fabric cleaner and follow the product instructions, testing on an inconspicuous area first.
• Swen ankadreman: Wipe the wooden legs and iron footrest with a dry cloth to remove dust and debris. Avoid abrasive cleaners.
• Tèks regilye: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
• Evite limyè solèy la dirèk: Prolonged exposure to direct sunlight may cause fabric fading.

NAN. Depanaj

Si ou rankontre nenpòt pwoblèm, gade solisyon komen sa yo:

• Wobbling Stool: Ensure all screws are evenly tightened. Loosen all screws slightly, sit on the stool to settle the legs, then re-tighten all screws firmly.
• Creaking Noise: Creaking can sometimes occur due to loose connections. Re-tighten all assembly hardware. Applying a small amount of silicone lubricant to the swivel mechanism or joints may also help.
• Pati ki manke: If you find any parts missing upon unboxing, please contact KISLOT customer support immediately with your purchase details. Do not attempt to assemble with incomplete parts.
• Difficulty Swiveling: Check for any obstructions around the swivel plate. Ensure the stool is on a level surface.

7. Espesifikasyon

8. Garanti ak sipò

KISLOT products are designed for quality and durability. We stand by our products with the following:

• Garanti: Pwodwi sa a kouvri pa yon 1-ane garanti apati dat acha a, ki kouvri domaj fabrikasyon.
• Sipò Kliyan: For any questions, missing parts, or warranty claims, please contact our customer support team.

Imèl: Cs.furniture@outlook.com

Please include your purchase details (order number, date of purchase) when contacting support for faster assistance.