SNIXWOO Lockable Roof Racks Cross Bars Instruction Manual

1. Pwodwi souview

The SNIXWOO Lockable Roof Racks Cross Bars are designed to enhance the cargo capacity of your Mazda CX-70 or CX70 PHEV 2025. These cross bars provide a secure and versatile platform for transporting various outdoor gear and accessories.

Karakteristik kle:

• Konpatibilite presi: Specifically designed to fit Mazda CX70 & CX-70 PHEV 2025 models, integrating with factory side rails for a secure fit.
• Durabilite solid: Constructed from heavy-duty steel with a corrosion-resistant black powder coating for long-lasting performance in diverse weather conditions.
• Konsepsyon versatile: Accommodates a wide range of accessories, including ski racks, bike mounts, and watersport carriers.
• Pèfòmans trankil: Aluminum construction minimizes wind resistance and noise for a more enjoyable driving experience.
• Enstalasyon san pwoblèm: Easy installation without drilling, featuring a clamp locking system and included hardware.

2. Ki sa ki nan bwat la

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• Cargo Bar Kit
• Manyèl enstalasyon
• Mounting Hardware (includes hex socket wrench, Allen wrench, spare screws, and keys)

Image 1: Complete set of SNIXWOO Lockable Roof Racks Cross Bars and included tools.

3. Enstalasyon ak Enstalasyon

Follow these steps for proper installation of your SNIXWOO roof racks. Ensure your vehicle is parked on a level surface and the engine is off.

Konsiderasyon enpòtan:

• Do not cut the bars or scrape the plastic headers. These crossbars are vehicle specific, and bar lengths vary by model.
• If one bar is longer than the other, the front of your vehicle is wider than the back. In this case, install the longer bar on the front and the shorter bar on the rear.
• If you cannot fit it, re-check the instructions as a point might have been missed.
• If you cut the bars or do not insert cross bars fully into the mount, the bars' carrying capacity will decrease.

Etap enstalasyon:

1. Prepare ba kwa yo:
   Identify the longer bar for the front and the shorter bar for the rear. The pointed end of each bar should face the rear of your vehicle, and the round end should face the front.
2. Attach End Supports:
   Screw the end supports to the crossbars. Do not fully tighten the screws at this stage pou pèmèt ajisteman.
3. Remove Lock Cover:
   Push to open the cap or use a tool to pry it open. Insert the key horizontally and turn 90 degrees anti-clockwise to unlock the base, then remove the outer cover.
4. Pozisyon sou machin nan:
   Carefully place the assembled cross bars onto your vehicle's factory side rails. For the front bar, ensure its position does not interfere with the sunroof's operation.
5. Ajiste epi sere boulon:
   Dekole vis yo sou cl laamps so that the lower clamp can move. Move the lower clamp into position under the side rail. Tighten the screws using the provided Allen key. Ensure both driver and passenger side screws are tightened simultaneously to ensure even pressure.
6. Sekirite Locks:
   Once satisfied with the position and tightness, put the lock mechanism back and lock it with the key. Replace the plastic lock cover.

Image 2: Detailed steps for removing the lock cover to access mounting screws.

Image 3: Visual guide for the hassle-free installation process of the cross bars.

Videyo enstalasyon:

4. Operasyon Enstriksyon

Once installed, your SNIXWOO roof racks are ready for use. The maximum load capacity for these cross bars is 165 liv. Always distribute weight evenly and secure cargo properly.

Konsèy Itilizasyon:

• The crossbars feature an anti-theft design with integrated locks for added security.
• The length of the crossbar can be adjusted to fit your specific cargo needs.
• The aerodynamic design helps minimize wind noise and resistance during travel.

Image 4: Close-up of the anti-theft lock and adjustable length mechanism.

Imaj 5: Egzanpamples of outdoor gear that can be transported using the roof racks.

Gid Sekirite:

• Prepare special carriers when loading surfboards, kayaks, snowboards, etc.
• Use fixing devices to secure the front and rear of long, large items.
• Maintain proper speed based on the load weight and road conditions.
• Check the tightness of all fasteners after a short distance of travel.

Image 6: Visual representation of safety tips for securing cargo.

Image 7: Further safety guidelines for driving with roof-mounted cargo.

5. Antretyen

To ensure the longevity and optimal performance of your roof racks, regular maintenance is recommended:

• Periodically check all bolts and fasteners for tightness, especially after long trips or carrying heavy loads.
• Clean the cross bars with mild soap and water. Avoid abrasive cleaners that could damage the finish.
• Inspect the plastic components and rubber strips for any signs of wear or damage. Replace if necessary.

NAN. Depanaj

If you encounter any issues with your SNIXWOO roof racks, consider the following:

• Bri sifle: Some users report a whistling noise when driving. This can sometimes be mitigated by adjusting the position of the bars or adding a fairing (not included). Ensure all components are tightly secured.
• Difikilte ak enstalasyon: Double-check all steps in the installation guide. Ensure the correct bar (longer for front, shorter for rear) is used and that the clamps are properly aligned with the vehicle's side rails.
• Pati ki domaje: If any parts are damaged during installation or use, please contact customer support for assistance.

7. Espesifikasyon

8. Garanti ak sipò

For any questions, concerns, or assistance with installation or product support, please contact the seller directly. You can typically do this by clicking or tapping the seller's name on the product page or by navigating to 'Your Orders' and selecting 'Get help' or 'Get product support'. The seller aims to respond with a solution within 24 hours.