Baseus Super Energy Pro+ Jump Starter Powerbank User Manual

1. Entwodiksyon

The Baseus Super Energy Pro+ Jump Starter Powerbank is a versatile device designed to jump-start 12V vehicles and serve as a portable power bank for electronic devices. It features a 12,000mAh battery capacity and a peak current of 1200A, suitable for various vehicle types.

Image 1.1: Baseus Super Energy Pro+ Jump Starter Powerbank shown with different vehicle types, illustrating its broad compatibility.

2. Pwodwi souview ak Karakteristik

This device combines the functionality of a car jump starter and a power bank. Key features include:

• Segondè pik aktyèl: Provides up to 1200A peak current for effective vehicle starting.
• Kapasite batri: 12,000mAh / 44.4Wh for multiple uses.
• Multi-fonksyonèl: Serves as both a jump starter and a portable power bank.
• Ekspozisyon dijital: Endike nivo chaj batri a.
• Limyè ijans ki ap dirije: Features multiple lighting modes for safety.
• Pwoteksyon polarite ranvèse: Integrated safety mechanism to prevent damage from incorrect connections.
• Lajè konpatibilite: Suitable for 12V vehicles with engines up to 8L (diesel) or 3.5L (gasoline).

Image 2.1: The jump starter displaying its digital battery percentage and highlighting its 1200A peak current capability.

Image 2.2: Visual representation of the 1200A high current output, powered by a 3-battery system.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• 1x Baseus Super Energy Pro+ Jump Starter Powerbank
• 1x Power Cable (USB-C)
• 1x Car Cable (EC5/Clamps)

4. Getting Started: Charging the Device

Before initial use, fully charge the jump starter. It is recommended to keep the device charged above 50% for optimal performance.

1. Connect the provided USB-C power cable to the jump starter's input port.
2. Konekte lòt bout kab USB-C a nan yon adaptè kouran USB konpatib (pa enkli).
3. The digital display will show the charging progress. Charge until the display indicates 100%.

Imaj 4.1: Kote view of the jump starter, illustrating the various ports for charging and output.

5. Operasyon Enstriksyon

5.1. Demaraj machin ou avèk èd yon aparèy

Asire w ke demarè a byen chaje anvan ou eseye demarre yon machin.

1. Connect the Smart Ignition Terminals: Insert the smart ignition terminals (EC5 connector) into the jump starter's EC5 interface. The indicator lights on the terminals will flash red and green, indicating readiness.
2. Konekte ak batri machin nan: Open the car's hood. Connect the red clamp nan tèminal pozitif (+) batri machin lan ak cl nwa aamp nan tèminal negatif (-).
3. Kòmanse machin nan: Retounen nan machin nan epi limen motè a.
4. Dekonekte: Once the car starts, immediately disconnect the jump starter from the car battery. First remove the clamps from the battery terminals, then disconnect the smart ignition terminals from the jump starter.

Image 5.1: A user connecting the jump starter clamps to a car battery, demonstrating the correct procedure.

5.2. Itilizasyon kòm yon Bank Pouvwa

The jump starter can charge mobile phones, tablets, and other USB-powered devices.

• Connect your device's charging cable to one of the USB-A output ports on the jump starter.
• Demarè a ap kòmanse chaje aparèy ou an otomatikman.

5.3. Itilizasyon Limyè LED Ijans lan

The built-in LED light offers multiple modes for various situations.

• Press and hold the power button to turn on the emergency lighting mode.
• Press the power button again to cycle through SOS mode and Strobing mode.
• Press and hold the power button again to turn off the light.

Image 5.2: The jump starter's emergency LED light illuminating an engine bay, showing its utility in low-light conditions.

6. Prekosyon sekirite

• Do not short-circuit the jump starter.
• Do not expose the device to extreme temperatures (above 60°C or below -20°C).
• Kenbe soti nan atenn timoun yo.
• Pa demonte oswa modifye aparèy la.
• Ensure correct polarity when connecting to a car battery. The smart clamps feature reverse polarity protection, which will trigger an alarm if connected incorrectly.
• Disconnect the jump starter immediately after the vehicle starts.

Image 6.1: Close-up of the smart clamps, emphasizing the built-in reverse polarity protection feature.

7. Antretyen ak Depo

• Sere starter so a nan yon kote ki fre, sèk lwen limyè solèy la dirèk.
• Charge the device every 3-6 months if not in regular use to maintain battery health.
• Netwaye aparèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui chimik ki agresif oswa materyèl abrazif.

NAN. Depanaj

• Aparèy pa limen: Ensure the device is charged. If the battery level is very low, it may require a few minutes of charging before it can power on.
• Machin nan pa demarre: Tcheke si clamps are securely connected to the correct battery terminals (red to positive, black to negative). Ensure the jump starter has sufficient charge. The vehicle's battery may be severely discharged or damaged, requiring professional assistance.
• Reverse polarity alarm: Si klozèt entelijan anamps emit a buzzing sound, disconnect them immediately and re-attach them to the correct battery terminals.
• Charging slow or not at all: Asire w kab chaje a ak adaptè a ap fonksyone byen.

9. Espesifikasyon teknik

Image 9.1: Display of various international certifications for the product, ensuring compliance and safety standards.

10. Garanti ak sipò

Pou enfòmasyon sou garanti a oswa sipò teknik, tanpri al gade paj ofisyèl Baseus la. websit la oubyen kontakte détayan lokal ou a. Kenbe resi acha ou a pou reklamasyon garanti.