Manyèl Enstriksyon Oratè Koaksyal 2-Vway Alpine DM-65-G Seri DM 6.5 pous

Entwodiksyon

Thank you for choosing the Alpine DM-65-G DM Series 6.5-inch 2-Way Coaxial Speakers. These speakers are designed to deliver high-quality audio performance in your vehicle. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your product. Please read this manual thoroughly before installation and keep it for future reference.

Enfòmasyon sou Sekirite

Observe the following safety precautions to prevent injury or damage to the product and vehicle:

• Enstalasyon pwofesyonèl rekòmande: Installation of car audio components may require experience with electrical wiring and vehicle disassembly. If you are unsure, consult a qualified professional.
• Dekonekte batri: Before starting any electrical work, disconnect the negative terminal of your vehicle's battery to prevent short circuits.
• Sèvi ak zouti ki kòrèk yo: Asire w ou gen zouti ki apwopriye yo pou enstalasyon an.
• Sekirize fil elektrik: Route all wiring carefully to avoid pinching, chafing, or interference with vehicle moving parts. Use grommets when passing wires through metal panels.
• Proper Impedance Matching: Asire w amplifier or head unit is compatible with the speaker's 4 Ohm impedance. Incorrect impedance can damage your equipment.
• Evite twòp pouvwa: Do not exceed the speaker's maximum power handling (200W Peak / 50W RMS) to prevent damage.

Kontni pake

Verifye ke tout atik yo prezan nan pakè a:

• Alpine DM-65-G 6.5-inch Coaxial Speakers (Pair)
• Materyèl pou monte (vis, klip)
• Oratè Grilles
• Kat Garanti
• Manyèl Enstriksyon (dokiman sa a)

Image: A pair of Alpine DM-65-G 6.5-inch coaxial speakers. One speaker is shown from the front, highlighting the cone and tweeter, while the other is angled to show its depth and magnet structure.

Enstalasyon ak Enstalasyon

This section provides general guidelines for installing your Alpine DM-65-G speakers. Specific vehicle requirements may vary.

1. Planifikasyon ak Preparasyon

• Chwazi Kote Montaj: Identify suitable locations in your vehicle (e.g., door panels, rear deck) that accommodate 6.5-inch speakers. Ensure there is sufficient depth for the speaker magnet.
• Tcheke Likidasyon: Verify that the speaker will not interfere with window mechanisms, door panels, or other vehicle components.
• Rasanble zouti: You will typically need screwdrivers, wire strippers, crimpers, a drill, and possibly a panel removal tool.

Imaj: Yon pwofesyonèl bò kotefile view of the Alpine DM-65-G speaker, illustrating the depth of the magnet structure and the speaker frame, which is crucial for checking mounting clearance.

2. Speaker Removal (if replacing existing speakers)

• Carefully remove the existing speaker grilles and speakers.
• Disconnect the wiring from the old speakers.

3. Monte Oratè yo

• Position the new Alpine DM-65-G speaker in the desired location.
• Mark the screw holes. If new holes are required, drill pilot holes carefully.
• Secure the speaker using the provided mounting screws. Do not overtighten.

Imaj: Yon fasad dirèk view of a single Alpine DM-65-G coaxial speaker, showing the speaker cone, the integrated tweeter, and the mounting holes around the perimeter.

4. Koneksyon fil elektrik

• Konekte fil pozitif (+) oratè a nan men ou amplifier/head unit to the positive terminal on the speaker.
• Konekte fil negatif (-) oratè a nan men ou amplifier/head unit to the negative terminal on the speaker.
• Asire w tout koneksyon yo byen fèm epi byen izole pou anpeche kous kout.

Imaj: Yon gwo plan view of the center of the Alpine DM-65-G speaker, detailing the integrated tweeter and the Alpine logo on the speaker cone. This area houses the coaxial tweeter element.

5. Testing and Reassembly

• Rekonekte batri machin nan.
• Test the speakers with your audio system to ensure they are functioning correctly.
• Once confirmed, reassemble any removed vehicle panels and speaker grilles.

Enstriksyon Operasyon

The Alpine DM-65-G speakers operate as part of your vehicle's audio system. Once properly installed and connected to a compatible amplifier or head unit, they will reproduce audio signals.

• Kontwòl Volim: Adjust the volume through your head unit or amplifier. Avoid excessively high volumes that cause distortion, as this can damage the speakers.
• Anviwònman odyo: Utilize your head unit's equalizer and sound processing features to fine-tune the audio output to your preference.
• Peryòd enskripsyon: Allow a short break-in period (typically 10-20 hours of normal listening) for the speaker components to loosen up and achieve optimal sound quality.

Antretyen

Minimal maintenance is required for your Alpine DM-65-G speakers:

• Netwayaj: Gently wipe the speaker grilles and surrounds with a soft, dry cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
• Enspeksyon: Tcheke koneksyon fil elektrik yo detanzantan pou wè si gen dezòd oswa korozyon.
• Pwoteksyon anviwònman: Ensure speakers are protected from direct water exposure and extreme temperatures.

Depanaj

Si w gen pwoblèm ak oratè w yo, gade etap depanaj komen sa yo:

If these steps do not resolve the issue, please contact Alpine customer support or your authorized dealer.

Espesifikasyon

Enfòmasyon sou Garanti

The Alpine DM-65-G speakers come with a 1 Year Manufacturer's Limited Warranty. This warranty covers defects in materials and workmanship under normal use. Please refer to the included Warranty Card for complete terms and conditions, including details on how to obtain service.

Kenbe resi acha ou a kòm prèv acha pou reklamasyon garanti.

Sipò

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact Alpine customer support or your authorized Alpine dealer.

Vizite Alpine ofisyèl la websit la pou jwenn enfòmasyon sipò ak enfòmasyon kontak ki pi ajou yo: www.alpine-usa.com/support