Entwodiksyon
Mèsi pou acha aasing the BESIGN BK06 and BK03 Bluetooth Car Kit. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and safety.
The BESIGN BK06 is a versatile Bluetooth speakerphone designed for hands-free communication and audio streaming in your vehicle. The BESIGN BK03 is a compact Bluetooth remote control and receiver, offering convenient control over your calls and music.
Enfòmasyon sou Sekirite
For your safety and to prevent damage to the device, please observe the following precautions:
- Prekosyon pou manyen batri: Do not expose the device to extreme temperatures, direct sunlight, or open flames. Do not disassemble or puncture the battery. Dispose of batteries according to local regulations.
- Entèferans potansyèl: This device operates using radio frequencies and may cause interference with other electronic devices, including medical devices. Maintain a safe distance from such devices.
- Bon jete: At the end of its life cycle, dispose of this product responsibly at designated collection points for electronic waste. Do not dispose of with household waste.
- Do not operate the device while driving if it distracts you from safe driving. Always prioritize road safety.
- Kenbe aparèy la lwen dlo ak lòt likid.
- Netwaye aparèy la sèlman avèk yon twal mou epi sèk.
Kontni pake
Tanpri tcheke pake a pou atik sa yo:
- BESIGN BK06 Bluetooth Speakerphone
- BESIGN BK03 Bluetooth Remote Control/Receiver
- USB Charging Cable (for BK03)
- Auxiliary Out Cable (3.5mm audio cable for BK03)
- Car Cigarette Lighter USB Charger
- Visor Clip (pre-attached to BK06)
- Air Vent Clip (for BK03)
- Adhesive Sticker (for BK03)
- Ground Loop Noise Isolator (for BK03)
- Manyèl Itilizatè (dokiman sa a)
Imaj: Plis paseview of the BESIGN BK06 speakerphone and the BK03 remote control with its accessories, including cables and charging adapter.
Image: Detailed diagram of the BESIGN BK03 Car Kit components, showing the remote control, USB charging cable, auxiliary out cable, air vent clip, and adhesive sticker with their approximate lengths.
Karakteristik pwodwi
- Apèl men lib: Make and receive calls safely while driving.
- Kalite son Premium: Built-in dual 2W speakers for clear audio.
- Motion Sensor Auto Power On/Off: The BK06 automatically powers on when you open the car door and turns off when you close it.
- Rekonekte otomatik: Automatically connects to the last paired device.
- Mizik difizyon: Koute odyo an dirèk depi aparèy ou ki gen Bluetooth la.
- Anilasyon bri: Redui bri anbyans pou apèl ki pi klè.
- GPS Instruction Support: Hear navigation prompts through the speaker.
- Voice Command/Siri Support: Activate your phone's voice assistant.
- Ground Loop Noise Isolator: Included with BK03 to eliminate buzzing noise when playing music via AUX.
Image: Close-up of the BESIGN BK06 speakerphone highlighting its dual 2W speakers for premium sound quality.
Image: Illustration showing the BESIGN BK06 mounted on a car visor, demonstrating its built-in motion sensor that automatically powers the device on when the car door is opened.
Image: A driver in a car, with icons representing the key functions of the car kit: music playback, noise cancellation, hands-free phone calls, and incoming call alerts.
Image: The BESIGN BK06 speakerphone next to a smartphone displaying a GPS navigation map, illustrating the device's ability to support GPS instructions.
Enstalasyon ak Enstalasyon
Installing the BESIGN BK06 Speakerphone
- Attach the BK06 to your car's sun visor using the integrated clip. Ensure it is securely fastened and does not obstruct your view.
- Slide the power switch on the side of the BK06 to the "ON" position. The device will automatically power on when you open the car door and power off when you close it.
Installing the BESIGN BK03 Remote Control
The BK03 can be installed in two ways:
- Using the Air Vent Clip: Attach the BK03 to a suitable air vent in your car using the provided clip.
- Using the Adhesive Sticker: Clean the desired surface on your dashboard or console. Peel off the protective film from the adhesive sticker and firmly press the BK03 onto the surface.
Connect the BK03 to your car's audio system via the 3.5mm Auxiliary Out Cable if you wish to stream audio through your car speakers. If you experience buzzing noise, connect the included Ground Loop Noise Isolator between the BK03 and your car's AUX input.
Image: The BESIGN BK03 remote control installed in a car, connected to the car's audio system via AUX, demonstrating the use of the Ground Loop Noise Isolator to eliminate buzzing sounds.
Pairing ak telefòn ou
- Ensure both the BK06 and BK03 are powered on.
- Sou telefòn entelijan ou an, aktive Bluetooth epi chèche aparèy ki disponib yo.
- Select "BESIGN BK06" or "BESIGN BK03" from the list of devices.
- Once connected, the device will indicate successful pairing (e.g., a voice prompt or LED indicator change).
- The devices will automatically reconnect to your phone when in range and powered on.
Enstriksyon Operasyon
BESIGN BK06 Speakerphone Operation
- Limen/Etenyen: Use the side switch. The motion sensor will manage daily power cycles when the switch is ON.
- Kontwòl Volim: Use the '+' and '-' buttons on the BK06 to adjust speaker volume.
- Mikwofòn bèbè: Press the microphone button to mute/unmute during a call.
- Gestion apèl: The green button answers calls, the red button ends calls.
BESIGN BK03 Remote Control Operation
The BK03 provides convenient control for calls and music. Refer to the diagram below for button identification.
Image: Detailed guide to the BESIGN BK03 remote control buttons and their corresponding functions for call management and music control.
| Fonksyon | Aksyon |
|---|---|
| Reponn apèl: | Press the blue button once. |
| Fini apèl: | Press the red button once. |
| Rejte apèl: | Press the red button once. |
| Refè dènye nimewo a: | Double press the blue button. |
| Mute & Un-mute call: | Press and hold the Previous Track button for 2 seconds. |
| Transfer Call (BK03 to Phone or Vice Versa): | Peze epi kenbe bouton ble a pou 1.5 segonn. |
| Siri or Voice Command: | In standby mode, press & hold the blue button for 2 seconds. |
| Two Phones Switching: | During a call, Double Press the blue button to switch between two mobile phones. |
| Music Pause/Resume: | Press the blue button once. |
| Track Previous: | Press the Previous Track button (triangle up) once. |
| Pwochen Track: | Press the Next Track button (triangle down) once. |
Depanaj
If you encounter issues with your BESIGN Bluetooth Car Kit, please refer to the following common solutions:
- Aparèy pa soumen: Ensure the BK06 side switch is in the "ON" position. Check if the BK03 is charged.
- Pa ka konekte ak telefòn nan:
- Asire w ke Bluetooth aktive sou telefòn ou.
- Make sure the device is in pairing mode (usually indicated by a flashing LED).
- Delete previous pairings from your phone's Bluetooth list and try pairing again.
- Restart both your phone and the car kit.
- No audio or low volume:
- Check the volume levels on both the car kit and your phone.
- Ensure the BK03's AUX cable is securely connected to your car's AUX input.
- If using the BK03 with AUX, ensure the Ground Loop Noise Isolator is correctly installed if experiencing buzzing.
- Buzzing or static noise (BK03 AUX connection): Use the included Ground Loop Noise Isolator. Connect it between the BK03's 3.5mm output and your car's 3.5mm AUX input.
- Motion sensor not working (BK06): Ensure the BK06 is securely mounted on the sun visor and the power switch is ON. The sensor detects movement to activate.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak: | BESIGN |
| Modèl: | BK06, BK03 |
| Koneksyon Teknoloji: | Bluetooth, AUX |
| Estanda kominikasyon san fil: | Bluetooth |
| Koulè: | Nwa |
| Sous pouvwa: | Car Cigarette Lighter (via included adapter), Internal Battery |
| Speaker Output (BK06): | Doub Oratè 2W |
| Karakteristik espesyal: | Motion Sensor Auto Power On/Off (BK06), Noise Cancellation, GPS Instruction Support, Voice Command/Siri Support, Ground Loop Noise Isolator (BK03) |
Antretyen
To ensure the longevity and optimal performance of your BESIGN Bluetooth Car Kit, follow these maintenance guidelines:
- Netwayaj: Use a soft, dry, lint-free cloth to clean the device. Do not use abrasive cleaners, solvents, or strong chemicals, as they may damage the surface or internal components.
- Depo: Lè w pa itilize aparèy la pou yon bon bout tan, sere l nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
- Swen batri: For devices with internal rechargeable batteries (like BK06), avoid fully discharging the battery frequently. Charge the device regularly, even if not in constant use, to maintain battery health.
- Evite domaj fizik: Do not drop, hit, or expose the device to strong impacts.
Garanti ak sipò
BESIGN products are designed for reliability and performance. For warranty information and customer support, please refer to the documentation included with your purchase or visit the official BESIGN website. If you experience any issues not covered in this manual, please contact BESIGN customer service for assistance.
Règleman retounen: The product has a 30-day refund/replacement policy from the date of purchase.
Manifakti: BESIGN
